Ohaus NVT6200 Navigator Series Portable Balance Instruction Manual

1. Pengenalan

The Ohaus Navigator Series Portable Balance, model NVT6200, is designed for accurate and repeatable weighing in various settings, including laboratory, industrial, and educational environments. This balance features fast stabilization, robust overload protection, and intuitive operation to enhance user efficiency and productivity.

Ciri-ciri utama termasuk:

• Fast stabilization time (less than one second).
• Overload protection up to four times its rated capacity.
• Touchless sensor for hands-free operation (zero, print, tare, change functions).
• Multiple weighing modes: Weighing, Parts Counting, Percent Weighing, Checkweighing.
• Multiple units of measure: g, kg, N, oz, ozt, dwt, lb, lb/oz, ct, grain.

Figure 1: Ohaus NVT6200 Navigator Series Portable Balance. This image shows the balance with its weighing pan and LCD display.

2. Persediaan

Follow these steps to set up your Ohaus NVT6200 Portable Balance:

1. Membongkar: Carefully remove the balance and all accessories from the packaging. Retain the packaging for future transport or storage.
2. penempatan: Place the balance on a stable, level surface free from vibrations, drafts, and direct sunlight. Ensure the surface can support the weight of the balance and any items to be weighed.
3. Sambungan Kuasa:
   • Penyesuai AC: Connect the supplied AC adapter to the balance's power input and then to a suitable power outlet.
   • Kuasa Bateri: For portable use, install four "C" batteries (not included) into the battery compartment located on the underside of the balance. Ensure correct polarity.
4. meratakan: Use the adjustable feet and the spirit level (if present, typically near the display) to ensure the balance is perfectly level. Adjust the feet by turning them clockwise or counter-clockwise until the bubble in the spirit level is centered.
5. Kuasa Awal Hidup: Tekan ke HIDUP/MATI button to turn on the balance. Allow a brief warm-up period for optimal performance.

3. Operasi

This section outlines the basic operational procedures for the NVT6200 balance.

3.1 Penimbangan Asas

1. Turn on the balance by pressing the HIDUP/MATI butang.
2. Wait for the display to show "0.00 g" (or the last used unit) and the stability indicator to appear.
3. Place the item to be weighed on the center of the weighing pan.
4. Read the stable weight value displayed on the LCD.
5. Remove the item from the pan.

3.2 Penarikan (Sifar)

To weigh an item in a container, use the Tare function:

1. Place the empty container on the weighing pan.
2. Tekan ke SASARAN button (or use the touchless sensor if configured). The display will return to "0.00 g".
3. Add the item to be weighed into the container. The display will show the net weight of the item.

3.3 Changing Weighing Units

The NVT6200 supports multiple weighing units. To change the unit:

• Tekan ke UNIT button (or use the touchless sensor if configured) repeatedly to cycle through the available units (g, kg, N, oz, ozt, dwt, lb, lb/oz, ct, grain).
• Stop when the desired unit is displayed.

3.4 Using Weighing Modes

The balance offers various application modes:

• Penimbangan: Ukuran berat piawai.
• Pengiraan Bahagian: For counting a large number of identical items based on a reference weight.
• Percent Weighing: For measuring the weight of a sample sebagai percentage dari berat rujukan.
• Checkweighing: For checking if a sample's weight falls within a specified target range.

Refer to the detailed user manual for specific instructions on configuring and using each weighing mode, typically accessed via a MODE or FUNGSI butang.

4. Penyelenggaraan

Proper maintenance ensures the longevity and accuracy of your Ohaus NVT6200 balance.

• Pembersihan:
  • Always disconnect the balance from the power supply before cleaning.
  • Clean the weighing pan and housing with a soft cloth dampdisapu dengan detergen ringan atau air.
  • Jangan gunakan pembersih yang melelas, pelarut atau bahan kimia yang keras.
  • Ensure no liquid enters the balance housing.
• Penentukuran: Regular calibration with certified weights is recommended to maintain accuracy, especially after relocation or significant temperature changes. Refer to the full Ohaus manual for calibration procedures specific to the NVT6200 model.
• Storan: When not in use for extended periods, store the balance in a clean, dry, and stable environment. Engage the integrated shipping lock to protect the weighing cell during transportation or storage.

5. Penyelesaian masalah

If you encounter issues with your NVT6200 balance, refer to the following common problems and solutions:

If the problem persists, contact Ohaus customer support or an authorized service center.

6. Spesifikasi

Technical specifications for the Ohaus NVT6200 Navigator Series Portable Balance:

• model: NVT6200
• Kapasiti Maksimum: 6200 Gram
• Readability (Accuracy): 1 gram
• Saiz kuali: 9.1" x 6.9"
• Jenis Paparan: LCD
• Bahan: Stainless Steel (pan)
• Kuasa: AC Adaptor (Included) or 4 "C" Batteries (Not Included)
• Unit ukuran: g, kg, N, oz, ozt, dwt, lb, lb/oz, ct, grain
• Weighing Modes: Timbang, Pengiraan Bahagian, Peratus Timbang, Penimbang
• Julat Tara: Full Capacity by Subtraction
• Berat Barang: Kira-kira 5 Pound

7. Waranti dan Sokongan

Ohaus products are manufactured under stringent quality standards. For warranty information and technical support, please refer to the official Ohaus website or contact your local Ohaus representative.

It is recommended to register your product to receive updates and support. Keep your purchase receipt as proof of purchase for warranty claims.

For further assistance, visit the official Ohaus webtapak: www.ohaus.com