pengenalan
The Klein Tools 935DAG Digital Electronic Level and Angle Gauge is a versatile tool designed for precise angle measurement. It can be used to measure or set angles, check relative angles, or function as a digital level. Its strong magnetic base allows for attachment to ferromagnetic surfaces, and the dual measurement ranges (0-90 degrees and 0-180 degrees) accommodate various applications. The high-visibility reverse contrast display ensures easy reading in diverse lighting conditions.
Figure 1: Klein Tools 935DAG Digital Electronic Level and Angle Gauge.
Ciri-ciri
- Fungsi Serbaguna: Measures and sets angles, checks relative angles, and operates as a digital level.
- High Visibility Display: Reverse contrast display for improved readability in low-light conditions.
- Paparan Auto-Putar: Screen automatically rotates when the unit is upside down for convenient viewing.
- Pangkalan Magnetik yang Kuat: Securely attaches to ferromagnetic surfaces such as conduit, pipes, and saw blades for hands-free operation.
- V-Groove Edges: Designed for optimal alignment on conduits and pipes.
- Julat Pengukuran Luas: Capable of measuring angles between 0-90 degrees and 0-180 degrees.
- Water and Dust Resistant: IP42 rating provides protection against water and dust.
- Reka Bentuk Mudah Alih: Compact size with included soft carrying case for easy transport.
Persediaan
Pemasangan Bateri
The Klein Tools 935DAG requires two AAA batteries (included). To install or replace batteries:
- Cari penutup petak bateri di bahagian belakang unit.
- Gunakan pemutar skru kecil untuk melonggarkan skru pada penutup bateri.
- Remove the cover and insert two AAA batteries, ensuring correct polarity (+/-).
- Pasang semula penutup bateri dan ketatkan skru.
Hidupkan/Mati Kuasa
Press the red power button (labeled with a circle and vertical line) to turn the unit ON or OFF.
Figure 2: Included accessories: soft carrying case and AAA batteries.
Arahan Operasi
Basic Angle Measurement
To measure an absolute angle:
- Place the gauge on a flat, level surface.
- Press the 'ZERO' button to calibrate the unit to 0.0 degrees.
- Place the gauge on the surface or object you wish to measure. The display will show the angle relative to the calibrated zero.
Figure 3: Calibrating the gauge to 0.0 degrees on a flat surface.
Relative Angle Measurement
To measure the angle between two surfaces:
- Place the gauge on the first surface.
- Press the 'ZERO' button. The display will show 0.0 degrees, establishing this as your reference angle.
- Move the gauge to the second surface. The display will now show the angle difference between the first and second surfaces.
Figure 4: Measuring a relative angle on a wooden beam.
Fungsi Tahan
Press the 'HOLD' button to freeze the current measurement on the display. This is useful when measuring in hard-to-see areas. Press 'HOLD' again to release the measurement.
Figure 5: Display showing the 'HOLD' function active.
Paparan Berputar Automatik
The display automatically rotates 180 degrees when the unit is inverted, ensuring the reading is always upright and easy to view, regardless of the gauge's orientation.
Figure 6: The auto-rotating display for easy viewing.
Magnetic Base and V-Grooves
The strong magnetic base allows the gauge to adhere to ferromagnetic surfaces, providing hands-free operation. The V-groove edges on all four sides ensure stable placement and optimal alignment on curved surfaces like pipes and conduits.
Figure 7: Utilizing V-groove edges for alignment on conduit.
Figure 8: Gauge magnetically attached to a pipe.
Figure 9: Gauge on a table saw blade for precise angle adjustment.
Penyelenggaraan
Pembersihan
Wipe the unit with a clean, dry cloth. Do not use abrasive cleaners or solvents. Ensure the unit is dry before storage.
Penggantian Bateri
Replace batteries when the low battery indicator appears on the display. Follow the battery installation steps in the Setup section.
Menyelesaikan masalah
| Isu | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Paparan tidak dihidupkan | Bateri mati atau tidak dipasang dengan betul | Gantikan bateri, pastikan polariti yang betul. |
| Bacaan tidak tepat | Unit not calibrated to zero | Recalibrate to 0.0 degrees on a known flat surface. |
| Paparan menunjukkan 'Err' | Internal error or extreme angle | Turn the unit off and on again. Ensure the angle is within the 0-180 degree range. |
Spesifikasi
| Spesifikasi | Perincian |
|---|---|
| Jenama | KLEIN TOOLS |
| Nombor Model | 935DAG |
| bahan | ABS Plastic Housing and Electronic Components |
| warna | Multi (typically orange and black) |
| Dimensi Produk | 2.36" L x 2.2" W |
| Berat Barang | 3.5 Auns |
| Mod Operasi | Automatik |
| Julat Pengukuran | 0-90 Degrees, 0-180 Degrees |
| Ciri Khas | V-grooves Around Entire Perimeter, Reverse Contrast Display, Magnetic Base |
| Bateri | 2 bateri AAA (termasuk) |
| Penarafan IP | IP42 (Tahan Habuk dan Air) |
Waranti dan Sokongan
Maklumat Waranti
This product is covered by a Manufacturer Warranty. Please refer to the warranty documentation included with your purchase for specific terms and conditions.
Sokongan Pelanggan
For technical assistance, troubleshooting, or warranty claims, please contact Klein Tools customer support through their official webtapak atau maklumat hubungan yang diberikan dalam pembungkusan produk anda.
