Kebidumei USB 3.0 Sata HDD Adapter (5Gbps, 22Pin) User Manual

1. Pengenalan

Terima kasih kerana membeliasing the Kebidumei USB 3.0 SATA HDD Adapter. This adapter provides a convenient solution for connecting 2.5-inch and 3.5-inch SATA hard drives or SSDs to your computer via a USB 3.0 port, offering fast data transfer speeds of up to 5Gbps. It is designed for easy plug-and-play use, making data recovery, drive cloning, or external storage setup straightforward.

2. Maklumat Keselamatan

Jangan dedahkan penyesuai kepada kelembapan atau suhu yang melampau.
Elakkan daripada menjatuhkan atau meletakkan penyesuai kepada kesan yang kuat.
Ensure proper ventilation when in use, especially with 3.5-inch HDDs that may require external power.
Disconnect the adapter from the computer and power source (if applicable) before connecting or disconnecting a hard drive.
Use only the specified power adapter if one is required for 3.5-inch drives (power adapter not included with this specific model, typically for 2.5-inch drives).

3. Kandungan Pakej

1 x Kebidumei USB 3.0 to SATA HDD Adapter (5Gbps, 22Pin)

Note: Hard drives/SSDs and external power adapters (for 3.5" HDDs) are sold separately.

4. Persediaan

4.1 Menyambungkan Penyesuai

Follow these steps to connect your SATA hard drive or SSD to your computer using the Kebidumei USB 3.0 SATA HDD Adapter:

Ensure your computer is powered on and running.
Connect the 22-pin SATA connector of the adapter firmly to the SATA data and power ports on your 2.5-inch or 3.5-inch SATA hard drive/SSD.
If connecting a 3.5-inch HDD, connect an external 12V power adapter (not included) to the power input port on the SATA drive, if required by the drive. 2.5-inch drives typically draw sufficient power from the USB port.
Plug the USB 3.0 Type-A connector(s) of the adapter into an available USB 3.0 port on your computer. For optimal performance, use a USB 3.0 port (usually blue inside). If your adapter has two USB connectors, ensure both are plugged in for stable power delivery, especially for 2.5-inch drives.
Sistem pengendalian anda sepatutnya mengesan dan memasang pemacu yang diperlukan secara automatik. Pemacu akan muncul sebagai peranti storan baharu.

Kebidumei USB 3.0 SATA HDD Adapter with two USB-A connectors and one SATA 22-pin connector — Image: The Kebidumei USB 3.0 SATA HDD Adapter. It features a black plastic housing with a 22-pin SATA connector on one end, designed to connect directly to a SATA hard drive or SSD. Extending from the housing are two black cables, each terminating in a USB Type-A connector. One USB connector is typically for data and power, while the second (often marked for power only) provides additional power for drives that require it, such as some 2.5-inch HDDs or for more stable operation.

5. Arahan Operasi

5.1 Menggunakan Penyesuai

Once connected, the hard drive or SSD will be accessible through your computer's file explorer (Windows) or Finder (macOS). You can perform various operations:

Pemindahan Data: Seret dan lepas files to and from the connected drive. Enjoy fast transfer speeds thanks to USB 3.0.
sandaran: Use the drive for backing up important data.
Pengklonan: Utilize disk cloning software to duplicate an existing drive.
Pemulihan Data: Access data from old or non-booting drives.

5.2 Mengeluarkan Pemacu dengan Selamat

Always safely eject the drive before physically disconnecting the adapter from your computer to prevent data corruption:

Windows: Click the "Safely Remove Hardware and Eject Media" icon in the system tray, then select the drive to eject.
macOS: Drag the drive icon from the desktop to the Trash, or right-click the drive icon and select "Eject".

6. Penyelenggaraan

The Kebidumei USB 3.0 SATA HDD Adapter requires minimal maintenance:

Pembersihan: Lap penyesuai dengan kain lembut dan kering. Jangan gunakan pembersih cecair atau pelarut.
Storan: Simpan penyesuai di tempat yang sejuk dan kering jauh dari cahaya matahari langsung dan suhu yang melampau apabila tidak digunakan.
Penjagaan Kabel: Elakkan membengkokkan atau memusingkan kabel secara berlebihan untuk mengelakkan kerosakan dalaman.

7. Penyelesaian masalah

Masalah	Penyelesaian yang Mungkin
Pemacu tidak dikesan.	Pastikan semua sambungan selamat. Cuba port USB lain pada komputer anda. If using a 3.5-inch HDD, ensure the external power adapter is connected and working. Check Disk Management (Windows) or Disk Utility (macOS) to see if the drive is recognized but unformatted or unallocated. Try connecting the adapter to another computer to rule out system-specific issues.
Kelajuan pemindahan data yang perlahan.	Ensure the adapter is connected to a USB 3.0 port (blue port). Verify that your hard drive/SSD supports USB 3.0 speeds. Tutup aplikasi lain yang mungkin menggunakan sumber sistem.
Drive disconnects randomly.	Ensure sufficient power is supplied, especially for 2.5-inch HDDs that might need both USB connectors plugged in, or 3.5-inch HDDs requiring an external power adapter. Periksa sambungan yang longgar. Avoid using USB hubs if possible, or use a powered USB hub.

8. Spesifikasi

Ciri	Perincian
Nama Produk	Kebidumei USB 3.0 Sata HDD Adapter
Nombor Model	KBT000663
Antara muka	USB 3.0 (backward compatible with USB 2.0) to SATA 22Pin
Kadar Pemindahan Data	Up to 5 Gbps (USB 3.0 SuperSpeed)
Pemacu Serasi	2.5-inch / 3.5-inch SATA HDD/SSD
Keserasian Sistem Pengendalian	Windows, macOS, Linux (tanpa pemacu)
warna	Hitam
Jenis Penyambung	USB Jenis A
Jenis Kabel	USB

9. Waranti dan Sokongan

This Kebidumei product comes with a standard manufacturer's warranty. Please refer to the retailer's policy or the product packaging for specific warranty terms and duration.

For technical support, troubleshooting assistance, or warranty claims, please contact your point of purchase or visit the official Kebidumei website for contact information. When contacting support, please have your product model number (KBT000663) and purchase details ready.

Kebidumei is committed to providing high-quality products and customer satisfaction.

kebidumei KBT000663

Kebidumei USB 3.0 Sata HDD Adapter User Manual