1. Pengenalan
Thank you for choosing the CASO SJW 500 Design Slow Juicer. This appliance is designed to extract juice from fruits, vegetables, and herbs efficiently, preserving nutrients through its slow juicing technology. This manual provides essential information for safe operation, assembly, use, and maintenance of your new slow juicer.
The CASO SJW 500 features a large 75 mm filling opening, allowing for whole fruits like apples and pears to be juiced without extensive pre-cutting. Its slow rotation speed (50-60 RPM) minimizes heat generation and oxidation, resulting in a higher yield of nutrient-rich juice compared to traditional juicers. The device also includes a special sieve for preparing sorbets, expanding its versatility.
Image 1.1: The CASO SJW 500 Slow Juicer with a selection of fruits and vegetables.
2. Arahan Keselamatan
Sila baca semua arahan keselamatan dengan teliti sebelum menggunakan perkakas untuk mengelakkan kecederaan atau kerosakan. Simpan manual ini untuk rujukan masa hadapan.
- Pastikan voltage yang ditunjukkan pada perkakas sepadan vol utama tempatan andatage sebelum menyambung.
- Jangan rendam tapak motor di dalam air atau sebarang cecair lain. Bersihkan hanya denganamp kain.
- Keep hands and utensils away from the feeding chute during operation to prevent injury. Always use the food pusher provided.
- Do not operate the appliance if the power cord, plug, or any other part is damaged. Contact authorized service personnel for repair.
- Perkakas ini tidak dimaksudkan untuk digunakan oleh orang (termasuk kanak-kanak) yang kurang keupayaan fizikal, deria, atau mental, atau kurang pengalaman dan pengetahuan, melainkan mereka telah diberi pengawasan atau arahan mengenai penggunaan perkakas oleh orang yang bertanggungjawab untuk keselamatan mereka .
- Cabut plag perkakas daripada soket kuasa sebelum memasang, membuka atau membersihkan.
- Jangan gunakan perkakas untuk tujuan selain dari penggunaannya.
- Elakkan daripada menyentuh bahagian yang bergerak.
- Pastikan semua bahagian dipasang dengan betul sebelum mengendalikan pemerah jus.
3. Produk Lebihview dan Komponen
Familiarize yourself with the various parts of your CASO SJW 500 Slow Juicer:
- Pangkalan Motor: Mengandungi motor dan suis kawalan.
- Pelongsor Pemakanan: Large opening for inserting fruits and vegetables.
- Penolak makanan: Used to guide ingredients into the chute.
- Juicing Chamber: Transparent housing where juicing occurs.
- Auger (Pressing Screw): Slowly crushes and presses ingredients.
- Ayak: Separates juice from pulp. Includes a fine sieve for juice and a coarse sieve for sorbet.
- Sieve Frame: Holds the sieve in place.
- Juice Outlet with Drip-Stop: Untuk mengeluarkan jus yang diekstrak.
- Pulp Outlet: For expelling dry pulp.
- Bekas Jus: Collects the fresh juice.
- Bekas Pulpa: Collects the separated pulp.
- Suis Kawalan: ON/OFF/REV (Reverse) functions.
- Berus Pembersih: Untuk memudahkan pembersihan komponen.
Image 3.1: The motor base of the juicer.
Image 3.2: The feeding chute.
Image 3.3: The juice outlet with drip-stop.
Image 3.4: The assembled juicing chamber with sieve.
Image 3.5: The fine mesh sieve.
Image 3.6: The auger (pressing screw).
Image 3.7: The sieve frame.
Image 3.8: The juice container.
Image 3.9: The pulp container.
Image 3.10: The control switch.
4. Persediaan dan Pemasangan
Before first use, wash all removable parts (except the motor base) with warm soapy water, rinse thoroughly, and dry. Ensure the appliance is unplugged during assembly.
- Letakkan tapak motor pada permukaan yang stabil dan rata.
- Insert the sieve frame onto the motor base, aligning the arrows or indicators.
- Place the desired sieve (juice or sorbet) into the sieve frame.
- Insert the auger into the center of the sieve.
- Attach the juicing chamber assembly onto the motor base, ensuring it locks securely into place.
- Place the juice container under the juice outlet and the pulp container under the pulp outlet.
Video 4.1: Official product video demonstrating the assembly, operation, and features of the CASO SJW 500 Slow Juicer.
5. Arahan Operasi
Follow these steps to operate your slow juicer:
- Sediakan Bahan: Wash all fruits, vegetables, or herbs thoroughly. For ingredients larger than the 75mm chute, cut them into smaller pieces. Remove hard pits from fruits (e.g., peaches, plums) and tough skins (e.g., pineapple, citrus).
- Hidupkan kuasa: Plug the juicer into a suitable power outlet. Turn the control switch to the 'ON' position.
- Bahan Makanan: Slowly feed the prepared ingredients into the feeding chute. Use the food pusher to gently guide them down. Do not force ingredients, as this can strain the motor.
- Proses Jus: The auger will slowly crush and press the ingredients, separating the juice from the pulp. Fresh juice will flow into the juice container, and pulp will be expelled into the pulp container.
- Drip-Stop Function: The juice outlet features a drip-stop. Close it to prevent drips between juicing sessions or when changing juice containers. Open it to allow juice to flow.
- Fungsi terbalik: If ingredients become jammed, switch the control to 'REV' (Reverse) for a few seconds to clear the blockage, then switch back to 'ON'.
- Selesai Juicing: Once all ingredients are juiced, turn the control switch to 'OFF' and unplug the appliance.
Image 5.1: Placing an apple into the feeding chute.
Image 5.2: The juicer in operation, producing fresh juice.
6. Penyelenggaraan dan Pembersihan
Regular cleaning ensures optimal performance and extends the lifespan of your juicer. Always unplug the appliance before cleaning.
- Pembongkaran: Disassemble the juicer in reverse order of assembly.
- Bahagian Bilas: Rinse all removable parts (juicing chamber, auger, sieve, sieve frame, juice/pulp containers, food pusher) under running water immediately after use to prevent pulp from drying and sticking.
- Clean Sieve: Use the provided cleaning brush to thoroughly clean the sieve. The fine mesh can trap small fibers, so careful brushing is essential.
- Wash with Soap: Basuh semua bahagian yang boleh ditanggalkan dengan air suam dan sabun.
- Bilas dan Keringkan: Bilas semua bahagian dengan teliti dan biarkan ia kering sepenuhnya sebelum memasang semula atau menyimpan.
- Pangkalan Motor Bersih: Lap tapak motor dengan iklanamp kain. Jangan sekali-kali merendam tapak motor di dalam air.
7. Penyelesaian masalah
Jika anda menghadapi masalah dengan pemerah jus anda, rujuk kepada masalah dan penyelesaian biasa berikut:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Juicer tidak dihidupkan. | Not plugged in; power switch off; parts not assembled correctly. | Check power connection; ensure switch is 'ON'; reassemble all parts securely. |
| Motor stops during operation or jams. | Too much ingredient fed at once; hard ingredients causing blockage. | Switch to 'REV' for a few seconds, then back to 'ON'. Reduce amount of ingredients. Cut hard ingredients into smaller pieces. |
| Hasil jus yang rendah atau pulpa basah. | Sieve is clogged; ingredients are too soft or overripe. | Clean the sieve thoroughly. Alternate soft and hard ingredients. |
| Getaran atau bunyi yang berlebihan. | Bahagian tidak dipasang dengan betul; permukaan tidak rata. | Disassemble and reassemble all parts, ensuring they are locked in place. Place juicer on a flat, stable surface. |
Jika masalah berterusan selepas mencuba penyelesaian ini, sila hubungi sokongan pelanggan.
8. Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | Reka bentuk CASO |
| Model | SJW 500 (3506) |
| warna | Hitam, Keluli Tahan Karat |
| Dimensi (L x W x H) | 20.5 x 20 x 44 cm |
| Berat badan | 6.34 kg |
| kuasa | 150 W |
| Voltage | 230 V |
| bahan | Keluli Tahan Karat, Plastik |
| Filling Opening Diameter | 75 mm |
| Kelajuan Putaran | 50-60 RPM |
| Ciri Khas | Slow Juice Technology, Juice & Sorbet Sieve, Drip-Stop, Reverse Function |
9. Waranti dan Sokongan
Your CASO SJW 500 Design Slow Juicer comes with a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including the warranty period and coverage details.
For technical support, spare parts, or warranty claims, please contact CASO Design customer service. Contact information can typically be found on the manufacturer's webtapak atau dalam pembungkusan produk.
Sila simpan bukti pembelian anda untuk sebarang pertanyaan berkaitan waranti.