Nora Lighting Josh LED Puck Light User Manual

pengenalan

Thank you for choosing the Nora Lighting Josh LED Puck Light. This manual provides essential information for the safe installation, operation, and maintenance of your LED puck light. Please read these instructions thoroughly before installation and and keep them for future reference.

The Josh LED Puck Light is a versatile, low-profile lighting solution designed for accent, under-cabinet, in-cabinet, niche, and jewelry case applications. Its slim design allows for flexible placement and provides even illumination. This LED fixture is designed for either recessed or surface mounting.

Maklumat Keselamatan Penting

• AMARAN: Risiko renjatan elektrik. Putuskan sambungan kuasa pada fius atau pemutus litar sebelum pemasangan atau servis.
• Produk ini mesti dipasang mengikut kod pemasangan yang berkenaan oleh orang yang biasa dengan pembinaan dan pengendalian produk serta bahaya yang terlibat.
• Use only with a 12V DC dimmable power supply (sold separately). Ensure the power supply is compatible with LED lighting.
• Jangan ubah suai lekapan atau komponennya. Sebarang pengubahsuaian boleh membatalkan jaminan dan menimbulkan bahaya keselamatan.
• Avoid looking directly into the LED light source when illuminated.
• Ensure proper ventilation around the fixture and power supply.
• Jauhkan daripada bahan mudah terbakar.
• This fixture is suitable for dry locations only.

Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:

• Nora Lighting Josh LED Puck Light (Model NMP-LED30BZ)
• Perkakasan pemasangan (skru, klip, dll. - specific hardware may vary)
• Manual Arahan (dokumen ini)

Note: A 12V DC dimmable power supply is required and sold separately.

Arahan Pemasangan

The Josh LED Puck Light can be installed as either a recessed or surface-mounted fixture.

Pemasangan Tersembunyi

1. Sediakan Pembukaan: Cut a circular hole in the desired mounting surface. Refer to the specifications section for the exact cutout diameter. Ensure there is sufficient clearance behind the mounting surface for the fixture.
2. Pendawaian: Route the 12V DC wiring from your power supply to the installation location. Connect the fixture's wires to the 12V DC power supply output, ensuring correct polarity (positive to positive, negative to negative).
3. Sisipkan Lekapan: Gently push the puck light into the prepared opening. The spring clips (if present) will secure the fixture in place.

Pemasangan Permukaan

1. Tandakan Titik Pelekap: Position the puck light in the desired location. Mark the screw hole positions on the mounting surface.
2. Secure Mounting Plate/Clips: If a separate mounting plate or clips are provided, secure them to the surface using the supplied screws.
3. Pendawaian: Route the 12V DC wiring from your power supply. Connect the fixture's wires to the 12V DC power supply output, ensuring correct polarity.
4. Lampirkan Lekapan: Secure the puck light to the mounting plate or clips. Ensure the fixture is firmly attached.

Image: The Nora Lighting Josh LED Puck Light in a bronze finish, shown from an angled top-down view. The light features a circular design with a central frosted diffuser and a textured bronze outer ring, suitable for both recessed and surface mounting.

After installation, connect the 12V DC power supply to a suitable power source. Test the light fixture.

Arahan Operasi

The Nora Lighting Josh LED Puck Light operates on a 12V DC power supply. Once properly installed and connected to a compatible power source, the light can be controlled via the switch or dimmer connected to your 12V DC power supply.

• Menghidupkan/Mematikan: Use the wall switch or inline switch connected to your 12V DC power supply to turn the light on or off.
• Peredupan: If using a dimmable 12V DC power supply and a compatible dimmer switch, you can adjust the brightness of the puck light. Ensure the dimmer is rated for LED loads.

The LED technology provides instant illumination without flicker, delay, or warm-up time.

Penyelenggaraan

The Nora Lighting Josh LED Puck Light requires minimal maintenance.

• Pembersihan: Putuskan sambungan kuasa sebelum membersihkan. Gunakan yang lembut, kering, atau sedikit damp cloth to wipe the exterior of the fixture. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as these can damage the finish or optical components.
• Panjang Umur LED: Sumber cahaya LED bersepadu direka bentuk untuk jangka hayat yang panjang dan tidak memerlukan penggantian.
• Pemeriksaan: Periodically inspect the wiring and connections for any signs of damage or wear. If any damage is observed, disconnect power immediately and consult a qualified electrician.

Menyelesaikan masalah

If troubleshooting steps do not resolve the issue, contact Nora Lighting customer support or a qualified electrician.

Spesifikasi

Note: Dimensions for cutout and fixture size are not provided in the source data. Please refer to product packaging or Nora Lighting's official webtapak untuk pengukuran yang tepat.

Waranti dan Sokongan

For warranty information, technical support, or to inquire about replacement parts, please contact Nora Lighting directly through their official webtapak atau saluran perkhidmatan pelanggan.

Sila simpan bukti pembelian anda untuk sebarang tuntutan waranti.