MAX MXSA001 315MHz TPMS Tire Pressure Sensors for Toyota Instruction Manual

1. Pengenalan

This instruction manual provides essential information for the proper installation, operation, and maintenance of your MAX MXSA001 315MHz Tire Pressure Monitoring System (TPMS) sensors. These sensors are designed as direct replacements for various Toyota models, ensuring accurate tire pressure monitoring for enhanced safety and vehicle performance. Please read this manual thoroughly before installation and retain it for future reference.

2. Maklumat Keselamatan

Pemasangan Profesional Disyorkan: Installation of TPMS sensors requires specialized tools and knowledge. It is highly recommended that these sensors be installed by a qualified technician.
Correct Torque: Ensure valve stem nuts are tightened to the specified torque (4 Nm or 35 in-lbs) to prevent air leaks and sensor damage.
Pemasangan Tayar: Exercise caution during tire mounting and demounting to avoid damaging the sensor.
Keserasian: Verify that the sensors are compatible with your vehicle's make, model, and year before installation. Refer to the replacement OEM part numbers provided.
Hayat Bateri: TPMS sensors contain non-replaceable batteries. The typical lifespan is 5-7 years, depending on usage.

3. Kandungan Pakej

Setiap pakej mengandungi:

4 x MAX MXSA001 315MHz TPMS Sensors
4 x Silver Aluminum Valve Stems (pre-attached to sensors)

Four MAX MXSA001 TPMS sensors with silver aluminum valve stems, arranged on a white background.

Gambar 3.1: Lebihview of four MAX MXSA001 TPMS sensors.

4. Persediaan dan Pemasangan

Proper installation is crucial for the correct functioning of the TPMS. It is strongly recommended that installation be performed by a certified automotive technician.

4.1 Semakan Pra-Pemasangan

Confirm that the MXSA001 sensors are the correct replacement for your vehicle's OEM part numbers (e.g., 4260733021, 4260706011, 4260733011, 426070C020, 426070C010, 42607AD020, 4260704010).
Inspect each sensor for any visible damage before installation.

4.2 Pemasangan Sensor

Keluarkan tayar dari roda.
Carefully remove the old TPMS sensor and valve stem.
Insert the new MAX MXSA001 sensor's valve stem through the valve hole from the inside of the rim.
Secure the valve stem nut from the outside, tightening it to 4 Nm (35 in-lbs). Jangan terlalu ketat.
Ensure the sensor body is properly seated and does not interfere with the tire bead during mounting.
Mount the tire back onto the wheel, taking care not to damage the sensor.
Tiup tayar ke tekanan yang disyorkan pengeluar.

jarak dekat view of a single MAX MXSA001 TPMS sensor, showing the black sensor body, silver valve stem, and printed specifications like 'Max.9Bar/130Psi' and '4Nm'.

Figure 4.2.1: Close-up of a single MXSA001 sensor.

sebelah view of a MAX MXSA001 TPMS sensor, highlighting the angle of the valve stem attachment to the sensor body.

Rajah 4.2.2: Sisi view of the sensor and valve stem.

4.3 Prosedur Pembelajaran Semula TPMS

After installing new TPMS sensors, your vehicle's TPMS control module must be reprogrammed or

Dokumen Berkaitan - MXSA001

	Panduan Pemasangan & Maklumat Waranti MAX Sensor TPMS (GEN 5) Arahan terperinci untuk memasang penderia MAX Sensor TPMS (model MX005A GEN 5, MX005R GEN 5), termasuk butiran pengaturcaraan, pemasangan, inflasi dan jaminan. mematuhi FCC.
	MAX SENSOR MX-51 TPMS Diagnostic Tool User Manual and Overview Comprehensive guide to the MAX SENSOR MX-51, a TPMS diagnostic tool for testing, programming, and relearning tire pressure monitoring systems. Includes setup, operation, and troubleshooting.
	MAX Sensor MXBLE02 TPMS Sensor Installation and Warranty Guide Comprehensive guide for installing the MAX Sensor MXBLE02 TPMS sensor, including important safety precautions, warranty information, and FCC compliance details.
	MAX Sensor TPMS Installation and Warranty Guide This guide provides instructions for installing MAX Sensor TPMS units (models MX005A, MX005R GEN 5A), covering component identification, step-by-step installation, warranty details, and FCC compliance information.
	Manual Pengguna Penyuntik Automatik - Sokongan Teknikal dan Maklumat Waranti YZHIDIANF Manual pengguna rasmi untuk Penyuntik Auto YZHIDIANF, yang memberikan butiran tentang perkhidmatan sokongan teknikal, maklumat jaminan dan butiran perhubungan. Termasuk faedah seperti jaminan 2 tahun, penggantian percuma dan pelan kebajikan.
	TST 507 Series Wireless TPMS Installation Manual Installation guide for the TST 507 Series Wireless Tire Pressure and Temperature Monitoring System (TPMS). Covers setup, sensor programming, display configuration, alerts, troubleshooting, and specifications for vehicles and trailers.

Max Sensor MXSA001