pengenalan
Thank you for choosing the Pro-Ject Primary E Phono Turntable. This manual provides essential information for the proper setup, operation, and maintenance of your new turntable. Please read this manual thoroughly before using the device to ensure optimal performance and longevity.
The Primary E Phono is designed to deliver high-fidelity audio playback from your vinyl records, featuring a built-in phono stage, an 8.6-inch aluminum tonearm, and a pre-mounted Ortofon OM NN cartridge, all housed in a matte black finish.
Arahan Keselamatan Penting
- Baca arahan ini. Simpan arahan ini. Patuhi semua amaran. Ikut semua arahan.
- Jangan gunakan alat ini berhampiran air.
- Bersihkan hanya dengan kain kering.
- Jangan sekat sebarang bukaan pengudaraan. Pasang mengikut arahan pengilang.
- Jangan pasang berhampiran mana-mana sumber haba seperti radiator, daftar haba, dapur, atau radas lain (termasuk amppenghidup) yang menghasilkan haba.
- Lindungi kord kuasa daripada berjalan atau tersepit, terutamanya pada palam, bekas kemudahan dan tempat keluar dari radas.
- Hanya gunakan lampiran/aksesori yang ditentukan oleh pengilang.
- Cabut plag radas ini semasa ribut petir atau apabila tidak digunakan untuk jangka masa yang lama.
- Rujuk semua servis kepada kakitangan perkhidmatan yang berkelayakan. Servis diperlukan apabila radas telah rosak dalam apa jua cara, seperti kord bekalan kuasa atau palam rosak, cecair telah tertumpah atau objek jatuh ke dalam radas, radas telah terdedah kepada hujan atau lembapan, tidak beroperasi seperti biasa. , atau telah digugurkan.
Apa yang ada dalam Kotak
Upon unpacking, please ensure all the following components are present and in good condition:
- Pro-Ject Primary E Phono Turntable Unit
- Penutup Habuk
- Platter
- Tali Pusing
- Premounted Ortofon OM NN Cartridge
- Bekalan Kuasa
- Kabel Audio RCA
Image: The Pro-Ject Primary E Phono Turntable, showcasing its matte black finish, platter, and tonearm assembly, without the dust cover attached.
Persediaan
1. penempatan
Place the turntable on a stable, level surface, away from direct sunlight, heat sources, and strong vibrations. Ensure there is enough space around the unit for ventilation and operation of the dust cover.
2. Pemasangan Pinggan dan Tali Pinggang
- Carefully place the platter onto the spindle.
- Cari tali sawat pemacu. Regangkan tali sawat dengan lembut di sekeliling tepi dalam platter dan kemudian di sekeliling takal motor. Pastikan tali sawat tidak berpintal.
Imej: Dari dekat view of the turntable's motor pulley and the drive belt correctly installed around it, connecting to the platter.
3. Tonearm dan Cartridge
The Ortofon OM NN cartridge is pre-mounted and aligned at the factory. No further adjustment is typically required for initial setup. Ensure the stylus guard is removed before playing a record.
Image: A detailed shot of the tonearm base, showing the pivot point and cueing lever mechanism.
Image: A close-up of the Ortofon OM NN cartridge with its stylus resting on the grooves of a vinyl record.
4. Sambungan Audio
The Primary E Phono features a built-in phono preamplifier, allowing you to connect it directly to a line-level input on your amplifier or active speakers. It also has a switch to bypass the internal phono stage if you prefer to use an external one.
- Connect the supplied RCA audio cable from the turntable's output jacks to an available input on your amplifier (e.g., "AUX", "CD", "Line In").
- Ensure the "PHONO OUT / LINE OUT" switch on the rear of the turntable is set correctly:
- Tetapkan kepada LINE KELUAR if connecting to a standard line-level input (using the internal phono stagdan).
- Tetapkan kepada PHONO KELUAR if connecting to an amplifier with a dedicated phono input (bypassing the internal phono stagdan).
Image: The rear panel of the turntable showing the RCA output jacks and the switch for selecting between PHONO OUT and LINE OUT.
5. Sambungan Kuasa
Connect the power supply cable to the DC input on the turntable and then plug the power adapter into a suitable wall outlet.
6. Penutup Habuk
Attach the dust cover to the hinges at the rear of the turntable. The dust cover protects the turntable from dust and debris when not in use.
Image: The Pro-Ject Primary E Phono Turntable with its clear dust cover in the open position, ready for use.
Arahan Operasi
1. Menghidupkan/Mematikan
The turntable is powered on by plugging it into the mains. There is no separate power switch. To turn off, unplug the power supply.
2. Memainkan Rekod
- Letakkan rekod di atas pinggan.
- Select the correct playback speed (33 or 45 RPM) using the speed selector switch located on the top left of the plinth.
- Angkat lengan atas menggunakan tuil isyarat.
- Carefully position the tonearm over the desired starting groove of the record.
- Gently lower the tonearm using the cueing lever. The stylus will descend onto the record and playback will begin.
3. Menghentikan Main Semula
- Angkat lengan atas menggunakan tuil isyarat.
- Kembalikan tonearm ke kedudukannya yang rehat dan ketatkannya dengan klip tonearm.
- Keluarkan rekod dari platter.
Penyelenggaraan
1. Membersihkan Meja Putar
- Sentiasa cabut plag meja putar dari salur keluar kuasa sebelum membersihkan.
- Use a soft, dry, lint-free cloth to clean the plinth and dust cover. Avoid abrasive cleaners or solvents.
- For the platter, use a slightly damp kain jika perlu, kemudian keringkan dengan teliti.
2. Penjagaan Stylus
- Bersihkan stylus secara berkala menggunakan berus lembut yang direka untuk membersihkan stylus, berus perlahan-lahan dari belakang ke hadapan.
- Elakkan daripada menyentuh stylus dengan jari anda.
- Replace the stylus when signs of wear are apparent (e.g., distorted sound, increased surface noise).
3. Memacu tali pinggang
Periodically inspect the drive belt for any signs of wear, stretching, or cracking. A worn belt can affect playback speed stability. Replace the belt if necessary.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tiada kuasa | Kord kuasa tidak disambungkan; soket tidak aktif. | Semak sambungan kuasa; cuba outlet lain. |
| Tiada suara atau kelantangan rendah | Input yang salah dipilih pada amplifier; PHONO/LINE switch incorrect; loose RCA cables; damaged stylus. | Select correct input; ensure PHONO/LINE switch matches connection; check RCA cables; inspect stylus. |
| Bunyi herot | Dirty or worn stylus; incorrect tracking force (less likely with pre-set); dirty record. | Clean or replace stylus; clean record. |
| Speed fluctuations | Worn or stretched drive belt; motor pulley dirty. | Inspect and replace drive belt if necessary; clean motor pulley. |
Spesifikasi
| Ciri | Perincian |
|---|---|
| Dimensi Produk | 12.99 x 16.54 x 4.41 inci |
| Berat Barang | 8.8 paun (4 Kilogram) |
| Nombor Model Item | Primary E Phono UNI |
| Jenama | Pro-Ject |
| Kelajuan Putaran Maksimum | 45 RPM |
| Komponen yang Disertakan | Dust Cover, Platter, Premounted OM NN Cartridge |
| bahan | Aluminium, Kayu Kejuruteraan |
| warna | Hitam Matte |
| Peranti Serasi | Bersepadu Amp dengan Phono Stage, Phono Preamp |
| Penggunaan kuasa dalam mod | 4.50 watt |
Waranti dan Sokongan
Pro-Ject Audio Systems products are manufactured to the highest standards and undergo strict quality control. For information regarding warranty terms and conditions, please refer to the warranty card included with your product or visit the official Pro-Ject Audio Systems webtapak.
For technical support or service inquiries, please contact your authorized Pro-Ject dealer or distributor. Do not attempt to service the unit yourself.
Anda boleh mendapatkan lebih banyak maklumat dan sumber sokongan di Kedai Pro-Ject di Amazon.