SINGER M1505 White Sewing Machine User Manual

pengenalan

This user manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your SINGER M1505 White Sewing Machine. Please read this manual thoroughly before using the machine to ensure proper setup and to maximize its lifespan and performance.

Rajah 1: Depan view of the SINGER M1505 White Sewing Machine, showcasinreka bentuk padat dan kawalan utamanya.

Persediaan dan Penggunaan Awal

Follow these steps to set up your sewing machine for the first time.

1. Membongkar dan Meletakkan

• Tanggalkan mesin jahit dan semua aksesori dari pembungkusan dengan berhati-hati.
• Place the machine on a stable, flat surface, ensuring adequate space for fabric handling.
• Pastikan suis kuasa berada dalam kedudukan MATI sebelum menyambung kepada kuasa.

Rajah 2: Belakang view of the SINGER M1505, showing the power input and main power switch.

2. Sambungan Kuasa

• Connect the power cord to the machine's power input port (located at the back).
• Palamkan hujung kord kuasa yang satu lagi ke soket elektrik 220V standard.
• Turn the power switch to the ON position. The sewing light should illuminate.

3. Penggulungan Bobbin

• Letakkan gelendong benang pada pin gelendong.
• Ikut laluan penggulungan yang ditunjukkan pada mesin untuk membimbing benang ke penggulung gelendong.
• Letakkan gelendong kosong pada gelendong penggulung gelendong dan tolakkannya ke kanan.
• Press the foot pedal gently to wind the thread onto the bobbin. Stop when the bobbin is full.
• Potong benang dan keluarkan gelendong.

Rajah 3: Sisi view of the SINGER M1505, illustrating the location of the thread spool holder for bobbin winding and upper threading.

4. Memasukkan Bobbin

• Buka plat penutup gelendong yang terletak pada plat jarum.
• Masukkan gelendong lilit ke dalam bekas gelendong, pastikan benang terurai ke arah yang betul (biasanya lawan arah jam).
• Pull the thread through the tension spring and guide it into the slot.
• Tutup plat penutup gelendong.

Rajah 4: Jarak dekat view of the bobbin area with the cover open, showing the bobbin case and thread path.

5. Upper Threading

• Angkat kaki penekan dan jarum ke kedudukan tertinggi.
• Letakkan gelendong benang pada pin gelendong.
• Ikut laluan penguliran bernombor pada mesin, bimbing benang melalui semua cakera tegangan dan panduan.
• Benang jarum dari depan ke belakang.

Rajah 5: Terperinci view of the needle and presser foot area, crucial for proper threading and sewing.

6. Membawa Benang Bobbin

• Hold the upper thread loosely.
• Pusingkan roda tangan ke arah anda untuk menurunkan jarum ke dalam plat jarum dan kemudian angkat semula.
• The upper thread will catch the bobbin thread, forming a loop. Pull this loop up through the needle plate opening.
• Tarik kedua-dua benang (bahagian atas dan gelendong) di bawah kaki penekan dan ke arah belakang mesin.

Arahan Operasi

This section covers the basic operations of your SINGER M1505 sewing machine.

1. Pemilihan Jahitan

• The SINGER M1505 offers various stitch patterns. Use the stitch selector dial on the front of the machine to choose your desired stitch.
• Refer to the stitch chart (usually printed on the machine or in a separate guide) for available stitches and their recommended uses.

Figure 6: Close-up of the stitch selector dial, allowing users to choose from various stitch patterns.

2. Asas Jahitan

• Place the fabric under the presser foot, aligning the edge with the desired seam allowance guide on the needle plate.
• Turunkan tuas kaki penekan.
• Gently press the foot pedal to start sewing. The machine will begin stitching.
• Guide the fabric gently with both hands, but do not push or pull forcefully. Allow the feed dogs to move the fabric.

3. Reverse Stitching

• To secure the beginning and end of a seam, press and hold the reverse lever/button. The machine will sew backward.
• Release the lever/button to resume forward stitching.

4. Removing Fabric

• When you finish sewing, raise the needle to its highest position.
• Naikkan tuas kaki penekan.
• Pull the fabric towards the back of the machine.
• Cut the threads using the thread cutter (if available) or scissors, leaving about 15 cm of thread tails.

Penyelenggaraan

Penyelenggaraan yang kerap memastikan jangka hayat dan prestasi optimum mesin jahit anda.

1. Pembersihan

• Sentiasa cabut plag mesin dari soket kuasa sebelum membersihkannya.
• Regularly remove the needle plate and bobbin case to clean out lint and dust accumulation with a small brush.
• Lap bahagian luar mesin dengan kain lembut dan kering. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.

2. Penggantian Jarum

• Replace the needle frequently, especially after 8-10 hours of sewing or if it becomes bent, dull, or causes skipped stitches.
• Ensure the flat side of the needle faces the back of the machine when inserting. Tighten the needle clamp skru dengan selamat.

Menyelesaikan masalah

Rujuk bahagian ini untuk isu biasa dan penyelesaiannya.

Spesifikasi Produk

Waranti dan Sokongan

Your SINGER M1505 sewing machine is designed for durability and performance.

• Alat ganti untuk model ini tersedia untuk tempoh 2 tahun dari tarikh pembelian.
• For technical support, service, or warranty claims, please contact your authorized Singer dealer or visit the official Singer weblaman web untuk maklumat hubungan di rantau anda.