Scout Rectangular Blue Digital Alarm Clock Model 280001026 User Manual

pengenalan

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Scout Rectangular Blue Digital Alarm Clock, Model 280001026. Please read this manual carefully before using the device to ensure proper function and longevity.

The Scout alarm clock features a unique design where rotating the clock activates or deactivates the alarm. It includes a precise alarm time adjustment, a light button for night illumination, and a snooze function. A twilight switch allows for continuous display illumination at night.

Kandungan Pakej

• Scout Rectangular Blue Digital Alarm Clock
• Manual Pengguna (dokumen ini)

Nota: Bateri tidak disertakan dan mesti dibeli secara berasingan.

Persediaan

1. Pemasangan Bateri

1. Cari petak bateri di bahagian belakang jam loceng.
2. Buka penutup petak bateri.
3. Insert the required batteries (e.g., 2x AA, check specifications) according to the polarity indicators (+/-).
4. Tutup penutup petak bateri dengan selamat.

2. Menetapkan Masa

1. On the back of the alarm clock, locate the time setting controls (usually a dial or buttons).
2. Adjust the time to the current hour and minute.

3. Menetapkan Masa Penggera

1. Locate the alarm setting controls on the back of the alarm clock.
2. Adjust the alarm time to your desired wake-up time.

Arahan Operasi

Mengaktifkan dan Menyahaktifkan Penggera

The Scout alarm clock features a unique rotation mechanism to control the alarm function.

Image: This composite image illustrates how to activate and deactivate the alarm. When the side marked "AN" (ON) is facing up, the alarm is active. When the side marked "AUS" (OFF) is facing up, the alarm is deactivated. The middle section shows the clock being rotated to switch between these states.

• Kepada activate the alarm, rotate the alarm clock so that the side marked "AN" (ON) is facing upwards. The display will show the current time and the set alarm time.
• Kepada deactivate the alarm, rotate the alarm clock so that the side marked "AUS" (OFF) is facing upwards. The alarm icon will disappear from the display.

Fungsi Tunda

Apabila penggera berbunyi, tekan MENGEJUTKAN button (located on the top of the clock) to temporarily silence the alarm. The alarm will sound again after a short interval (typically 5-10 minutes).

Display Illumination (Light Button)

Tekan ke KEJAYAAN (LIGHT) button (located on the top of the clock) to illuminate the display for a few seconds, allowing you to view the time in the dark.

Permanent Night Illumination (Twilight Switch)

On the back of the alarm clock, locate the twilight switch. This switch allows you to enable or disable permanent display illumination during nighttime hours. When enabled, the display will automatically light up dimly in low-light conditions.

Penyelenggaraan

• Bersihkan jam loceng dengan kain lembut dan kering. Jangan gunakan pembersih atau pelarut yang kasar.
• Avoid exposing the alarm clock to extreme temperatures, direct sunlight, or high humidity.
• If the display becomes dim or the alarm function is inconsistent, replace the batteries.
• Do not attempt to disassemble the alarm clock, as this may void the warranty and cause damage.

Menyelesaikan masalah

Spesifikasi

Waranti dan Sokongan

For warranty information or technical support, please refer to the official Scout webtapak atau hubungi peruncit anda. Simpan resit pembelian anda sebagai bukti pembelian.

Untuk bantuan lanjut, anda boleh melawati Scout brand page on Amazon.