iGear iG-1060

iGear iLumi Gesture Sensor Lamp Manual Pengguna

Model: iG-1060

pengenalan

The iGear iLumi Gesture Sensor Lamp (Model iG-1060) is a rechargeable, multi-color LED lamp designed for indoor use. It features intuitive gesture control for power, brightness adjustment, and color mode selection. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your iLumi lamp.

1. Persediaan

1.1 Membuka kotak

Carefully remove the iGear iLumi lamp from its packaging. Ensure all components are present. The package typically includes:

  • 1 x iGear iLumi Light Fixture
  • 1 x Kabel Pengecas USB
  • 1 x Manual Pengguna (dokumen ini)

1.2 Charging the Lamp

Before initial use, fully charge the iLumi lamp.

  1. Locate the USB charging port on the side of the lamp.
  2. Sambungkan kabel pengecas USB yang disediakan ke lamp and to a compatible USB power source (e.g., computer, USB wall adapter).
  3. Lampu penunjuk pengecasan (jika ada) akan menyala semasa pengecasan dan padam atau bertukar warna apabila dicas sepenuhnya.
  4. A full charge provides approximately 12 hours of usage and up to 350 hours of standby time.
iGear iLumi lamp showing 1200 mAh rechargeable battery and 12 hours usage

Image: The iGear iLumi lamp highlighting its 1200 mAh rechargeable battery and up to 12 hours of operation.

1.3 Penempatan

Place the iLumi lamp on a stable, flat surface indoors. Ensure it is away from direct water sources and prolonged direct sunlight to prevent damage.

2. Arahan Operasi

The iGear iLumi lamp utilizes gesture control for its functions.

2.1 Hidupkan/Mati Kuasa

Untuk menghidupkan lamp on or off, simply wave your hand over the top sensor area of the lamp.

Hand waving over the iGear iLumi lamp to control it

Image: A hand demonstrating the gesture control feature over the iLumi lamp.

2.2 Melaraskan Kecerahan

To adjust the brightness of the light, hold your hand steadily over the sensor area. The brightness will gradually increase or decrease. Remove your hand when the desired brightness level is reached.

Hand hovering over iGear iLumi lamp untuk melaraskan kecerahan

Image: A hand hovering above the iLumi lamp, illustrating the brightness control function.

2.3 Changing Light Modes and Colors

The iLumi lamp offers two main light modes: warm white and multi-color.

  • Mod Putih Hangat: This is the default mode for general illumination.
  • Multi-Color Mode: To switch to multi-color mode, wave your hand over the sensor area twice in quick succession. The lamp will cycle through 7 different colors. To stop on a specific color, wave your hand over the sensor once.
iGear iLumi lamp displaying various colors like white, blue, purple, green, yellow, orange, red

Image: Multiple iLumi lamps menunjukkanasing the range of 7 available multi-colored lights.

3. Penyelenggaraan

3.1 Pembersihan

To clean the iLumi lamp, lap permukaannya dengan lembut, kering atau sedikit keringamp cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the lampkemasan atau komponen dalaman.

3.2 Penjagaan Bateri

Untuk memanjangkan hayat bateri, elakkan daripada mencas sepenuhnyaamp frequently. Recharge the lamp when the light output becomes dim. If storing the lamp for an extended period, charge it to approximately 50% every few months.

4. Penyelesaian masalah

MasalahKemungkinan PuncaPenyelesaian
Lamp tidak menyala.Bateri habis.Cas lamp menggunakan kabel USB yang disediakan.
Kawalan gerak isyarat tidak bertindak balas.Sensor obstructed or incorrect gesture.Ensure the sensor area on top of the lamp is clear. Perform gestures smoothly and directly over the sensor.
Lamp does not hold charge.Faulty charging cable or battery degradation.Try a different USB charging cable and power adapter. If the issue persists, contact customer support.
Cahaya berkelip atau tidak konsisten.Bateri lemah atau masalah dalaman.Cas lamp fully. If flickering continues, contact customer support.

5. Spesifikasi

CiriPerincian
Nombor ModeliG-1060
JenamaiGear
Dimensi Produk8.4D x 8.4W x 4.7H Sentimeter
Berat Barang105 Gram
Lamp taipCahaya Malam
Jenis Sumber CahayaLED
Sumber KuasaDikuasakan Bateri (Boleh dicas semula)
Kapasiti Bateri1200 mAh
Masa Penggunaan (Cas Penuh)Sehingga 12 jam
Masa Tunggu SediaSehingga 350 jam
Wattage1.5 Watt
Voltage3.2 Volt
Kaedah KawalanGesture, Touch
Teknologi KetersambunganUSB
Bahan TeduhAkrilonitril Butadiena Stirena
Bahan Asaskayu
warnaputih
Penggunaan Dalaman/LuarDalaman
Negara AsalChina

6. Maklumat Keselamatan

  • Keep away from water sources. This product is not water-resistant.
  • Keep away from direct sunlight to prevent overheating and potential damage to the battery or components.
  • Jangan cuba membuka atau mengubah suai lamp.
  • Use only the provided or a compatible USB charging cable.
  • Jauhkan daripada kanak-kanak.

7. Waranti

For information regarding the product warranty, please refer to the warranty card included with your purchase or contact the retailer/manufacturer directly. Warranty terms and conditions may vary.

8. Sokongan Pelanggan

If you encounter any issues or have questions about your iGear iLumi Gesture Sensor Lamp, please contact the manufacturer:

Pengeluar: Penyelesaian Pemberian Hadiah Korporat
Alamat: 204, Sai Corporate Park, Laxmi Nagar, off. Link road, Goregaon west, Mumbai 400104, India
Nombor bebas tol: 1800 22 8495

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.