JJRC H36 Mini RC Quadcopter Drone User Manual

1. Pengenalan

The JJRC H36 is a compact and agile mini RC quadcopter drone designed for both indoor and outdoor flight. Featuring a 6-axis gyro for stable flight, 2.4GHz control for anti-interference, and functions like 3D-flips and headless mode, it offers an engaging flying experience. This manual provides essential information for the safe and effective operation of your H36 drone.

2. Produk Lebihview

2.1 Ciri-ciri Utama

• Sci-fi design with fine workmanship.
• LED lights for night flight visibility.
• 2.4GHz technology for anti-interference control.
• 360° propeller protectors for enhanced safety.
• High/low speed switch for varied flight conditions.
• 3D-flip function for acrobatic maneuvers.
• Headless mode for simplified orientation control.
• One-key return function for easy recall.
• Newest 6-Axis Gyro control system for stable flight.

2.2 Kandungan Pakej

• 1 x JJRC H36 Quadcopter
• 1 x Pemancar 2.4G (Mod 2)
• 2 x Bateri Li-Po 3.7V 150mAh
• 1 x Kabel Pengecas USB
• 4 x Kipas Ganti
• 1 x Manual Bahasa Inggeris

Image 1: The JJRC H36 drone, two 150mAh Li-Po batteries, and the 2.4G remote controller.

Imej 2: Gambar jarak dekat view of the JJRC H36 drone, highlighting its compact design and propeller protectors.

3. Maklumat Keselamatan

3.1 Amaran Am

• Model RC ini bukan mainan dan tidak sesuai untuk kanak-kanak di bawah umur 14 tahun. Jauhkan daripada kanak-kanak.
• Carefully read the instruction manual before any use. If you are a beginner, it is advisable to be assisted by an experienced adult.
• This RC drone is equipped with coreless DC motors; continuous use with different batteries is not suggested to prevent motor damage.

3.2 Battery Cautions

• Jangan cas bateri secara berlebihan atau nyahcas bateri secara berlebihan.
• Do not place batteries near high-temperature conditions.
• Jangan buang bateri ke dalam api.
• Jangan buang bateri ke dalam air.
• The USB charger is only for DC computer USB ports; never use it with AC circuits.
• Always remember never to over-charge the battery.

4. Persediaan

4.1 Mengecas Bateri Dron

1. Connect the drone battery to the provided USB charging cable.
2. Plug the USB charging cable into a computer's USB port.
3. Masa pengecasan adalah lebih kurang 50 minit. Jangan cas berlebihan.

4.2 Memasang Bateri Dron

1. Pastikan dron dimatikan.
2. Carefully insert the charged 3.7V 150mAh Li-Po battery into the drone's battery compartment.
3. Selamatkan penutup petak bateri.

4.3 Memasang Bateri Pemancar

1. Open the battery compartment on the back of the 2.4G transmitter.
2. Insert two AA batteries (not included), ensuring correct polarity.
3. Tutup penutup petak bateri.

Imej 3: Gambar jarak dekat view of the JJRC H36 remote controller, showing its controls and power switch.

4.4 Binding the Drone with Transmitter

1. Pastikan bateri dron dicas sepenuhnya.
2. Letakkan drone di permukaan rata dan rata.
3. Hidupkan dron.
4. Within 2 seconds, power on the transmitter.
5. The drone's lights will stop flashing and become solid, indicating a successful binding.

5. Arahan Operasi

5.1 Kawalan Asas Penerbangan

The 2.4G transmitter (Mode 2) controls the drone's movement:

• Tongkat Kiri (Pendikit/Kuap):
  • Up/Down: Increase/Decrease altitude.
  • Left/Right: Rotate drone left/right (yaw).
• Kayu Kanan (Pitch/Roll):
  • Up/Down: Move drone forward/backward (pitch).
  • Left/Right: Move drone left/right (sideward flight/roll).

5.2 Fungsi Khas

• Suis Kelajuan Tinggi/Rendah: Press the designated button on the transmitter to toggle between high and low-speed modes, suitable for different flying environments and skill levels.
• 3D-Flip Function: To perform a 3D-flip, fly the drone to a sufficient height, then press the 3D-flip button and push the right stick in the desired flip direction (forward, backward, left, or right).
• Mod Tanpa Kepala: Activate headless mode by pressing the dedicated button. In this mode, the drone's orientation is relative to the pilot, regardless of the drone's actual front direction. Press again to exit.
• Pulangan Satu Kunci: Press the one-key return button, and the drone will attempt to fly back towards its take-off point. This function is an aid and not a precise landing system.

6. Penyelenggaraan

• Pemeriksaan baling-baling: Regularly check propellers for any damage (bends, cracks). Replace damaged propellers with spare ones provided in the package. Ensure propellers are installed correctly.
• Pembersihan: Use a soft, dry cloth to clean the drone and transmitter. Avoid using water or solvents.
• Storan: When not in use, store the drone and transmitter in a cool, dry place, away from direct sunlight. Remove batteries from the transmitter if storing for extended periods.

7. Penyelesaian masalah (Soalan Lazim)

• The aircraft fails to connect with the transmitter.
  Pertama, pastikan bateri dicas sepenuhnya. Kemudian, hidupkan dron dan pemancar dalam masa 2 saat antara satu sama lain.
• One or more motors do not work.
  Ensure the drone was placed on a flat surface during the binding process. If the issue persists, the motor may be damaged and require replacement.
• Accessories are missing from the package.
  Carefully check the gift box package inside and outside. If items are still missing, contact customer service.
• The aircraft is out of balance (cannot fly, deviates, spins on the ground).
  Check that the propellers are installed in the correct way and are not damaged. Ensure the drone was calibrated on a flat surface during binding.
• During charging, the battery and charging cable melt.
  The USB charger is only designed for DC computer USB ports. Never use it with AC circuits. Always ensure not to over-charge the battery.

8. Spesifikasi

9. Waranti dan Sokongan

Untuk maklumat jaminan atau sokongan teknikal, sila rujuk dasar peruncit atau hubungi pengilang secara langsung. Simpan resit pembelian anda sebagai bukti pembelian.