Intex Type B Pool Filter Cartridge Instruction Manual

pengenalan

This manual provides essential information for the proper use and maintenance of your Intex Type B Easy Set Swimming Pool Pleated Replacement Filter Pump Cartridges. These cartridges are designed to ensure clean and clear water for your swimming pool by effectively filtering out debris.

Image: An 8-pack of Intex Type B filter cartridges, ready for use.

Ciri-ciri Utama:

• Penapisan Kuat: Features 63 pleats designed to trap sand particles, leaves, hair, sediment, and sunscreen, ensuring sparkling blue water.
• Tahan Lama & Boleh Digunakan Semula: Constructed with 13.5 square feet of Dacron filament media for long-lasting durability and reusability after cleaning.
• Prestasi Optimum: Designed to maintain peak pump performance when replaced regularly.
• Sesuai Sempurna: Compatible with Intex 633T, 634T, 634RC, CS8111, and CS8221/CS8231 filter pumps.

Persediaan

Before installing the filter cartridge, ensure your pool pump system is turned off and disconnected from power. Refer to your specific Intex filter pump owner's manual for detailed safety instructions and pump-specific setup procedures.

1. Sediakan Pam: Locate the filter housing on your Intex pump. Depending on your model, you may need to unscrew a retaining ring or open a latch to access the cartridge compartment.
2. Tanggalkan Kartrij Lama (jika berkenaan): If replacing an old cartridge, carefully remove it and dispose of it properly.
3. Masukkan Kartrij Baharu: Place the new Intex Type B filter cartridge into the filter housing. Ensure it sits securely and correctly within the compartment.
4. Selamatkan Perumahan: Close and secure the filter housing. Tighten any retaining rings or latches firmly to prevent leaks.
5. Release Air: Before starting the pump, open the air release valve(s) on the pump system. This allows air to escape as water fills the filter housing, preventing airlocks. Close the valves once a steady stream of water emerges.
6. Sambungkan Kuasa: Once the cartridge is installed and the housing is sealed, reconnect your pump to the power supply.

Image: Packaging indicating compatibility with Intex pump models 633T, 634T, CS8111, CS8221/CS8231.

Operating the Filter System

The Intex Type B filter cartridge works in conjunction with your Intex filter pump to circulate and clean your pool water. Once installed, the pump draws water through the cartridge, where impurities are trapped by the pleated Dacron media, and then returns clean water to the pool.

• Ensure the pump is running for an adequate amount of time daily to maintain water clarity, typically 8-12 hours depending on pool size and usage.
• Monitor the water flow from your pump's return jet. A reduced flow may indicate a dirty filter cartridge.

Image: Illustration of superior cleaning performance, showing clear pool water.

Penyelenggaraan

Regular maintenance of your Intex Type B filter cartridge is crucial for optimal pool water quality and pump longevity.

1. Pembersihan tetap: For extended life and efficiency, hose down the fabric of the filter cartridge regularly to remove trapped debris. This can be done every few days, depending on pool usage and debris levels.
2. Jadual Penggantian: Replace each filter cartridge every 2 minggu for peak pump performance and consistent water clarity. While cleaning extends life, regular replacement ensures the best filtration.
3. Storan: If storing the pump and filter for an extended period, ensure the cartridge is thoroughly cleaned and dried before storage to prevent mold or mildew growth.

Imej: Dari dekat view of the pleated filter media, highlighting its design for trapping impurities.

Image: An icon symbolizing easy maintenance, emphasizing the recommended 2-week replacement cycle for maximum efficiency.

Menyelesaikan masalah

If you experience issues with your pool's filtration, consider the following common troubleshooting steps related to the filter cartridge:

For more complex issues, consult your Intex filter pump's owner's manual or contact Intex customer support.

Spesifikasi

• Nombor Model: 29005E
• Jenis Penapis: Type B Pleated Replacement Cartridge
• Dimensi: Approximately 10 inches (height) x 5.75 inches (diameter) with a 1.93-inch center core.
• Penapis Media: Dacron filament media
• Pleat Count: 63 pleats
• Pam Serasi: Intex 633T, 634T, 634RC, CS8111, CS8221/CS8231 series filter pumps.
• Weight (8-pack): 8.68 paun

Image: Detailed dimensions of the Intex Type B filter cartridge.

Waranti dan Sokongan

Maklumat Waranti:

Specific warranty details for Intex filter cartridges are typically provided with the product packaging or can be found on the official Intex webtapak. Sila simpan bukti pembelian anda untuk sebarang tuntutan waranti.

Sokongan Pelanggan:

For further assistance, technical support, or to purchase additional products, please visit the official Intex webtapak atau hubungi bahagian perkhidmatan pelanggan mereka.

Official Intex Store: Kedai Intex di Amazon