1. Pengenalan
The Walfront GT8907 is a handheld digital anemometer designed for precise measurement of wind speed, temperature, and air volume. This device is suitable for various applications including industrial settings, environmental monitoring, HVAC system analysis, and outdoor activities. It features a high-definition large screen display for clear readings and soft rubber buttons for comfortable operation. This manual provides detailed instructions for the proper setup, operation, and maintenance of your GT8907 anemometer.
Figure 1: Walfront GT8907 Anemometer with its wind fan probe connected, displaying wind speed and temperature.
2. Kandungan Pakej
Sila semak kandungan bungkusan selepas diterima untuk memastikan semua item ada:
- Walfront GT8907 Digital Anemometer Unit
- Wind Fan Probe (connected via cable)
- USB Cable (for data transfer, if applicable)
- Manual Pengguna (dokumen ini)
- Membawa Sarung
Figure 2: The protective carrying case for the GT8907 anemometer, designed for safe storage and transport.
3. Peranti Lebihview
Familiarize yourself with the components and controls of the GT8907 anemometer:
Figure 3: Detailed diagram of the GT8907 anemometer, highlighting the main unit's screen and buttons, and the wind fan probe with its telescopic rod and handle.
- Skrin: High-definition LCD display for readings.
- Butang Kunci: To hold current readings.
- Mode Switch / Enter Button: To cycle through measurement modes and confirm selections.
- Suis Kelantangan Udara: To switch to air volume measurement.
- ON/OFF / Unit Button: Power on/off the device; short press to change units.
- Setting Area: For configuring measurement area for air volume.
- Butang Simpan: To save data.
- Read Data Button: To recall saved data.
- Delete Data Button: To delete saved data.
- Wind Fan: Rotates to measure wind speed.
- Rod Teleskopik: Extends the wind fan for reaching measurement points.
- pemegang: Ergonomic grip for the wind fan probe.
4. Persediaan
4.1 Pemasangan Bateri
The GT8907 anemometer requires four (4) 1.5V AAA batteries (not included). Follow these steps to install the batteries:
- Locate the battery compartment cover on the back of the main unit.
- Luncurkan penutup ke bawah atau tekan selak untuk membukanya.
- Insert four AAA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
- Gantikan penutup petak bateri, pastikan ia terpasang dengan selamat pada tempatnya.
Figure 4: The open battery compartment of the GT8907, showing the correct orientation for inserting four AAA batteries.
4.2 Sambungan Probe
Ensure the wind fan probe is securely connected to the main unit via its cable. The connector should fit snugly into the port on the top of the main unit.
5. Arahan Operasi
5.1 Hidupkan/Mati Kuasa
- Untuk menghidupkan peranti, tekan dan tahan butang HIDUP/MATI butang.
- Untuk mematikan peranti, tekan dan tahan butang HIDUP/MATI button again. The device also features an auto-power-off function to conserve battery life.
5.2 Menukar Unit Pengukuran
With the device powered on, short press the UNIT button (which is also the ON/OFF button) to cycle through available wind speed units (m/s, Ft/min, Knots, Km/h, Mph) and temperature units (°C, °F).
5.3 Wind Speed and Temperature Measurement
The device automatically displays wind speed and temperature upon power-on. Extend the telescopic rod of the wind fan probe and position the fan in the airflow you wish to measure. Ensure the fan is facing directly into the wind for accurate readings.
Figure 5: The GT8907 anemometer in use, showing its digital display with wind speed and temperature readings against a backdrop of wind turbines.
5.4 Air Volume Measurement (CFM/CMM)
- Tekan ke VEL/ALIRAN button to switch to air volume measurement mode.
- Tekan ke AREA/SAMPLE button to enter the area setting mode.
- Use the arrow buttons (if available, or other designated buttons) to adjust the measurement area (e.g., duct dimensions). Refer to the on-screen prompts.
- Tekan MASUK to confirm the area setting.
- Position the wind fan probe in the airflow. The device will display the air volume in CFM (Cubic Feet per Minute) or CMM (Cubic Meters per Minute).
5.5 Fungsi Pegangan Data
Tekan ke TAHAN button to freeze the current readings on the display. Press it again to release the hold function and resume live measurements.
5.6 Penyimpanan dan Pengingatan Data
- To save a reading, press the JIMAT butang.
- To recall saved data, press the BACA button. Use navigation buttons (if available) to browse through saved records.
- To delete saved data, press the DEL butang.
6. Penyelenggaraan
6.1 Pembersihan
Wipe the device and probe with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the wind fan is free from dust and debris for accurate operation.
6.2 Penggantian Bateri
When the low battery indicator appears on the display, replace all four AAA batteries as described in Section 4.1. Remove batteries if the device will not be used for an extended period to prevent leakage.
6.3 Penyimpanan
Store the anemometer in its protective carrying case in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the wind fan probe is retracted or protected to prevent damage.
7. Penyelesaian masalah
- Peranti tidak dihidupkan:
- Periksa sama ada bateri dipasang dengan betul dengan polariti yang betul.
- Gantikan dengan bateri AAA yang baru.
- Bacaan tidak tepat:
- Ensure the wind fan is clean and rotates freely.
- Verify the probe is securely connected to the main unit.
- Confirm the device is set to the correct measurement unit.
- Ensure the wind fan is positioned directly in the airflow.
- Paparan malap atau kosong:
- Gantikan bateri.
- Ensure the device is not exposed to extreme temperatures.
8. Spesifikasi
| Parameter | Spesifikasi |
|---|---|
| Model | GT8907 |
| Julat Pengukuran Kelajuan Angin | 0.0 - 45.0 m/s; 0.0 - 8800 Ft/min; 0.0 - 88.0 Knots; 0.0 - 140.0 Km/h; 0.0 - 100 Mph |
| Resolusi Kelajuan Angin | 0.01 (m/s, Knots, Mph); 0.01/0.1/1 (Ft/min); 0.01 (Km/h) |
| Wind Speed Precision | ±3% ±0.1 (m/s); ±3% ±20 (Ft/min); ±3% ±0.2 (Knots); ±3% ±0.4 (Km/h); ±3% ±0.2 (Mph) |
| Air Volume Measurement Range (CFM) | 0 - 999900 ft³/min |
| Air Volume Measurement Range (CMM) | 0 - 999900 m³/min |
| Julat Pengukuran Suhu | 0 - 45°C / 32 - 113°F |
| Resolusi Suhu | 0.1°C / 0.18°F |
| Ketepatan Suhu | ± 1.0 ° C / ± 1.8 ° F |
| Julat Pengukuran Kelembapan | 10 - 90% RH (without condensation) |
| Penyelesaian Kelembapan | 0.1% RH |
| Ketepatan Kelembapan | ±5% |
| Suhu Persekitaran Kerja | 0 - 50°C (32 - 122°F) |
| Kelembapan Persekitaran Kerja | 40 - 80% RH |
| Suhu Keadaan Penyimpanan | -40 - 60°C (-40 - 140°F) |
| Storage Condition Humidity | ≤80% RH |
| Bekalan Kuasa | 4 x 1.5V bateri AAA |
| Berat badan | Kira-kira 1214 g / 42.8 oz |
| Dimensi (L x W x H) | 3.94 x 3.94 x 3.94 inci (Unit Utama) |
9. Waranti dan Sokongan
Walfront products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Walfront webtapak. Simpan resit pembelian anda sebagai bukti pembelian untuk tuntutan waranti.
For further assistance, you may contact Walfront customer service through their official channels. Please have your model number (GT8907) and purchase details ready.