Utilitech 38971

Utilitech 36-in Under Cabinet LED Light Bar Instruction Manual

Model: 38971 | Brand: Utilitech

pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of your Utilitech 36-inch Under Cabinet LED Light Bar. Please read this manual thoroughly before installation and keep it for future reference. This LED light bar is designed to provide efficient and warm white illumination for your indoor spaces, particularly under cabinets.

Maklumat Keselamatan

Sila patuhi langkah keselamatan berikut untuk mengelakkan kecederaan atau kerosakan pada produk:

  • Always disconnect power at the circuit breaker before installation, servicing, or cleaning.
  • Produk ini bertujuan untuk kegunaan dalaman sahaja. Jangan dedahkan kepada air atau lembapan.
  • Ensure all electrical connections comply with local codes and ordinances. If you are unsure, consult a qualified electrician.
  • Do not attempt to modify or disassemble the light fixture. There are no user-serviceable parts inside.
  • Avoid looking directly into the LED light source when it is illuminated, as it may cause eye strain.
  • Jauhkan bahan pembungkus daripada kanak-kanak.

Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:

  • Utilitech 36-inch Under Cabinet LED Light Bar (1)
  • Alat kawalan jauh (1)
  • Perkakasan Pemasangan (skru, sauh)
  • Manual Arahan (dokumen ini)
Utilitech 36-inch Under Cabinet LED Light Bar

Image: The Utilitech 36-inch Under Cabinet LED Light Bar, showing its slim profile dan kemasan putih.

Persediaan dan Pemasangan

The Utilitech LED Light Bar is designed for semi-flush under-cabinet mounting. Follow these steps for proper installation:

  1. Sediakan Kawasan Pemasangan: Choose a suitable location under a cabinet. Ensure there is a power outlet nearby for the corded electric connection. Clean the mounting surface.
  2. Tandakan Titik Pelekap: Hold the light bar in the desired position and mark the locations for the mounting screws. Use a pencil to mark through the mounting holes on the fixture.
  3. Gerudi Lubang Juruterbang: Using an appropriate drill bit for your cabinet material, drill pilot holes at the marked locations. If mounting into drywall, use the provided wall anchors.
  4. Secure the Light Bar: Align the light bar with the pilot holes and secure it using the provided mounting screws. Ensure the fixture is firmly attached and level.
  5. Sambung ke Kuasa: Plug the light bar's power cord into a standard 110-volt electrical outlet.

Nota: For a clean installation, consider routing the power cord discreetly using cable clips (not included) or by drilling a small hole through the cabinet if permissible and safe.

Arahan Operasi

Your Utilitech LED Light Bar is controlled via the included remote control.

  • Hidupkan/Mati Kuasa: Tekan ke ON button on the remote to turn the light bar on. Press the DIMATIKAN butang untuk mematikannya.
  • Pelarasan Kecerahan: Gunakan + dan - buttons on the remote to increase or decrease the brightness of the light. The light bar provides up to 800 lumens of warm white light.
  • Julat Kawalan Jauh: Ensure the remote control is pointed towards the light bar for optimal signal reception. The effective range may vary depending on obstacles.

Penyelenggaraan

The Utilitech LED Light Bar requires minimal maintenance.

  • Pembersihan: Before cleaning, ensure the light bar is unplugged from the power outlet. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as they may damage the finish.
  • Sumber Lampu LED: The LED light source is integrated and non-removable. It is designed for long-lasting performance and does not require bulb replacement.

Menyelesaikan masalah

Jika anda menghadapi masalah dengan bar cahaya anda, rujuk masalah dan penyelesaian biasa berikut:

MasalahKemungkinan PuncaPenyelesaian
Bar lampu tidak menyala.
  • Tiada kuasa ke saluran keluar.
  • Bateri kawalan jauh mati.
  • Remote control not paired or faulty.
  • Check the power outlet and circuit breaker.
  • Gantikan bateri kawalan jauh.
  • Ensure remote is pointed at the light bar. If issues persist, contact customer support.
Cahaya malap atau berkelip.
  • Tetapan kecerahan adalah rendah.
  • Sambungan kuasa longgar.
  • Tingkatkan kecerahan menggunakan alat kawalan jauh.
  • Pastikan kord kuasa dipasang dengan selamat.
Alat kawalan jauh tidak bertindak balas.
  • Bateri mati atau dipasang dengan salah.
  • Obstruction between remote and light bar.
  • Replace battery and check polarity.
  • Keluarkan sebarang halangan.

Spesifikasi

CiriPerincian
JenamaUtilitech
Nombor Model38971
Dimensi Produk36.5 x 3.25 x 1.5 inci
Berat Barang2.2 paun
Sumber KuasaElektrik Bertali
Voltage110 Volt
Wattage9.21 watt
Kecerahan800 lumen
Warna CerahPutih Hangat
Jenis Sumber CahayaLED (Non-Removable)
Kaedah KawalanAlat Kawalan Jauh
Jenis PemasanganSemi Flush Mount / Under Cabinet
Penggunaan Dalaman/LuarDalaman
Jenis SelesaiDisikat
Bahan Teduhlogam
Perhimpunan DiperlukanTidak

Maklumat Waranti

This Utilitech product comes with a limited warranty. Please refer to the warranty card included with your product packaging for specific terms, conditions, and duration of the warranty. Keep your purchase receipt as proof of purchase for any warranty claims.

Sokongan Pelanggan

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Utilitech customer support. Contact information can typically be found on the product packaging or the manufacturer's official webtapak.

Pengeluar: Utilitech

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.