AITRIP AC 110V 10A Automatic Photocell Street Light Switch User Manual

1. Pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of your AITRIP AC 110V 10A Automatic Photocell Street Light Switch. This device is designed to automatically control lighting fixtures based on ambient light levels, turning lights on at dusk and off at dawn, thereby enhancing energy efficiency and convenience.

2. Maklumat Keselamatan

AMARAN: Risiko Renjatan Elektrik.

Always disconnect power at the circuit breaker or fuse box before installing or servicing this device.
Pemasangan hendaklah dilakukan oleh juruelektrik yang berkelayakan atau mengikut kod elektrik tempatan.
Pastikan semua sambungan wayar selamat dan terlindung dengan betul.
Do not exceed the specified electrical ratings (110V AC, 10A).
This device is intended for outdoor use but should be mounted in a manner that protects it from direct water ingress, especially from above.

3. Produk Lebihview

3.1 Ciri-ciri

Automatic dusk-to-dawn operation.
Energy-saving design.
Pembinaan padat dan tahan lama.
Suitable for various outdoor lighting applications.

3.2 Komponen

The AITRIP Photocell Street Light Switch consists of a light-sensitive sensor, internal switching circuitry, and wire leads for connection. It includes a mounting bracket for secure installation.

Two AITRIP AC 110V 10A Photocell Street Light Switches with mounting brackets and wire leads.

Figure 1: AITRIP Photocell Street Light Switches. Each unit features a white sensor housing, a blue base, a metal mounting bracket, and three wire leads (black, white, red).

jarak dekat view of the AITRIP photocell switch showing the label with wiring instructions and dimensions.

Rajah 2: Terperinci view of the photocell switch, highlighting the product label with model number AS-10-110 10A, AC-110/10A, and wire color codes (LOAD RED, NEUT WHITE, LINE BLACK).

4. Spesifikasi

Parameter	Nilai
Model	AS-10-110
Vol Operasitage	AC 110V
Penilaian Semasa	10 Amps
Mod Operasi	Automatic (Dusk to Dawn)
Wattage	1100 watt (Maksimum)
Jenis Kenalan	Biasa Terbuka
Jenis Penyambung	Wire Leads (Screw Terminal Compatible)
Jenis Litar	1 hala
Bahan Kenalan	Tembaga
Penilaian Perlindungan Antarabangsa	IP54
Dimensi (Anggaran)	40mm x 32mm x 30mm (badan utama)

Diagram showing the dimensions of the AITRIP photocell switch in millimeters and inches.

Figure 3: Approximate dimensions of the photocell switch, including the mounting bracket.

5. Persediaan dan Pemasangan

Before beginning installation, ensure all power to the circuit is OFF at the main breaker or fuse box.

5.1 Arahan Pendawaian

The photocell switch has three color-coded wire leads:

Kawat Hitam: Sambung ke LINE (Live) input from the power source (AC 110V).
Kawat Putih: Sambung ke NEUTRAL wire from the power source and also to the NEUTRAL wire of the lighting fixture.
Kawat Merah: Sambung ke LOAD (Live) input of the lighting fixture.

Wiring diagram for the photocell switch showing connections to a light bulb. Black wire to input line, white wire to common zero line, red wire to output load.

Figure 4: Basic wiring diagram. Connect the black wire to the incoming live (input line), the white wire to the neutral (common zero line) and the neutral of the load, and the red wire to the live of the load (output load).

Detailed wiring diagram showing black wire to source, white wire to source and load, and red wire to load. Also illustrates correct and incorrect mounting positions.

Figure 5: Comprehensive wiring diagram and mounting guidance. The black wire connects to the live source, the white wire connects to the neutral source and the neutral of the lamp, and the red wire connects to the live of the lamp. Ensure the control is installed so it is not directly affected by the light of the turning-ON lamp itself. The diagram also shows correct mounting (sensor facing upwards/outwards) and incorrect mounting (sensor facing downwards or obstructed).

5.2 Lokasi Pemasangan

Proper mounting is crucial for optimal performance:

Mount the photocell in a location where it receives natural ambient light throughout the day.
Avoid mounting it where it will be directly exposed to artificial light sources (e.g., the light it controls, car headlights, streetlights) at night, as this can cause erratic operation (cycling on/off).
Ensure the sensor is not obstructed by eaves, trees, or other objects that could cast shadows on it during the day or block light at dusk/dawn.
Mount the unit with the sensor facing upwards or outwards to allow for proper light detection and to prevent water accumulation if possible. Some users recommend mounting sensor down to prevent water ingress, but this can affect light detection. Consider sealing the unit with waterproof silicone if mounting in a position prone to water collection.

6. Arahan Operasi

Once properly installed and power is restored, the AITRIP Photocell Street Light Switch operates automatically:

Senja: As ambient light levels decrease at dusk, the photocell sensor will detect the change and activate the connected lighting fixture.
Subuh: As ambient light levels increase at dawn, the photocell sensor will detect the change and deactivate the connected lighting fixture.
There may be a slight delay (a few seconds to a minute) in switching to prevent false triggers from transient light changes (e.g., car headlights).

Collage of images showing the photocell switch in various outdoor lighting scenarios, such as streetlights and garden lights, demonstrating its application.

Gambar 6: Cthamples of the photocell switch in use, controlling outdoor lighting fixtures.

7. Penyelenggaraan

The AITRIP Photocell Street Light Switch requires minimal maintenance:

Pembersihan: Periodically inspect the sensor window for dirt, dust, or debris. Gently clean with a soft, damp kain jika perlu. Jangan gunakan pembersih yang kasar.
Pemeriksaan: Annually check wire connections for tightness and signs of corrosion. Ensure the mounting bracket is secure.
Halangan: Ensure no new obstructions (e.g., growing foliage) are blocking the sensor's view of ambient light.

8. Penyelesaian masalah

Masalah	Kemungkinan Punca	Penyelesaian
Lampu kekal menyala pada siang hari.	Sensor is obstructed or in a shaded area. Sensor is faulty.	Relocate the photocell to an area with direct ambient light. Kosongkan sebarang halangan. Replace the unit if faulty.
Lampu tidak menyala pada waktu malam.	Tiada kuasa kepada unit. Sambungan pendawaian longgar. Sensor is exposed to artificial light at night. Sensor is faulty. Connected light bulb is faulty.	Periksa pemutus litar. Verify all wiring connections are secure (Black, White, Red). Relocate the photocell away from artificial light sources. Replace the unit if faulty. Test or replace the light bulb.
Lights cycle on/off rapidly.	Sensor is detecting light from the connected fixture or other nearby artificial light.	Adjust the mounting position to prevent the sensor from being illuminated by the controlled light or other artificial lights. Consider adding a shield to block direct light from the fixture to the sensor.
Kemasukan air ke dalam unit.	Improper mounting allowing water to collect. Integriti meterai terjejas.	Ensure the unit is mounted to shed water effectively. Apply waterproof silicone sealant around seams if necessary, especially if mounting sensor-down. Replace the unit if damaged by water.

9. Waranti dan Sokongan

AITRIP products are designed for reliability and performance. For specific warranty information, please refer to the product packaging or contact your retailer. If you encounter any issues or require technical assistance, please contact AITRIP customer support through your purchase platform or the official AITRIP webtapak.

Please have your model number (AS-10-110) and purchase date available when contacting support.

AITRIP AS-10-110