Cisco CP-HS-WL-561-S-US

Cisco 561 Wireless Mono Headset User Manual

Model: CP-HS-WL-561-S-US

1. Pengenalan dan Lebihview

The Cisco 561 Wireless Mono Headset is designed for professional use, offering clear audio and wireless freedom. This headset features DECT 6.0 technology for an extended operating range and is optimized for use with Cisco IP Phones, Cisco Jabber, and Webex devices. Its lightweight, over-the-head design ensures comfort during prolonged use, while the uni-directional microphone provides excellent voice clarity.

Cisco 561 Wireless Mono Headset

Image 1.1: The Cisco 561 Wireless Mono Headset, showcasing its sleek design and single earpiece.

2. Arahan Persediaan

Follow these steps to set up your Cisco 561 Wireless Mono Headset and its standard base station.

  1. Buka Pembungkusan Komponen: Carefully remove the headset, base station, power adapter, and any included cables from the packaging.
  2. Sambungkan Kuasa: Plug the power adapter into the base station and then into a power outlet. The base station's indicator lights should illuminate.
  3. Sambung ke Peranti:
    • For Cisco IP Phones: Connect the base station to your Cisco IP Phone using the appropriate USB-A or RJ-9/AUX cable. Refer to your phone's manual for specific port locations.
    • For Computers/Webex Devices: Connect the base station to your computer's USB-A port.
  4. Mengecas Alat dengar: Place the headset onto the base station's charging cradle. Ensure it is seated correctly. The charging indicator on the base or headset will show charging status. Allow the headset to fully charge before first use (approximately 2-3 hours for a full charge).
  5. Pair Headset (if not pre-paired): Most headsets are pre-paired. If pairing is required, consult the base station's specific pairing button and the headset's power button for instructions. Typically, you press and hold the pairing button on the base until an indicator light flashes, then power on the headset near the base.
Cisco 561 Headset with Base Station

Image 2.1: The Cisco 561 Headset placed on its standard base station, ready for charging and connection.

Video 2.1: An official video demonstrating the features and setup of the Cisco Headset 500 Series, which includes the 561 model.

3. Arahan Operasi

Understand how to use your Cisco 561 Headset for calls and audio.

  1. Memakai Alat dengar: Adjust the headband for a comfortable fit over your head. Position the microphone boom approximately two finger-widths from the corner of your mouth for optimal voice pickup. The headset is monaural, meaning it covers one ear.
  2. Hidupkan/Mati Kuasa: Press and hold the power button on the headset for a few seconds to turn it on or off. An audible prompt or indicator light will confirm the status.
  3. Menjawab / Menamatkan Panggilan: Press the Call Control button on the headset or base station to answer an incoming call or end an active call.
  4. Melaraskan Kelantangan: Use the volume up (+) and volume down (-) buttons on the headset or the volume dial on the base station to adjust listening volume.
  5. Mikrofon Diredam: Press the Mute button on the headset or base station to mute or unmute your microphone during a call. An indicator light on the microphone boom or base may show mute status.
  6. Out-of-Range Warning: If you move beyond the 300 ft operating range, you may hear an audible warning. Move closer to the base station to restore connection.
  7. Hayat Bateri: The headset provides up to 9 hours of talk time on a full charge. Place it on the base station when not in use to keep it charged.
Person wearing Cisco 561 Headset

Image 3.1: A user wearing the Cisco 561 Headset, demonstrating its comfortable fit for communication.

4. Penyelenggaraan

Penyelenggaraan yang betul memastikan ketahanan dan prestasi optimum alat dengar anda.

  • Pembersihan: Use a soft, dry, anti-static cloth to clean the headset and base station. Do not use liquid cleaners or aerosols directly on the device.
  • Storan: When not in use, store the headset on its base station to keep it charged and protected. Avoid storing in extreme temperatures or direct sunlight.
  • Penjagaan Bateri: For best battery life, avoid fully discharging the headset frequently. Charge it regularly, even if not completely depleted.
  • Kusyen Telinga: Periodically check ear cushions for wear and tear. Replacement cushions may be available from Cisco support.

5. Penyelesaian masalah

If you encounter issues with your Cisco 561 Headset, refer to the following common problems and solutions.

MasalahPenyelesaian yang Mungkin
Tiada bunyi dari set kepala
  • Pastikan set kepala dihidupkan dan dicas.
  • Verify the base station is properly connected to your device.
  • Semak tahap kelantangan pada kedua-dua set kepala dan peranti yang disambungkan.
  • Confirm the headset is paired with the base station.
Mikrofon tidak berfungsi
  • Pastikan mikrofon tidak diredamkan.
  • Check microphone position; it should be close to your mouth.
  • Verify the headset is selected as the input device in your computer's or phone's audio settings.
Alat dengar tidak berpasangan
  • Ensure both headset and base station are powered on.
  • Initiate the pairing process as described in Section 2.
  • Move the headset closer to the base station.
  • Restart both the headset and the base station.
Julat tanpa wayar terhad
  • Ensure there are no major obstructions (e.g., thick walls, large metal objects) between the headset and base station.
  • Avoid placing the base station near other wireless devices that may cause interference.
Alat dengar tidak dicas
  • Ensure the headset is correctly seated in the charging cradle.
  • Verify the base station's power adapter is securely connected and receiving power.
  • Check for any debris in the charging contacts on both the headset and base.

6. Spesifikasi

Key technical specifications for the Cisco 561 Wireless Mono Headset.

  • Nombor Model: CP-HS-WL-561-S-US
  • Teknologi Ketersambungan: Tanpa wayar
  • Teknologi Tanpa Wayar: DECT 6.0
  • Jarak Operasi Tanpa Wayar: Sehingga 300 kaki (91 meter)
  • Mod Suara: Mono
  • Maximum Frequency Response: 48 kHz
  • Peletakan Telinga: On Ear (Supra-aural)
  • Faktor Bentuk: Over-The-Head, Monaural
  • Jenis Mikrofon: Uni-Directional, Electret, Condenser
  • Jenis Kawalan: Call Control, Touch (on-ear controls)
  • Kawalan Bunyi: Pengasingan Bunyi
  • Purata Hayat Bateri: Masa bercakap sehingga 9 jam
  • Peranti Serasi: Cisco IP Phones with USB-A and/or RJ-9/AUX ports (e.g., 6851/6871/6900/7800/8800 models), Cisco Jabber/Webex devices/computers with USB-A ports
  • Berat Barang: 16 auns (lebih kurang 453 gram)
  • Bahan: Kulit (kusyen telinga)

7. Waranti dan Sokongan

Your Cisco 561 Wireless Mono Headset comes with a limited warranty. For detailed warranty information, please refer to the documentation included with your purchase or visit the official Cisco webtapak.

For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact Cisco customer support through their official channels. You can typically find support contact information on the Cisco webtapak atau dalam pembungkusan produk anda.

Penting: Keep your proof of purchase and product serial number handy when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.