1. Pengenalan
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Alpine S-A60M Mono Car Audio Amplifier. The S-A60M is a Class-D amplifier designed to deliver reliable power for your car audio subwoofer system. For optimal performance and safety, please read this manual thoroughly before installation and use.
Image 1.1: Alpine S-A60M Mono Car Audio Amplifier with optional RUX-KNOB.2 remote bass control knob and wiring accessories.
2. Maklumat Keselamatan
Sentiasa patuhi langkah berjaga-jaga keselamatan berikut untuk mengelakkan kecederaan atau kerosakan pada amppengalir atau kenderaan:
- Putuskan sambungan terminal bateri negatif kenderaan sebelum memulakan sebarang pemasangan.
- Pastikan pembumian yang betul pada casis kenderaan.
- Gunakan pendawaian tolok yang sesuai untuk sambungan kuasa dan pembumian seperti yang dinyatakan dalam bahagian pemasangan.
- Protect all wiring from sharp edges and pinch points.
- Jangan lekapkan amppenghawa dingin di lokasi yang terdedah kepada cahaya matahari langsung, haba berlebihan, kelembapan atau habuk.
- Pasang dengan selamat amplifier to prevent it from coming loose during sudden stops or impacts.
- Elakkan mengendalikan amplifier at excessively high volume levels for prolonged periods, which can damage hearing or speakers.
- Jika anda tidak pasti tentang mana-mana bahagian proses pemasangan, berunding dengan profesional yang berkelayakan.
3. Persediaan dan Pemasangan
Pemasangan yang betul adalah penting untuk prestasi dan jangka hayat peranti anda amplifier. Follow these steps carefully.
3.1 Pendawaian Bekalan Kuasa
Refer to the diagram below for correct power supply connections. Always use the specified wire gauges and ensure all connections are secure.
Image 3.1: Power Supply Wiring Diagram. This diagram illustrates the correct method for connecting the amplifier to the vehicle's power system, including the battery, fuse, and ground connections. Ensure the fuse capacity matches the ampkeperluan pengawas.
Penting: The total fuse capacity of the amplifier must be installed and the specified wire length. For detailed information, refer to the "Power Supply" section in the owner's manual. Always connect the power wire directly to the positive battery terminal and the ground wire to a clean, unpainted metal surface on the vehicle chassis.
- Battery (BATT): Connect to the positive (+) terminal of the vehicle battery via an appropriate fuse.
- Alat Kawalan Jauh (REM): Sambungkan ke output hidup jauh unit kepala anda.
- Tanah (GND): Connect to a clean, unpainted metal part of the vehicle chassis.
- Speaker Output (SPK OUT): Connect to your subwoofer(s).
Imej 3.2: Amplifier Power and Speaker Output Terminals. This image displays the terminals for power input (BATT, REM, GND) and speaker output (SPK OUT) on the Alpine S-A60M amplifier, along with the integrated fuses.
3.2 Sambungan Input Audio
The S-A60M supports both low-level (RCA) and high-level (speaker wire) inputs.
- Input Aras Rendah (RCA): Sambungkan kabel RCA daripada subwoofer atau pra-out julat penuh unit kepala anda ke amplifier's INPUT (L/R) terminals.
- Input Tahap Tinggi: If your head unit does not have RCA outputs, connect speaker wires from your head unit's speaker outputs directly to the amplifier's high-level input terminals (if available, or use a line output converter).
Imej 3.3: Amplifier Input and Control Panel. This image highlights the various input and control settings on the Alpine S-A60M, including the input level switch, gain control, low-pass filter, bass equalizer, and the port for the optional remote bass control.
4. Mengendalikan Amplebih hidup
Setelah dipasang, laraskan amptetapan pencahayaan untuk prestasi bunyi yang optimum.
4.1 Pelarasan Tahap Input
- Tetapkan TAHAP INPUT switch to "LO" for low-level (RCA) inputs or "HI" for high-level inputs.
- Laraskan DAPATKAN control to match the output of your head unit. Start with the gain at minimum, play a familiar track, and slowly increase the gain until distortion is heard, then back off slightly.
4.2 LP Filter (Low-Pass Filter)
The LP Filter allows only frequencies below the set point to pass through to the subwoofer. This is essential for proper subwoofer integration.
- Laraskan PENAPIS LP knob to set the desired crossover frequency (e.g., 80Hz-120Hz is common for subwoofers).
4.3 Bass EQ
The Bass EQ provides a boost to specific bass frequencies.
- Laraskan EQ BASS knob to increase or decrease bass output. Use sparingly to avoid distortion and speaker damage.
4.4 Remote Bass Control (Optional RUX-KNOB.2)
If you have the optional Alpine RUX-KNOB.2 remote bass control, connect it to the REMOTE BASS CONTROL pelabuhan pada amplifier. This allows for convenient, on-the-fly adjustment of subwoofer output from the driver's seat.
5. Penyelenggaraan
Penyelenggaraan tetap memastikan jangka hayat dan prestasi optimum anda amplebih hidup.
- Pembersihan: Lap secara berkala ampLap bahagian luar penapis dengan kain yang lembut dan kering. Elakkan menggunakan bahan kimia yang keras atau pembersih yang kasar.
- Sambungan: Annually check all power, ground, and speaker connections to ensure they are secure and free from corrosion. Loose connections can lead to poor performance or damage.
- Pengudaraan: Memastikan ampSirip penyejuk lifier bebas daripada halangan bagi membolehkan pelesapan haba yang betul.
6. Penyelesaian masalah
Jika anda mengalami masalah dengan anda amplifier, consult the following table before seeking professional assistance.
| simptom | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tiada kuasa/Tiada bunyi | Blown fuse, loose power/ground connection, remote wire not connected, amppenguat dalam mod perlindungan. | Check fuses (on amplifier and in power line), verify all power and ground connections, ensure remote wire is connected to head unit's remote output, check for overheating or short circuits. |
| Bunyi herot | Gain set too high, improper input level switch setting, damaged speaker, poor signal source. | Reduce gain, ensure INPUT LEVEL switch matches input type (LO/HI), check speaker wiring and condition, test with a different audio source. |
| No bass output | LP Filter set too high/low, Bass EQ set too low, subwoofer wiring issue. | Adjust LP Filter to appropriate frequency, increase Bass EQ if desired (with caution), verify subwoofer connections and impedance. |
| Ampliifier terlalu panas | Insufficient ventilation, improper impedance load, gain set too high. | Pastikan aliran udara yang mencukupi di sekeliling amplifier, verify speaker impedance matches amplifier's capabilities, reduce gain setting. |
7. Spesifikasi
Detailed technical specifications for the Alpine S-A60M amplebih hidup.
- Nombor Model: S-A60M
- CTA-2006-B Power Rating:
- 330W RMS x 1 (4ohm, 14.4V, 1% THD+N)
- 600W RMS x 1 (2ohm, 14.4V, 1% THD+N)
- Nisbah Isyarat-kepada-Bunyi (S/N): >85dB (ref: 1W into 4 ohm), >105dB (ref: rated power into 4 ohm)
- Herotan Harmonik + Bunyi Penuh (THD+N): 0.03% (ref 1W into 4 ohm)
- Respons Kekerapan: 10Hz-400Hz (+/-3 dB)
- DampFaktor: >1000
- Voltage: 14.4 Volt (DC)
- Bekalan Maksimum Voltage: 14.4 Volt (DC)
- Bekalan Minimum Voltage: 14.4 Volt (DC)
- Jenis Pemasangan: Lekapan Permukaan
- Dimensi Pakej: 10.2 x 9.7 x 3.8 inci
- Berat: 6.8 paun
- Remote Bass Knob Compatible: Yes (requires RUX-KNOB.2, sold separately)
8. Waranti dan Sokongan
Alpine products are designed and manufactured to the highest quality standards. For specific warranty information regarding your S-A60M amplifier, please refer to the warranty card included with your product or visit the official Alpine webtapak.
For technical support, service inquiries, or to locate an authorized Alpine dealer, please visit the official Alpine webtapak atau hubungi bahagian perkhidmatan pelanggan mereka. Simpan resit pembelian anda sebagai bukti pembelian untuk tuntutan waranti.
Alpine Electronics of America, Inc.
www.alpine-usa.com