M-Wave TW-3/10 Torque Wrench User Manual

pengenalan

The M-Wave TW-3/10 Torque Wrench is a precision tool designed for applying specific torque values to fasteners, primarily for bicycle components. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your torque wrench.

This M-Wave Torque wrench scales from 3 - 10 Nm. It comes with allen key sizes of 2, 3, 4, 5, and 6 mm. It also comes with a T25 Star screwdriver bit and a philips screwdriver bit.

Image: The M-Wave TW-3/10 Torque Wrench, showcasing the main unit and the assortment of included bits.

Persediaan

Before using your M-Wave TW-3/10 Torque Wrench, ensure all components are present and in good condition. The wrench comes with a selection of interchangeable bits for various fastener types.

1. Buka Bungkus Sepana: Carefully remove the torque wrench and all included bits from their packaging.
2. Periksa Komponen: Check the wrench body and all bits for any signs of damage or wear. Do not use if any part appears damaged.
3. Identify Bits: Familiarize yourself with the different bit types and sizes:
   • Allen Key Sizes: 2mm, 3mm, 4mm, 5mm, 6mm
   • Star Screwdriver Bit: T25
   • Bit Pemutar Skru Philips
4. Pilih Bit Betul: Choose the appropriate bit for the fastener you intend to tighten.
5. Masukkan Bit: Firmly insert the selected bit into the hexagonal receiver at the end of the torque wrench. Ensure it is fully seated and secure.

Imej: A terperinci view of the various bits included with the M-Wave torque wrench, showing their different shapes and sizes.

Arahan Operasi

The M-Wave TW-3/10 Torque Wrench is designed for precise torque application within its specified range. Always refer to the manufacturer's recommended torque settings for the component you are working on.

1. Tentukan Tork yang Diperlukan: Identify the correct torque specification (in Newton-meters, Nm) for the fastener you are tightening. This information is usually found in the component's manual or on the component itself.
2. Set the Torque Value: The M-Wave TW-3/10 has a fixed torque range of 3-10 Nm. The wrench is designed to click or give a tactile indication when the set torque is reached. The scale on the wrench indicates the approximate torque setting. Ensure you are within the 3-10 Nm range.
3. Letakkan Sepana: Place the bit firmly into the head of the fastener. Ensure the wrench is perpendicular to the fastener to avoid stripping.
4. Guna Daya: Apply slow, steady, and increasing force to the handle of the torque wrench. Do not use sudden jerks or excessive force.
5. Listen for the Click: Continue applying force until you feel and/or hear a distinct "click" or break in the wrench's movement. This indicates that the preset torque value has been reached.
6. Stop Immediately: Once the click is felt/heard, stop applying force immediately. Do not continue to tighten the fastener beyond this point, as over-tightening can damage components or the wrench itself.
7. Remove the Wrench: Carefully remove the torque wrench from the fastener.

Image: A hand demonstrating the use of the M-Wave torque wrench to tighten a bolt on a bicycle stem, illustrating proper application.

Nota Keselamatan Penting:

• Always use the correct bit size for the fastener.
• Never use the torque wrench as a breaker bar or for loosening fasteners.
• Do not exceed the maximum torque rating of 10 Nm.
• Keep the wrench clean and free from dirt or debris.

Penyelenggaraan

Proper maintenance will extend the life and accuracy of your M-Wave TW-3/10 Torque Wrench.

• Pembersihan: After each use, wipe down the wrench with a clean, dry cloth to remove any dirt, grease, or moisture. Do not use harsh chemicals or abrasive cleaners.
• Storan: Store the torque wrench in a clean, dry place, away from extreme temperatures and humidity. It is recommended to store it in its original packaging or a protective case to prevent damage.
• Penjagaan Bit: Keep the bits clean and organized. If any bits show signs of wear or damage (e.g., rounded edges), replace them to prevent fastener damage.
• Penentukuran: Torque wrenches are precision instruments and may require periodic calibration to maintain accuracy. Consult M-Wave's official support channels for information on recommended calibration intervals and services.

Menyelesaikan masalah

If you encounter issues with your M-Wave TW-3/10 Torque Wrench, consider the following common problems and solutions:

For issues not covered here, please contact M-Wave customer support.

Spesifikasi

Key specifications for the M-Wave TW-3/10 Torque Wrench:

Waranti dan Sokongan

For warranty information, product support, or to inquire about service and calibration, please refer to the official M-Wave webtapak atau hubungi terus bahagian perkhidmatan pelanggan mereka. Simpan bukti pembelian anda untuk sebarang tuntutan waranti.

You can visit the M-Wave store for more information: M-Wave Official Store