pengenalan
This manual provides essential information for the safe and efficient operation of your Renogy 2000W 12V Pure Sine Wave Power Inverter. This device converts 12V DC battery power into 230V AC household power, suitable for a wide range of electronic devices and appliances. Please read this manual thoroughly before installation and use, and retain it for future reference.
Image: The Renogy 2000W Pure Sine Wave Power Inverter, a black rectangular unit with blue accents, shown in a typical outdoor setting.
Arahan Keselamatan
- Keselamatan Elektrik: Always ensure proper grounding. Do not expose the inverter to water, rain, or excessive moisture. Operate in a well-ventilated area.
- Sambungan Bateri: Connect the inverter directly to a 12V deep cycle battery. Ensure correct polarity (positive to positive, negative to negative). Incorrect connections can damage the inverter and battery.
- Kapasiti Muatan: Do not exceed the inverter's continuous power rating of 2000W or peak power rating of 4000W. Overloading can cause damage and pose a fire hazard.
- Pengudaraan: Ensure adequate airflow around the inverter to prevent overheating. Do not block ventilation openings.
- Kanak-kanak dan Haiwan Kesayangan: Jauhkan inverter daripada capaian kanak-kanak dan haiwan peliharaan.
- Penyelenggaraan: Disconnect all power before performing any maintenance or cleaning.
Kandungan Pakej
Sahkan bahawa semua item terdapat dalam pakej:
- Renogy 2000W 12V 220V Pure Sine Wave Inverter x 1
- 20 mm² Cable x 1
- Remote Control (cable length: approximately 3m) x 1
Image: A close-up of a high-quality copper cable, indicating the type of accessory included for optimal performance.
Ciri-ciri Produk
- Penukaran DC-AC yang Berkuasa: Provides 2000W continuous power (4000W peak) from 12V DC to 230V AC with 90% conversion efficiency.
- Teknologi Gelombang Sinus Tulen: Delivers stable, clean power comparable to grid electricity, protecting sensitive electronics and extending their lifespan.
- Sistem Perlindungan Komprehensif: Features LED indicators for under-voltage, lebihan voltage, over-temperature, overload, and short-circuit protection. Includes a cooling fan and internal DC fuse for enhanced safety.
- Integrated Grid Priority Circuit: Ensures continuous 230V power by automatically switching between shore power and inverter power.
- Julat Aplikasi yang Luas: Suitable for PCs, laptops, tablets, medical devices, and various household appliances.
- Reka Bentuk Mesra Pengguna: Equipped with 2 AC outlets and a remote control for convenient operation.
- Pembinaan Tahan Lama: Logam teguh casing protects against impacts. High-speed fans maintain optimal operating temperature.
Imej: Depan view of the Renogy 2000W Inverter, highlighting the two AC outlets and the main power switch.
Image: The Renogy 2000W Inverter displaying icons for its six electronic protection features, including over-temperature, short circuit, and overload protection.
Imej: Belakang view of the inverter, showing the dual cooling fans designed for powerful heat dissipation and efficient system operation.
Persediaan
Lokasi Pemasangan
Install the inverter in a dry, cool, and well-ventilated area. Avoid direct sunlight, heat sources, and moisture. Ensure sufficient clearance around the unit for proper airflow.
Gambarajah Pendawaian
Follow the diagram below for correct connection of the inverter to your solar power system. Ensure all connections are secure and properly insulated.
Image: A detailed wiring diagram illustrating the connections between solar panels, charge controller, battery, inverter, and various DC/AC loads in a solar power system.
Menyambung ke Bateri
- Ensure the inverter is switched OFF.
- Connect the supplied 20 mm² cable to the DC input terminals on the rear of the inverter. Ensure positive (+) is connected to positive and negative (-) to negative.
- Connect the other end of the cables to your 12V deep cycle battery. Use appropriate fuses or circuit breakers as recommended for your system.
- Ketatkan semua sambungan dengan kukuh untuk mengelakkan sentuhan longgar dan lengkungan.
Menyambung Beban AC
Plug your AC appliances directly into the 230V AC outlets on the front of the inverter. Ensure the total power consumption of your appliances does not exceed 2000W.
Arahan Operasi
Menghidupkan/Mematikan
- Ensure all DC and AC connections are correctly made.
- Press the main power switch on the front of the inverter to the 'ON' position. The indicator lights will illuminate.
- To power off, switch the main power switch to the 'OFF' position.
Menggunakan Alat Kawalan Jauh
The included remote control allows you to power the inverter on or off from a distance, which is convenient when the inverter is installed in an inaccessible location.
Image: The remote control unit for the Renogy inverter, featuring an on/off switch and indicator lights, mounted on a wooden surface.
- Connect the remote control cable to the designated port on the inverter.
- Use the switch on the remote control to turn the inverter ON or OFF.
Lampu Penunjuk
The inverter features LED indicators that provide status information and alert you to potential issues:
- LED hijau: Menunjukkan operasi normal.
- LED Merah: Indicates a fault or protection mode (e.g., overload, over-temperature, low voltage). Refer to the Troubleshooting section for details.
Penyelenggaraan
- Pembersihan: Periodically clean the exterior of the inverter with a dry cloth. Ensure ventilation openings are free from dust and debris. Do not use liquid cleaners.
- Semakan Sambungan: Regularly inspect all DC and AC connections for tightness and corrosion. Tighten any loose connections.
- Kesihatan Bateri: Ensure your battery is well-maintained and charged to prolong its lifespan and the inverter's performance.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Inverter tidak menyala | Loose battery connection; Low battery voltage; Fius putus | Check battery connections; Charge battery; Replace fuse (if applicable and safe to do so) |
| Tiada output AC | Overload; Over-temperature; Low/High input voltage | Reduce load; Allow inverter to cool; Check battery voltage |
| Red LED indicator is on | Overload; Over-temperature; Input voltage out of range; Short circuit | Identify and resolve the specific fault condition. Disconnect loads, check connections, allow cooling. |
| Kipas tidak beroperasi | Normal operation (fan activates under load/temperature); Fan malfunction | Ensure inverter is under load or operating at higher temperatures. If no fan operation under load, contact support. |
Spesifikasi
| Spesifikasi | Nilai |
|---|---|
| Jenama | Renogy |
| Nama Model | R-INVT-PUH1-201235-DE/EU |
| Kuasa (Berterusan) | 2000 Watt |
| Kuasa Keluaran Puncak | 4000 Watt |
| Input Voltage | 12 Volt (DC) |
| Keluaran Voltage | 230 Volt (AC) |
| Bentuk Gelombang Output | Gelombang Sinus Tulen |
| Kekerapan | 50 Hz |
| Jumlah Outlet Kuasa | 2 |
| Dimensi (L x W x H) | 48.2L x 22W x 9.2H cm |
| Berat Barang | 4.8 Kilogram |
| Penggunaan yang Disyorkan | Powering sensitive electronics during camping or outdoor activities, medical devices, household appliances during travel or off-grid living. |
| Pensijilan | ETL, CE, UKCA, RoHS, ECE R10 |
Waranti dan Sokongan
The Renogy 2000W 12V Pure Sine Wave Power Inverter comes with a Waranti 2 tahun covering materials and manufacturing defects.
For technical support, warranty claims, or any product-related inquiries, please contact Renogy customer service directly. If you encounter any issues, especially transport-related damage, please reach out via buyer message for assistance with replacement or partial refund options.
Please visit the official Renogy weblaman web atau rujuk dokumentasi pembelian anda untuk maklumat hubungan terkini.