Produk Selesaiview
The Trevi SLD 3P50 is a digital clock thermometer featuring a large, backlit LCD display. It includes a programmable alarm and a snooze function, designed for clear readability and ease of use in various indoor environments.
Imej: Depan view of the Trevi SLD 3P50 Digital Clock Thermometer, displaying the current time, date, day of the week, and indoor temperature.
Kandungan Pakej
- 1 x Trevi SLD 3P50 Digital Clock Thermometer
- 1 x Manual Pengguna (dokumen ini)
- Nota: Bateri tidak disertakan dan mesti dibeli secara berasingan.
Persediaan
1. Pemasangan Bateri
- Cari petak bateri di bahagian belakang peranti.
- Buka penutup petak bateri.
- Insert the required batteries (typically AAA, refer to the compartment label for exact type and polarity). Ensure correct polarity (+/-).
- Tutup penutup petak bateri dengan selamat.
2. Kuasa Awal Hidup
Upon battery installation, the device will power on automatically. The display will show default time and date settings, and the current temperature.
3. Menetapkan Masa dan Tarikh
- Tekan ke MODE button to cycle through display modes until the time setting mode is active (usually indicated by flashing digits).
- Gunakan UP dan TURUN butang untuk melaraskan jam, kemudian tekan MODE untuk mengesahkan dan beralih kepada minit.
- Repeat this process for setting the year, month, and day.
- Tekan MODE sekali lagi untuk keluar dari mod tetapan.
Arahan Operasi
1. Mod Paparan
Tekan ke MODE button to switch between different display modes, such as Time, Date, and Alarm settings.
2. Menetapkan Penggera
- Tekan MODE until the alarm time is displayed (often indicated by an alarm icon).
- Tekan dan tahan MODE sehingga angka loceng waktu berkelip.
- Gunakan UP dan TURUN butang untuk menetapkan jam penggera yang diingini.
- Tekan MODE to confirm and move to minutes, then set minutes.
- Tekan MODE again to save the alarm setting.
- Untuk mengaktifkan/menyahaktifkan penggera, tekan butang ALARM ON / OFF button (or similar, refer to device buttons). An alarm icon will appear/disappear on the display.
3. Using the Snooze Function
Apabila penggera berbunyi, tekan SNOOZE / CAHAYA button (usually located on top) to temporarily silence the alarm. The alarm will sound again after a few minutes (typically 5-10 minutes).
4. Pengaktifan Lampu Latar
Tekan ke SNOOZE / CAHAYA button to activate the display backlight for a few seconds, improving visibility in low-light conditions.
5. Paparan Suhu
The device continuously displays the ambient temperature. Some models may allow switching between Celsius and Fahrenheit. If available, press a dedicated ° C / ° F button or refer to the manual for specific button combinations.
Penyelenggaraan
1. Pembersihan
- Lap peranti dengan kain lembut dan kering.
- Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the surface or internal components.
2. Penggantian Bateri
When the display dims or functions become erratic, it is time to replace the batteries. Follow the battery installation steps in the Persediaan section. Always replace all batteries at the same time with new ones of the same type.
3. Penyimpanan
Jika peranti tidak akan digunakan untuk tempoh yang lama, tanggalkan bateri untuk mengelakkan kebocoran dan potensi kerosakan.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Paparan kosong atau malap. | Bateri rendah atau mati; pemasangan bateri yang salah. | Gantikan bateri dengan yang baharu, memastikan kekutuban yang betul. |
| Penggera tidak berbunyi. | Penggera tidak diaktifkan; kelantangan penggera terlalu rendah (jika boleh dilaraskan). | Ensure the alarm function is turned ON. Check if there's a volume setting. |
| Masa/tarikh yang salah. | Time/date was not set correctly or reset after battery change. | Ikut arahan "Menetapkan Masa dan Tarikh" dalam bahagian Persediaan. |
| Bacaan suhu nampaknya tidak tepat. | Device placed near heat sources, direct sunlight, or drafts. | Relocate the device to a stable indoor environment away from extreme temperature fluctuations. |
Spesifikasi
Image: Trevi SLD 3P50 Digital Clock Thermometer, illustrating its approximate height (11.18 cm) and width (13.46 cm).
| Ciri | Perincian |
|---|---|
| Nombor Model | 0SL3P50 |
| Dimensi (L x W x H) | 50 x 50 x 28 cm |
| Berat badan | 160 gram |
| Jenama | Trevi |
| warna | merah |
| Jenis Paparan | Digital, LCD Bercahaya Belakang |
| Ciri Khas | Temperature display, Large screen, Alarm, Snooze |
| Sumber Kuasa | Dikuasakan bateri |
| Bateri Termasuk | Tidak |
| Jenis Pemasangan | Lekapan meja |
| bahan | Keluli tahan karat |
| Mod Pengendalian | Elektrik |
| Jenis Pergerakan Jam | Kuarza |
Waranti dan Sokongan
This product is covered by a standard manufacturer's warranty. For detailed warranty information, please refer to the warranty card included with your purchase or contact Trevi customer support.
For technical assistance, troubleshooting not covered in this manual, or service inquiries, please visit the official Trevi weblaman web atau hubungi jabatan khidmat pelanggan mereka. Butiran perhubungan biasanya boleh didapati pada pembungkusan produk atau pengilang webtapak.
- Pengeluar: Trevi
- model: SLD 3P50 (0SL3P50)
- ASIN: B07Y3T2BFV