1. Produk Lebihview
The FNNEMGE FG608 Car Jump Starter is a portable, high-capacity device designed to start 12V vehicles with dead batteries. It also functions as a power bank for electronic devices and features an integrated LED flashlight. This manual provides essential information for safe and effective use.
Rajah 1: FNNEMGE FG608 Car Jump Starter and included accessories.
Ciri-ciri Utama:
- Output Kuasa Tinggi: 5000A peak current for starting 12V vehicles (up to all gas or 8.0L diesel engines).
- Keserasian Berbilang Kenderaan: Suitable for trucks, motorcycles, watercraft, lawn mowers, snowmobiles, and more.
- Perlindungan Keselamatan Lanjutan: 10 intelligent safety mechanisms including overcharging, short circuit, reverse polarity, power surge, and spark protection.
- Lampu LED Serbaguna: Features Flashlight, Strobe Light, and SOS Light modes for various emergency and outdoor situations.
- Bank Kuasa Mudah Alih: 23800mAh capacity with USB output for charging phones, tablets, and other devices.
- Paparan LCD HD: Provides clear information on battery status, input/output, and temperature alerts.
2. Maklumat Keselamatan
Sila baca semua amaran dan arahan keselamatan sebelum menggunakan produk ini. Kegagalan mematuhi arahan ini boleh mengakibatkan renjatan elektrik, kebakaran atau kecederaan serius.
- Jauhkan peranti daripada kanak-kanak.
- Jangan dedahkan peranti kepada hujan atau kelembapan yang melampau.
- Jangan buka atau ubah suai peranti.
- Gunakan hanya kabel jumper pintar yang disediakan.
- Ensure proper polarity connection to the vehicle battery (red clamp kepada positif, cl hitamamp kepada negatif).
- Jangan lompat bateri beku.
- Elakkan sentuhan dengan asid bateri.
- Beroperasi di kawasan pengudaraan yang baik.
- If the device becomes excessively hot during use, discontinue operation immediately.
Rajah 2: The jump starter incorporates 10 advanced safety protections for user safety.
3. Apa yang ada di dalam Kotak
Sahkan bahawa semua item terdapat dalam pakej anda:
- 1 x FNNEMGE Portable Jump Starter (FG608)
- 1 x Set Kabel Pelompat Pintar
- 1 x Kabel Pengecasan USB-C
- 1 x Storage Box / Portable Carry Case
- 1 x Manual Pengguna
4. Persediaan dan Pengecasan
Caj Permulaan:
Before first use, fully charge the jump starter. It is recommended to charge the device every 3 months to maintain battery health, even if not in use.
- Connect the provided USB-C charging cable to the jump starter's USB-C input port.
- Sambungkan hujung kabel USB-C yang satu lagi pada penyesuai dinding USB (tidak disertakan) atau port USB berkuasa.
- The LCD screen will display the charging status. Charge until the screen shows 100%.
Rajah 3: The intelligent LCD display shows the battery level and operational status.
5. Arahan Operasi
5.1. Lompat Memulakan Kenderaan
Pastikan jump starter dicas sekurang-kurangnya 50% sebelum cuba memulakan kenderaan dengan jump start.
- Sediakan Kenderaan: Turn off the vehicle's ignition and all accessories (lights, radio, AC).
- Sambungkan Smart Clamps: Insert the blue plug of the smart jumper cables firmly into the jump starter's 12V output port. Ensure a secure connection.
- Sambung ke Bateri:
- Lampirkan merah (+) clamp ke terminal bateri positif kenderaan.
- Lampirkan hitam (-) clamp to the vehicle's negative battery terminal or a solid, unpainted metal part of the engine block (ground point).
cl yang bijakamps will indicate a successful connection (e.g., a green light or specific beep pattern).
- Mulakan Kenderaan: Sebaik sahaja clamps are correctly connected and the indicator is green, start the vehicle's engine.
- Keluarkan Clamps: As soon as the engine starts, remove the smart clamps from the vehicle battery within 30 seconds. First, remove the black (-) clamp, maka cl merah (+)amp.
- Disconnect from Jump Starter: Putuskan sambungan kabel jumper pintar daripada starter jump.
Rajah 4: Proper connection of the jump starter to a 12V car battery.
5.2. Menggunakan sebagai Power Bank
The jump starter can charge various electronic devices via its USB output port.
- Connect your device's USB charging cable to the jump starter's USB output port.
- The jump starter will automatically begin charging your device. The LCD screen may indicate "OUT".
- Putuskan sambungan peranti anda setelah pengecasan selesai.
Rajah 5: The jump starter functions as a portable power bank for various devices.
5.3. Menggunakan Lampu Suluh LED
The integrated LED light has three modes: Flashlight, Strobe, and SOS.
- Tekan dan tahan butang kuasa selama lebih kurang 3 saat untuk menghidupkan lampu suluh.
- Press the power button again to cycle through the modes: Flashlight > Strobe > SOS.
- Tekan dan tahan butang kuasa sekali lagi selama 3 saat untuk mematikan lampu LED.
Rajah 6: The LED flashlight provides illumination for various tasks.
6. Penyelenggaraan dan Penyimpanan
- mengecas: Recharge the jump starter every 3 months to prolong battery life, even if not used.
- Pembersihan: Lap peranti dengan kain kering dan lembut. Jangan gunakan bahan kimia yang keras atau bahan yang melelas.
- Storan: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it in its protective carrying case when not in use.
- Penjagaan Bateri: Do not store the device with a completely depleted battery for extended periods.
7. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Peranti tidak dihidupkan. | Bateri habis. | Caskan penghidup lompat sepenuhnya. |
| Kenderaan tidak bermula. | cl yang salahamp sambungan; Bateri penghidup lompat terlalu rendah; Bateri kenderaan rosak teruk. | Periksa clamp polarity and connection. Ensure jump starter is sufficiently charged. Consult a mechanic if vehicle battery is severely damaged. |
| Pintar clamps show error (e.g., red light, continuous beep). | Kekutuban songsang, litar pintas atau pencetus keselamatan yang lain. | Putuskan sambungan clamps immediately. Recheck connections for correct polarity. Refer to safety indicators on the smart clamps. |
| Peranti tidak mengecas peranti luaran. | Jump starter battery too low; Incorrect cable; Device not compatible. | Charge the jump starter. Use the correct USB cable for your device. Ensure your device is compatible with USB charging. |
8. Spesifikasi
| Ciri | Perincian |
|---|---|
| Model | FG608 |
| Arus Puncak | 5000A |
| Kapasiti Bateri | 23800mAh |
| Mula Voltage | 12V |
| Keserasian Enjin | Up to All Gas, 8.0L Diesel Engines |
| Output USB | Yes (for charging devices) |
| Input USB-C | Yes (for charging the jump starter) |
| Mod Lampu LED | Lampu suluh, Strob, SOS |
| Suhu Operasi | -20°F hingga 70°F (-29°C hingga 21°C) |
| Dimensi | 14 x 24.99 x 9.98 cm |
| Berat badan | 450 g |
| Jenis Bateri | Polimer Litium |
9. Waranti dan Sokongan
The FNNEMGE FG608 Car Jump Starter comes with a WARANTI 2 TAHUN dari tarikh pembelian.
FNNEMGE offers Lifetime Technical Support and Customer Service.
For any questions or assistance during use, please refer to the contact information provided in the user manual included in your product packaging or visit the official FNNEMGE webtapak.