1. Produk Lebihview
The deleyCON 12V SLIM LED Power Supply Unit (Model MK3212) is a compact and efficient solution for powering various 12V DC LED lighting applications. Its slim design allows for easy integration into tight spaces, providing stable and flicker-free illumination.
Ciri-ciri Utama:
- Reka bentuk Slim: Particularly small and flat for discreet installation.
- Output Tetap Voltage: Ensures uniform and flicker-free light.
- Keserasian Luas: Suitable for LED lights, LED strips, G4, MR11, and MR16 lamps.
- Perlindungan Keselamatan: Built-in protection against overload, overheating, and short circuits.
- Sambungan Selari: Supports parallel connection of multiple LED loads.
2. Spesifikasi
| Spesifikasi | Nilai |
|---|---|
| Nombor Model | MK3212 |
| Input Voltage | 200 - 240 Volts AC (Alternating Current) / 50/60 Hertz |
| Input Arus (Maks) | Kurang daripada 230 mA |
| Keluaran Voltage | 12 Volts DC (Direct Current) |
| Arus Keluaran (Maks) | 1.67 Amperes |
| Beban Maksimum | 20 Watt |
| Kelas Perlindungan | IP20 |
| Dimensi (L x W x H) | 103 x 35.5 x 16 mm (4.06 x 1.40 x 0.63 inci) |
| Berat badan | Lebih kurang 52 g (1.83 oz) |
| Kabel Input | H03VVH2-F 2x 0.75 mm² |
| Kabel Output | H03VVH2-F 2x 0.75 mm² |
3. Maklumat Keselamatan
WARNING: Electrical shock hazard. Installation should only be performed by a qualified electrician or competent person. Always disconnect power before installation or servicing.
- Pastikan input voltage (200-240V AC) matches your mains supply.
- Do not exceed the maximum load of 20 watts. Overloading can damage the unit and connected LEDs.
- The unit is rated IP20, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Install in a dry environment.
- Pastikan pengudaraan yang betul di sekeliling unit untuk mengelakkan terlalu panas.
- Jangan buka casing of the power supply unit. There are no user-serviceable parts inside.
- Use appropriate wiring and connectors that comply with local electrical codes.
4. Persediaan dan Pemasangan
Follow these steps for safe and correct installation of your deleyCON LED Power Supply Unit:
- Putuskan Kuasa: Before starting any electrical work, ensure the main power supply to the circuit is turned off at the breaker or fuse box. Verify with a voltage penguji.
- Sediakan Pendawaian: Strip approximately 5-7mm of insulation from the ends of your input (AC) and output (DC) wires.
- Connect Input (AC): Connect the mains AC wires to the input terminals labeled 'N' (Neutral) and 'L' (Live) on the power supply unit. Ensure a secure connection.
- Connect Output (DC): Connect your 12V DC LED lights or strips to the output terminals labeled '+' (Positive) and '-' (Negative). Observe correct polarity.
- Sambungan Selamat: Ensure all wire connections are tight and secure to prevent loose contacts and potential hazards.
- Pemasangan: Place the power supply unit in a suitable, dry location, ensuring adequate ventilation. The slim design allows for installation in confined spaces.
- Pulihkan Kuasa: Once all connections are made and secured, restore power to the circuit. The connected LEDs should illuminate.
5. Arahan Operasi
The deleyCON 12V SLIM LED Power Supply Unit operates automatically once correctly installed and powered. It provides a constant 12V DC output to your connected LED lights.
- Pastikan jumlah wattage of all connected LED lights does not exceed 20 watts.
- The unit is designed for continuous operation within its specified parameters.
- If the LEDs flicker or do not light up, refer to the Troubleshooting section.
6. Penyelenggaraan
The deleyCON LED Power Supply Unit requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:
- Pembersihan: Ensure the unit is disconnected from power before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- Pengudaraan: Periodically check that the ventilation areas around the unit are not obstructed by dust or debris.
- Sambungan: Occasionally inspect the wiring connections to ensure they remain secure. Only do this with power disconnected.
- Persekitaran: Ensure the operating environment remains dry and within acceptable temperature ranges.
7. Penyelesaian masalah
If you encounter issues with your deleyCON LED Power Supply Unit, refer to the following table:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| LED tidak menyala | No power supply to the unit | Check mains power, circuit breaker, and input wiring connections. |
| Incorrect wiring (e.g., reversed polarity) | Verify output wiring (+ to + and - to -) to LEDs. | |
| Faulty LED or LED strip | Test the LED with another known good 12V DC power source if possible. | |
| LED berkelip atau malap | Overload (total wattage exceeds 20W) | Kurangkan bilangan atau wattage of connected LEDs. |
| Sambungan longgar | Disconnect power and re-secure all wiring connections. | |
| Unit terlalu panas | Ensure adequate ventilation around the unit. Reduce load if necessary. | |
| Unit terasa panas | Normal operation (some heat is expected) | Ensure proper ventilation. If excessively hot, check for overload. |
| Lebihan beban atau litar pintas | Disconnect power immediately. Check for short circuits in wiring or LEDs. Reduce load. |
If the problem persists after attempting these solutions, contact deleyCON customer support.
8. Waranti dan Sokongan
This deleyCON product is designed for reliability and performance. For information regarding warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official deleyCON website. In case of technical issues or questions not covered in this manual, please contact deleyCON customer support.
Polisi Pemulangan: This product is subject to a 30-day return/replacement policy from the date of purchase, as per standard retail terms.