pengenalan
The Armor3 "ReadyHub" 3-Port HD Switcher allows you to connect up to three HD game consoles or other HD devices to a single HD display, such as an HDTV or monitor. This device simplifies your setup by eliminating the need to constantly swap cables, providing a convenient way to switch between your connected devices with the push of a button or via the included remote control. It supports 4K resolution, ensuring high-quality video output.
Kandungan Pakej
Sila sahkan bahawa semua item terdapat dalam pakej anda:
- Armor3 "ReadyHub" 3-Port HD Switcher
- Alat Kawalan Jauh
- Power Adapter (typically included for active switchers)
Note: HD cables are not included and must be purchased separately.
Image: The Armor3 ReadyHub 3-Port HD Switcher shown in its retail packaging, highlighting its 4K and 3D compatibility.
Arahan Persediaan
Follow these steps to connect your Armor3 "ReadyHub" HD Switcher:
- Sambungkan Peranti Input: Plug your HD game consoles (e.g., Nintendo Switch, PS4, Xbox One, Wii U, Xbox 360) or other HD devices into the "INPUT 1", "INPUT 2", and "INPUT 3" ports on the HD Switcher using HD cables.
- Sambung ke Paparan: Connect one end of an HD cable to the "OUTPUT" port on the HD Switcher and the other end to an available HD input port on your HDTV or display.
- Sambungkan Kuasa: Plug the included power adapter into the "DC 5V" port on the HD Switcher, then plug the adapter into a standard electrical outlet. The power indicator light on the switcher should illuminate.
- Pilih Input: Turn on your HD display and select the corresponding HD input channel that the switcher is connected to.
Image: The Armor3 ReadyHub HD Switcher with HD cables connected to its input and output ports, alongside its remote control. This illustrates a typical setup configuration.
Arahan Operasi
Once connected, you can easily switch between your devices:
- Penukaran Manual: Press the "SELECT" button on the front of the HD Switcher to cycle through the connected input devices (Input 1, Input 2, Input 3). The corresponding LED indicator will light up to show the active input.
- Penukaran Kawalan Jauh: Use the included remote control to directly select the desired input. Press the "1", "2", or "3" button on the remote to switch to Input 1, Input 2, or Input 3 respectively.
Ensure that the device you wish to display is powered on for the switcher to detect its signal.
Penyelenggaraan
To ensure the longevity and optimal performance of your Armor3 "ReadyHub" HD Switcher:
- Pembersihan: Gunakan kain lembut dan kering untuk membersihkan bahagian luar peranti. Jangan gunakan pembersih cecair atau bahan kasar.
- Storan: Store the switcher in a cool, dry place away from direct sunlight and extreme temperatures.
- Pengendalian: Elakkan daripada menjatuhkan peranti atau terkena impak yang kuat.
Menyelesaikan masalah
If you encounter issues with your HD Switcher, please refer to the following common problems and solutions:
| Masalah | Penyelesaian |
|---|---|
| Tiada isyarat pada paparan. |
|
| Alat kawalan jauh tidak berfungsi. |
|
| Lampu penunjuk kuasa dimatikan. |
|
Spesifikasi
- model: M07385
- Input: 3 x HD (HDMI)
- Output: 1 x HD (HDMI)
- Resolusi yang Disokong: Sehingga 4K
- Keserasian: Nintendo Switch, PlayStation 4, Xbox One, Nintendo Wii U, Xbox 360, and other HD devices.
- Dimensi: 4.72 x 1.57 x 4.75 inci (12 x 4 x 12.06 cm)
- Berat: 3.2 auns (90.7 gram)
Waranti dan Sokongan
For warranty information or technical support, please contact Armor3 customer service. Details can typically be found on the product packaging or the official Armor3 webtapak. Sila simpan bukti pembelian anda untuk tuntutan waranti.
For further assistance, you may visit the manufacturer's webtapak atau hubungi saluran sokongan mereka.