HOTONE Jogg USB Audio Interface Pedal User Manual

pengenalan

The Hotone Jogg is a compact, low-latency 1-in/2-out USB audio interface pedal designed to integrate your pedalboard with computer-based recording setups. It features high-headroom 24-bit conversion and supports 44.1kHz/48kHz sample rates for high-quality audio. Connectivity includes a 1/4-inch hi-Z instrument input, 1/4-inch unbalanced stereo outputs, an auxiliary input, a headphone output, and an XLR balanced output. The Jogg also provides a Gain knob for input level adjustment and an Output knob for overall output control. An activation code for Hotone's VStomp amp modeling software is included.

Ciri-ciri Produk

• 1-in/2-out USB Audio Interface Pedal with 24-bit AD/DA conversion.
• Supports 44.1kHz/48kHz Sampling Rates for Mac/PC/iOS/Android devices.
• Compact and durable stompbox design.
• Features a 1/4-inch hi-Z instrument input.
• Includes 1/4-inch unbalanced stereo outputs.
• Dedicated auxiliary input and headphone output.
• XLR balanced output for professional connections.
• Adjustable Gain knob (up to +12dB) and Output level knob.
• Comes with an activation code for Hotone VStomp amp modeling software.

Persediaan

1. Connecting the Jogg Pedal

The Hotone Jogg is designed for easy integration into your audio setup. Follow these steps to connect your device:

1. Sambungan Kuasa: Connect the Jogg to a 9V DC power supply (not included) via the DC 9V input. Alternatively, connect the Jogg to your computer using the provided USB-C cable for bus power.
2. Input Instrumen: Plug your instrument (e.g., guitar) into the 1/4-inch HI-Z input on the front panel.
3. Output Audio: Connect your monitoring speakers or headphones to the 1/4-inch unbalanced stereo outputs (OUT R, OUT L) or the dedicated headphone output. For balanced output, use the XLR OUT.
4. Input Bantu: Use the AUX IN to connect external audio sources like a smartphone or media player.
5. Sambungan USB: Connect the Jogg to your computer (Mac/PC) or mobile device (iOS/Android) using the USB-C port. This enables audio transmission and bus power.

Rajah 1: Secara keseluruhan view of the Hotone Jogg USB Audio Interface Pedal.

Figure 2: Top panel showing Gain and Output knobs, and input jacks.

Figure 3: Rear panel with USB, DC 9V, AUX IN, and PHONES connections.

Rajah 4: Sisi view displaying the XLR balanced output.

Rajah 5: Sisi view showing the 1/4-inch unbalanced stereo outputs (OUT R, OUT L).

2. Pemasangan Perisian

For optimal performance and access to included features, ensure you install the necessary drivers and software:

• Pemandu: Visit the official Hotone website to download and install the latest USB audio drivers for your operating system (Mac, PC, iOS, Android).
• VStomp Software: Use the provided activation code to download and register Hotone's VStomp amp modeling software. Follow the on-screen instructions for installation.

Arahan Operasi

1. Adjusting Input Gain

The Jogg features a Gain knob to control the input level of your instrument. Rotate the knob clockwise to increase gain and counter-clockwise to decrease it. Adjust this to achieve a strong signal without clipping (distortion).

2. Controlling Output Level

The Output knob controls the overall output volume of the Jogg. Adjust this to a comfortable listening level for your speakers or headphones.

3. Monitoring Your Audio

Connect headphones to the PHONES output for direct monitoring of your input signal and playback from your computer. Adjust the Output knob to control the headphone volume.

4. Using VStomp Software

Once VStomp is installed and registered, launch the software on your computer. The Jogg will act as the hardware interface, allowing you to utilize VStomp's amp modeling and effects. Refer to the VStomp user manual for detailed instructions on software operation.

Penyelenggaraan

• Pembersihan: Use a soft, dry cloth to clean the exterior of the Jogg. Avoid abrasive cleaners or solvents.
• Storan: Simpan pedal di tempat yang sejuk dan kering, jauh daripada cahaya matahari langsung dan suhu yang melampau apabila tidak digunakan.
• Pengendalian: Handle the pedal with care to prevent damage to knobs, jacks, and internal components.

Menyelesaikan masalah

• Tiada Kuasa: Ensure the USB-C cable is securely connected to both the Jogg and your computer/power source. If using a DC adapter, verify it is the correct voltage (9V) and polarity.
• Tiada Input Bunyi: Check all instrument and microphone connections. Verify the Gain knob is adjusted appropriately. Ensure the correct input device is selected in your computer's audio settings or DAW.
• Tiada Keluaran Bunyi: Check speaker/headphone connections. Adjust the Output knob. Verify the correct output device is selected in your computer's audio settings or DAW.
• Isu Latensi: Ensure you have installed the latest drivers from the Hotone website. Adjust buffer size settings in your DAW to a lower value (if your system can handle it).
• Software Not Recognizing Jogg: Reinstall the USB drivers. Ensure the Jogg is connected and powered on before launching your DAW or VStomp software.

Spesifikasi

Waranti dan Sokongan

For information regarding product warranty, technical support, and service, please refer to the official Hotone webtapak atau hubungi perkhidmatan pelanggan mereka secara langsung. Simpan resit pembelian anda sebagai bukti pembelian untuk tuntutan waranti.

Official Hotone Webtapak: hotoneaudio.com