SHARP KI-JX75-W

SHARP Humidifying Air Purifier Plasmacluster 25000 KI-JX75-W User Manual

Model: KI-JX75-W

pengenalan

This manual provides essential information for the safe and effective use of your SHARP KI-JX75-W Humidifying Air Purifier. This unit integrates SHARP's Plasmacluster 25000 technology for advanced air purification and humidification. Key features include Wide Speed Circulation Airflow, Effect Realization Mode, and a multi-filter system designed to capture odors and dust. It also offers a Plasmacluster Powerful Shot for targeted deodorization and sterilization of fabrics.

Persediaan

1. Membongkar dan Semakan Komponen

Carefully remove the air purifier from its packaging. Ensure all components are present and undamaged. Retain packaging for future transport or storage.

2. Garis Panduan Penempatan

  • Letakkan unit di permukaan yang rata dan stabil.
  • Maintain a distance of at least 30 cm from walls, furniture, and curtains to ensure optimal airflow.
  • Avoid placing near heat sources, direct sunlight, or areas with high humidity.
  • Ensure the power cord is not obstructed or placed where it can be tripped over.

3. Pemasangan Penapis

The unit comes with pre-installed filters. Before first use, open the back panel and remove any plastic bags or protective films from the filters. Reinstall the filters in the correct order: Pre-filter, Deodorizing filter, and Electrostatic HEPA filter. Ensure they are securely in place.

Diagram showing the filter cleaning mechanism and filter components.

Imej: Dalaman view showing the pre-filter, deodorizing filter, and electrostatic HEPA filter. The diagram illustrates the power brush for dust collection and the W-scratcher for efficient dust recovery from the pre-filter.

4. Water Tank Filling (for Humidification)

  • Keluarkan tangki air dari unit.
  • Open the water supply cap and fill the tank with clean tap water. Do not use hot water, chemicals, or aromatic oils.
  • Securely close the cap and reinsert the water tank into the unit until it clicks into place.

Arahan Operasi

1. Hidupkan/Mati Kuasa

Connect the power cord to an electrical outlet. Press the kuasa butang untuk menghidupkan atau mematikan unit.

2. Pemilihan Mod

Gunakan Mod button to cycle through available operation modes:

  • Mod Pembersihan Udara: Standard air cleaning.
  • Humidifying Air Purification Mode: Air cleaning with added humidification.
  • Plasmacluster Powerful Shot: Releases high-density Plasmacluster ions to deodorize and sterilize attached odors on items like sofas and carpets.
  • Effect Realization Mode: Intelligently controls airflow based on sensor readings to optimize purification.
  • Mod Haiwan Peliharaan: Optimized operation for households with pets, focusing on pet odor deodorization.
Diagram showing Plasmacluster Powerful Shot operation for pet odor deodorization.

Image: Illustration of Plasmacluster Powerful Shot operation, demonstrating its reach to deodorize pet toys and pet areas.

3. Pelarasan Kelajuan Kipas

Tekan ke Kelajuan Kipas button to select desired fan intensity (e.g., Silent, Medium, High, Auto).

4. COCORO AIR Smart Features

This unit supports COCORO AIR, an AI-powered system that learns your usage patterns and optimizes the air environment. It can be linked with smart speakers for voice control. A wireless LAN access point and a dedicated smartphone app are required for these features.

Diagram illustrating the COCORO AIR system with cloud AI, optimizing operation based on indoor and outdoor air information.

Image: Diagram showing the COCORO AIR system, where cloud AI collects and analyzes operational status, indoor air information, and outdoor air forecasts to optimize the unit's performance.

Penyelenggaraan

Penyelenggaraan tetap memastikan prestasi optimum dan jangka hayat pembersih udara anda.

1. Pembersihan Pra-penapis

  • The pre-filter automatically collects dust into a dust box.
  • Periodically check and empty the dust box.
  • For thorough cleaning, remove the pre-filter and use a vacuum cleaner or soft brush to remove accumulated dust.

2. Deodorizing and HEPA Filter Cleaning/Replacement

  • These filters are not washable.
  • Clean the surface of the filters with a vacuum cleaner to remove dust.
  • Replace these filters approximately every 10 years, or sooner depending on usage and air quality. Refer to the indicator lights for replacement timing.
Diagram showing the three-filter system: Electrostatic HEPA filter, Deodorizing filter, and Dust-blocking Pre-filter.

Image: Cross-section diagram illustrating the three-filter system: Electrostatic HEPA filter, Gas-removing Deodorizing filter, and Dust-blocking Pre-filter, designed to capture particles as small as 0.3μm.

3. Humidifying Filter and Water Tank Cleaning

  • Clean the water tank and humidifying filter regularly to prevent mold and bacteria growth.
  • Remove the humidifying filter and wash it gently with water. For stubborn deposits, soak in a mild citric acid solution.
  • Wipe the inside of the water tank with a soft cloth.

4. Pembersihan Luaran

Wipe the exterior of the unit with a soft, dry cloth. For stubborn dirt, use a cloth dampdisapu dengan air dan detergen lembut, kemudian lap kering.

Menyelesaikan masalah

Sebelum menghubungi sokongan pelanggan, sila rujuk isu dan penyelesaian biasa berikut:

MasalahKemungkinan PuncaPenyelesaian
Unit tidak dihidupkan.Kord kuasa tidak disambungkan dengan betul.Pastikan kord kuasa dipasang dengan selamat pada soket dan unit.
Weak airflow or poor purification.Penapis kotor atau tersumbat.Clean or replace the filters as described in the Maintenance section.
Humidification not working.Water tank is empty or humidifying filter is dirty.Refill the water tank. Clean the humidifying filter.
Unusual odors from the unit.Filters need cleaning or replacement.Clean or replace the deodorizing filter and HEPA filter. Ensure the water tank and humidifying filter are clean.
Unit bising.Operating at high fan speed.Select a lower fan speed setting. Ensure the unit is on a stable surface.

Spesifikasi

CiriSpesifikasi
Nombor ModelKI-JX75-W
warnaputih
Dimensi (D x W x H)31.6 cm x 40.5 cm x 66.6 cm
Berat Barang12 kg
Sumber KuasaElektrik Bertali
Penggunaan KuasaMax approx. 80W
Kaedah PenyucianPlasmacluster 25000 airborne purification & filter purification
Kapasiti Pelembapan750 ml/j
Humidifying Air Purification Applicable Floor AreaApprox. 28 tatami mats
Air Purification Applicable Floor AreaApprox. 34 tatami mats
Purification Time (for 8 tatami mats)9 minutes (during air purification operation)
Tahap Kebisingan53 dB (maksimum)
Panjang Kord Kuasa1.8 m
Ciri KhasHumidification function, Plasmacluster 25000, Automatic filter cleaning, AI control (COCORO AIR)
Image of the SHARP KI-JX75-W air purifier with dimensions labeled.

Imej: Depan view of the SHARP KI-JX75-W air purifier with its height (66.6cm), width (40.5cm), and depth (31.6cm) indicated.

Waranti dan Sokongan

For warranty information, please refer to the warranty card included with your product or visit the official SHARP website. For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact SHARP customer service. Contact details can typically be found on the SHARP official webtapak atau dalam pembungkusan produk.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.