Utilitech MPL1025-C500K9030

Utilitech 500-Watt Halogen Stand Work Light Instruction Manual

Model: MPL1025-C500K9030

pengenalan

This manual provides essential information for the safe and efficient operation of your Utilitech 500-Watt Halogen Stand Work Light. This work light is ETL rated for wet locations and features a 2 ft cord with a 3-prong grounded plug. Please read all instructions carefully before use and retain this manual for future reference.

Maklumat Keselamatan

Sentiasa ikuti langkah berjaga-jaga keselamatan asas untuk mengurangkan risiko kebakaran, kejutan elektrik dan kecederaan diri.

  • Ensure the work light is placed on a stable, level surface.
  • Do not operate the light near flammable materials.
  • Allow the bulb to cool completely before handling or replacing. Halogen bulbs become extremely hot during operation.
  • Do not look directly into the light source when it is on.
  • Keep the cord away from heat, oil, sharp edges, and moving parts.
  • Always unplug the light from the power source before performing any maintenance or adjustments.
  • This product is designed for temporary outdoor use and is ETL rated for wet locations. However, avoid submerging the unit in water.

Produk Selesaiview

The Utilitech 500-Watt Halogen Stand Work Light is designed to provide bright illumination for various tasks. It features a durable construction and adjustable head for directional lighting.

Utilitech 500-Watt Halogen Stand Work Light

Rajah 1: Depan view of the Utilitech 500-Watt Halogen Stand Work Light, showing the yellow stand, black light housing, and protective metal grill.

Utilitech 500-Watt Halogen Stand Work Light with Dimensions

Figure 2: Dimensions of the Utilitech 500-Watt Halogen Stand Work Light. The light measures approximately 10 inches in length, 8.9 inches in width, and 11.8 inches in height.

Persediaan

The Utilitech 500-Watt Halogen Stand Work Light comes pre-assembled. Follow these steps for initial setup:

  1. Place the work light on a stable, flat surface.
  2. Ensure the power cord is free from kinks or damage. The light features a 2-foot cord with a 3-prong grounded plug.
  3. To adjust the horizontal angle of the light, loosen the knob located on the underside of the light housing. Rotate the light to the desired left or right position, then tighten the knob securely.
  4. To adjust the vertical angle of the light, loosen the knob located on the side of the light housing. Tilt the light up or down to the desired angle, then tighten the knob securely.

Arahan Operasi

To operate your work light:

  1. Plug the 3-prong grounded plug into a compatible electrical outlet.
  2. Ensure the light is positioned to illuminate your work area effectively.
  3. The light will turn on immediately upon plugging in. There is no separate on/off switch on this model.
  4. When finished, unplug the light from the electrical outlet.
  5. Allow the light to cool down completely before moving or storing.

Penyelenggaraan

Regular maintenance ensures the longevity and safe operation of your work light.

  • Pembersihan: Putuskan sambungan kuasa sebelum membersihkan. Gunakan kain lembut danamp kain untuk mengelap bahagian luar lampu. Jangan gunakan pembersih atau pelarut yang kasar.
  • Penggantian mentol:
    1. Ensure the light is unplugged and completely cool.
    2. Carefully remove the protective metal grill.
    3. Gently remove the old halogen bulb. Avoid touching the new bulb with bare hands, as oils can reduce its lifespan. Use a clean cloth or glove.
    4. Insert the new 500-watt halogen bulb, ensuring it is seated correctly.
    5. Replace the protective metal grill.
  • Pemeriksaan Kord: Periodically inspect the power cord for any signs of damage, cuts, or fraying. If damage is found, discontinue use and have the cord repaired by a qualified electrician.
  • Storan: Store the work light in a dry, cool place when not in use.

Menyelesaikan masalah

MasalahKemungkinan PuncaPenyelesaian
Cahaya tidak menyala.Tiada kuasa ke saluran keluar.
Mentol terbakar.
Sambungan longgar.
Periksa salur keluar kuasa dengan peranti lain.
Replace the halogen bulb.
Pastikan palam dimasukkan sepenuhnya ke dalam alur keluar.
Cahaya berkelip-kelip.Mentol longgar.
Bekalan kuasa tidak stabil.
Pastikan mentol dipasang dengan selamat.
Cuba pasangkan ke soket lain.
Cahaya malap.Mentol menghampiri penghujung hayat.
Dirt/debris on bulb or reflector.
Ganti mentol.
Clean the bulb and reflector when cool and unplugged.

Spesifikasi

  • Jenama: Utilitech
  • Nombor Model: MPL1025-C500K9030
  • Sumber Kuasa: Elektrik Bertali
  • Wattage: 500 Watt
  • Jenis Sumber Cahaya: Halogen
  • warna: kuning
  • Bahan: Glass (Shade), Metal (Stand)
  • Jenis Selesai: Disikat
  • Dimensi Produk: 10"L x 8.9"W x 11.8"H
  • Panjang Kord: 2 kaki
  • Jenis Palam: Palam dibumikan 3 serampang
  • Penilaian Keselamatan: ETL dinilai untuk lokasi basah
  • UPC: 354838487954

Video Produk Rasmi

Tiada video produk rasmi daripada penjual tersedia untuk produk ini pada masa ini.

Waranti dan Sokongan

Specific warranty information and direct support contact details are not provided in the available product data. Please refer to the product packaging or the manufacturer's official weblaman web untuk terma jaminan dan hubungan sokongan pelanggan.

© 2023 Utilitech. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.