MEIKEE LED Flood Light

pengenalan

Thank you for choosing the MEIKEE LED Flood Light. This manual provides essential information for the safe installation, operation, and maintenance of your new flood light. Please read these instructions thoroughly before use and retain them for future reference.

Arahan Keselamatan

AMARAN: Kegagalan mematuhi arahan ini boleh mengakibatkan renjatan elektrik, kebakaran atau kecederaan serius.

• Sentiasa putuskan sambungan kuasa sebelum pemasangan, penyelenggaraan atau pembersihan.
• Pastikan bekalan kuasa voltage matches the product's requirements (100-240V AC).
• Pemasangan hendaklah dilakukan oleh juruelektrik bertauliah jika anda tidak pasti.
• Jangan ubah suai produk dalam apa jua cara.
• Avoid looking directly into the light source when it is illuminated, as it may cause eye strain or damage.
• Jauhkan bahan mudah terbakar dari lekapan lampu.
• Ensure the mounting surface is strong enough to support the weight of the fixture.
• The product is IP66 waterproof, suitable for outdoor use, but should not be submerged in water.

Kandungan Pakej

Sahkan bahawa semua komponen terdapat dalam pakej:

• 2 x MEIKEE 60W LED Flood Lights with Plug
• 1 x Manual Pengguna
• 2 x Screw Packs for installation

Spesifikasi

Persediaan dan Pemasangan

The MEIKEE LED Flood Light features a flexible bracket for various mounting options. Ensure the power is disconnected before beginning installation.

1. Pilih Lokasi Pemasangan: Select a suitable location that provides the desired illumination and can securely support the light fixture. The flood light can be wall-mounted, ground-mounted, or ceiling-mounted.
2. Tandakan Titik Penggerudian: Use the mounting bracket as a template to mark the drilling points on your chosen surface.
3. Lubang gerudi: Drill appropriate holes for the screws. Insert wall anchors if necessary for your mounting surface.
4. Selamatkan Braket: Pasang pendakap pelekap pada permukaan menggunakan skru yang disediakan.
5. Pasang Cahaya: Secure the flood light to the mounted bracket.
6. Laraskan Sudut: Loosen the screws on the side of the bracket to adjust the light's angle up to 180 degrees. Tighten the screws once the desired angle is achieved.
7. Sambungkan Kuasa: Plug the flood light into a suitable power outlet.

Arahan Operasi

The MEIKEE LED Flood Light is designed for simple operation.

1. Hidupkan kuasa: Once properly installed and plugged into a power source, the light will turn on.
2. Matikan: To turn off the light, disconnect it from the power source.

Penyelenggaraan

Penyelenggaraan berkala memastikan prestasi optimum dan jangka hayat lampu limpah anda.

• Pembersihan: Periodically clean the surface of the light with a soft, damp kain. Jangan gunakan pembersih atau pelarut yang kasar. Pastikan lampu dimatikan dan sejukkan sebelum membersihkan.
• Pemeriksaan: Regularly check the power cord for any damage. Inspect the mounting bracket and screws to ensure they remain secure.
• Tiada Bahagian Boleh Diservis Pengguna: The LED light source is integrated and not replaceable. Do not attempt to open or repair the fixture.

Menyelesaikan masalah

If you encounter issues with your MEIKEE LED Flood Light, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact MEIKEE customer support.

Waranti

MEIKEE products are covered by a Waranti 2 tahun dari tarikh pembelian. Waranti ini meliputi kecacatan bahan dan mutu kerja di bawah penggunaan biasa. Ia tidak meliputi kerosakan yang disebabkan oleh salah guna, kemalangan, pengubahsuaian tanpa kebenaran atau pemasangan yang tidak betul.

Sokongan Pelanggan

For any questions, technical assistance, or warranty claims, please contact MEIKEE customer support. You can reach us by sending an email via Amazon or using the email address provided in the product packaging. We aim to provide a timely response within 24 hours.