pengenalan
Thank you for choosing the MOUNTUP MU0008 Tilting TV Wall Mount. This manual provides detailed instructions for safe and proper installation, operation, and maintenance of your TV wall mount. Please read all instructions carefully before beginning installation to ensure a secure and optimal viewing experience. If you have any questions or require assistance, please contact our customer support.
Maklumat Keselamatan
AMARAN: Failure to read and follow these instructions may result in personal injury, property damage, or voiding your warranty. This product is designed for installation by qualified personnel only. If you do not understand these instructions or have doubts about the safety of the installation, please consult a qualified installer.
- Do not install this product on drywall alone. It must be mounted to wood studs, solid concrete, or brick walls.
- Ensure the mounting surface can safely support the combined weight of the mount and your television.
- Jangan melebihi kapasiti berat maksimum 132 lbs (60 kg).
- Gunakan hanya perkakasan yang disediakan atau ditentukan oleh MOUNTUP.
- Always check for electrical wires, water pipes, and gas lines in the wall before drilling.
- Jauhkan kanak-kanak dan haiwan peliharaan semasa pemasangan.
- Periksa secara berkala bahawa pemasangannya kukuh dan semua pengikatnya ketat.
Produk Selesaiview
The MOUNTUP MU0008 is a tilting TV wall mount designed for flat screen and curved TVs ranging from 37 to 82 inches. It offers a low-profile design, sitting just 1.5 inches from the wall, while providing a 0° to -10° downward tilt for glare reduction and optimal viewsudut-sudut.
Ciri-ciri Utama
- Keserasian Universal: Supports most 37-82 inch flat or curved TVs up to 132 lbs (60 kg).
- Pematuhan VESA: Fits VESA mounting patterns from 100x100mm to 600x400mm.
- Reka Bentuk Penjimatan Ruang: Mounts TV just 1.5 inches from the wall for a sleek appearance.
- Kecondongan boleh laras: Allows downward tilt of 0° to -10° to reduce glare and improve viewing.
- Pembinaan Teguh: Made from solid steel for strong and stable support.
- Pemasangan Mudah: Features a two-piece frame assembly and a locking system for quick setup.
- Wide Stud Spacing: Designed for wood studs up to 24 inches apart.
Spesifikasi
| Nombor Model | MU0008 |
| Keserasian Saiz Skrin | 37 - 82 inci |
| Kapasiti Berat | 132 paun (60 kg) |
| Keserasian VESA | 100x100mm, 200x200mm, 200x300mm, 300x200mm, 300x300mm, 400x300mm, 400x200mm, 400x400mm, 600x400mm |
| Jenis Pemasangan | Lekap di dinding |
| Jenis Pergerakan | Tilt (0° to -10° downward) |
| Profile from Wall | 1.5 inci |
| bahan | logam |
| warna | Hitam |
| Keserasian Jenis Dinding | Wood studs (up to 24"), Solid concrete, Brick (anchors required for concrete/brick). Not for drywall alone. |
Kandungan Pakej
Please verify that all components are present and undamaged before installation. If any parts are missing or damaged, please contact MOUNTUP customer service.
- Pemasangan Plat Dinding
- Pendakap TV (2x)
- Hardware Kit (various screws, spacers, washers, concrete anchors)
- Manual Arahan
Note: M8x45mm TV screws are not included in the standard package but can be provided upon request if needed for your TV model.
Arahan Pemasangan
Follow these steps carefully for a safe and secure installation.
Pemeriksaan Pra-Pemasangan
- Semak Corak VESA TV: Ensure your TV's VESA pattern (mounting holes on the back) falls within 100x100mm to 600x400mm.
- Check TV Weight: Confirm your TV weighs no more than 132 lbs (60 kg).
- Kenal pasti Jenis Dinding: Determine if your wall is wood stud, solid concrete, or brick. This mount is not for drywall alone.
Pemasangan Langkah demi Langkah
1. Pasangkan Pendakap TV pada TV
Carefully place your TV face down on a soft, clean surface. Attach the two vertical TV brackets to the back of your TV using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are centered and securely fastened. The hooks on the brackets should face upwards.
Image: TV with vertical mounting brackets attached.
2. Assemble and Position Wall Plate
The wall plate comes in two pieces for easier handling and wider stud compatibility. Assemble the two pieces using the provided screws. Determine the desired height and horizontal position for your TV. Use a stud finder to locate wood studs if applicable. Mark the drilling locations on the wall.
Image: Two-piece frame assembly for the wall plate.
Image: Wall plate dimensions and stud compatibility for easy TV centering.
3. Attach Wall Plate to Wall
Drill pilot holes at the marked locations. For wood stud installation, use the lag bolts directly. For concrete or brick walls, insert the concrete anchors into the pilot holes before securing the lag bolts. Ensure the wall plate is level before tightening all bolts securely.
Video: Official MOUNTUP MU0008 TV Wall Mount Installation Video. This video demonstrates the step-by-step process of attaching the wall plate to the wall, including considerations for different wall types.
Image: Compatible wall types for installation, highlighting the need for anchors in brick and concrete.
4. Gantungkan TV pada Plat Dinding
With assistance, carefully lift the TV and hook the TV brackets onto the top edge of the wall plate. Gently lower the TV until the brackets are fully seated on the wall plate. Ensure the TV is centered and stable.
Image: Easy installation process, showing the TV being mounted onto the wall plate.
5. Secure TV to Wall Plate
Locate the safety locking pull straps at the bottom of the TV brackets. Pull these straps downwards to engage the locking mechanism, securing the TV to the wall plate. This prevents accidental dislodgement.
Image: Handy locking system for easy and secure attachment.
Image: Anti-drop edges design to prevent the TV from sliding off.
Operasi
Melaraskan Sudut Kecondongan
The MOUNTUP MU0008 allows for a downward tilt adjustment of 0° to -10°. To adjust the tilt, loosen the tilt adjustment knobs located on the side of the TV brackets. Tilt the TV to your desired angle, then tighten the knobs to secure the position. This feature helps reduce glare from windows or lights.
Image: Anti-glare design with 0° to -10° tilt capability.
Image: Demonstrating how tilting the TV reduces glare.
