CGOLDENWALL YFX-611 Automatic SMD/SMT Component Counter User Manual

1. Pengenalan

The CGOLDENWALL YFX-611 is an automatic SMD/SMT component counting machine designed for efficient and accurate counting of surface-mount device components on reels. This device features leak detection, forward and backward counting capabilities, and a built-in memory for presetting count quantities. Its user-friendly interface and robust design ensure reliable performance in various industrial and scientific applications.

2. Maklumat Keselamatan

Please read and understand all safety instructions before operating the YFX-611 component counter. Failure to follow these instructions may result in injury or damage to the equipment.

• Pastikan bekalan kuasa voltage matches the machine's requirements (AC110V/220V, 50/60Hz).
• Jangan kendalikan mesin dalam keadaan basah atau damp syarat.
• Jauhkan tangan dan pakaian longgar daripada bahagian yang bergerak semasa operasi.
• Putuskan sambungan kuasa sebelum melakukan sebarang penyelenggaraan atau pembersihan.
• Only use authorized replacement parts and accessories.
• Do not attempt to modify the machine.

3. Produk Lebihview

The CGOLDENWALL YFX-611 component counter is designed for ease of use and precision. Familiarize yourself with the main components shown below.

Rajah 3.1: Depan view of the CGOLDENWALL YFX-611 Automatic SMD/SMT Component Counter. This image displays the main unit with two reel holders, the control panel, and the component feeding mechanism.

Rajah 3.2: Atas ke bawah view of the YFX-611, highlighting the LCD screen, keypad, power switch, and the two reel spindles for component tape. The central component feeding area is also visible.

Komponen Utama:

• Skrin LCD: Displays counting information, settings, and operational status.
• Pad kekunci: Used for inputting settings, controlling operations, and navigating menus.
• Reel Holders: Spindles on either side for mounting SMD component reels.
• Component Feeding Mechanism: Area where the component tape passes through for counting.
• Suis kuasa: Mengawal kuasa utama kepada unit.
• Membawa pemegang: Pemegang bersepadu untuk kebolehgunaan.

4. Persediaan

Follow these steps to set up your CGOLDENWALL YFX-611 component counter for initial use.

4.1 Membongkar dan Meletakkan

• Keluarkan mesin dari pembungkusannya dengan berhati-hati.
• Letakkan mesin di atas permukaan yang stabil dan rata di kawasan yang mempunyai pengudaraan yang baik.
• Ensure adequate space around the machine for reel placement and operation.

4.2 Sambungan Kuasa

• Verify that the machine's voltage setting matches your local power supply. The machine supports AC110V/220V, 50/60Hz.
• Connect the provided power cord to the machine's power input and then to a grounded electrical outlet.

4.3 Installing Reel Pallets

The machine requires the installation of reel pallets to hold the component tapes securely. Refer to the visual guide below for proper installation.

Rajah 4.1: Visual instructions for installing the reel pallets. This sequence of six images demonstrates how to attach the pallet base, secure it, and then place the reel onto the spindle for counting.

1. Langkah 1-3: Attach the pallet support arm to the side of the machine using the provided Allen wrench. Ensure it is securely fastened.
2. Langkah 4: Place the empty reel pallet onto the spindle of the support arm.
3. Langkah 5: Secure the pallet in place, typically by tightening a knob or locking mechanism.
4. Langkah 6: Repeat for the other side if using two reels (one for source, one for take-up).

5. Operasi

This section details the operational procedures for the YFX-611 component counter.

5.1 Loading Component Reels

• Mount the SMD component reel onto one of the reel holders.
• Thread the component tape through the counting mechanism, ensuring it is properly aligned.
• Attach the leading end of the tape to an empty take-up reel on the other reel holder.

5.2 Basic Counting

• Turn on the power switch. The LCD screen will illuminate.
• Use the keypad to select the desired counting mode (e.g., continuous count, preset count).
• Press the START button to begin counting. The machine will automatically feed the tape and display the count on the LCD.
• To stop counting, press the STOP button.

5.3 Ciri Lanjutan

• Pengesanan Kebocoran: The machine is equipped with a leak detection feature. If an empty slot on the component tape is detected, the machine will automatically stop, preventing inaccurate counts.
• Forward and Backward Counting: The YFX-611 can count components in both forward and backward directions, allowing for double-checking and ensuring accuracy. Refer to the keypad for directional controls.
• Preset Count Quantity: Utilize the built-in memory to preset a target count quantity. The machine will automatically stop once the preset number of components has been counted. Instructions for setting the preset count are typically found in the on-screen menu accessed via the keypad.
• Tape Protection: The design minimizes the risk of tape dropping, protecting both the components and the tape reels during operation.

6. Penyelenggaraan

Regular maintenance ensures the longevity and optimal performance of your YFX-611 component counter.

• Pembersihan: Periodically clean the machine's exterior with a soft, dry cloth. For the counting mechanism, use a soft brush or compressed air to remove dust and debris. Ensure the power is off and unplugged before cleaning.
• Pemeriksaan: Regularly inspect the reel holders, tape path, and power cord for any signs of wear or damage.
• Storan: Apabila tidak digunakan, simpan mesin di persekitaran yang bersih dan kering, jauh daripada cahaya matahari langsung dan suhu yang melampau.

7. Penyelesaian masalah

This section provides solutions to common issues you might encounter with the YFX-611 component counter.

Isu dan Penyelesaian Biasa:

• Mesin tidak boleh dihidupkan:
  • Periksa sama ada kord kuasa disambungkan dengan selamat ke kedua-dua mesin dan alur keluar kuasa.
  • Sahkan bahawa salur keluar kuasa berfungsi.
  • Pastikan suis kuasa berada dalam kedudukan "ON".
• Counting is inaccurate:
  • Ensure the component tape is properly threaded through the counting mechanism and aligned.
  • Clean the counting sensor area to remove any dust or obstructions.
  • Check if the tape pitch setting (if adjustable) matches the component tape being used.
• Machine stops unexpectedly during counting:
  • This may be due to the leak detection feature. Check the component tape for empty slots.
  • Ensure the tape is not jammed or obstructed.
  • Verify that the take-up reel is not full or jammed.
• Papan kekunci tidak responsif:
  • Turn the machine off and then on again to reset the system.
  • Pastikan tiada objek asing yang tersekat di bawah kunci.

Jika anda menghadapi masalah yang tidak disenaraikan di sini atau jika penyelesaian yang dicadangkan tidak menyelesaikan masalah, sila hubungi sokongan pelanggan.

8. Spesifikasi

The following table outlines the technical specifications for the CGOLDENWALL YFX-611 Automatic SMD/SMT Component Counter.

Rajah 8.1: Detailed specifications for the component counter, including capacity, power, counting volume, and reel dimensions.

9. Waranti dan Sokongan

For technical assistance, warranty claims, or service inquiries, please contact CGOLDENWALL customer support. Refer to your purchase documentation for specific warranty terms and contact details.

Polisi Pemulangan: The product typically includes a 30-day return policy for refund or replacement, as per standard retail terms.

Pengeluar: CGOLDENWALL

Nombor Model: YFX-611 (Part Number: XQ 85 2)