ZHENDUO 180705

ZHENDUO Baby Bath Bubble Crab Instruction Manual

Model: 180705

Brand: ZHENDUO

1. Arahan Persediaan

Follow these steps to set up your ZHENDUO Baby Bath Bubble Crab:

  1. Buka bungkus Mainan: Carefully remove the bubble crab from its packaging.
  2. Sediakan Permukaan Pemasangan: Wipe the wall clean where you intend to fix the bubble crab. Ensure the surface is dry and smooth to allow the suction cups to adhere properly.
  3. Pasang Cawan Penyedut: Press the bubble crab firmly against the clean wall using its strong suction cups. Ensure there is no air leakage for a secure attachment.
  4. Pasang Bateri: Open the battery compartment and insert 2 AA batteries. Ensure correct polarity.
  5. Sediakan Penyelesaian Buih: Mix your chosen baby shower gel with water to create the bubble solution. The ratio can be adjusted for desired bubble consistency.
  6. Fill Bubble Container: Place the prepared bubble solution into the designated container on the bubble crab.

Setup Visual Guide

Intact bubble crab toy
Image: The ZHENDUO Baby Bath Bubble Crab in its intact form, ready for setup.
Detaching the bubble solution container
Image: Instructions showing how to detach the bubble solution container for filling.
Suction cups on the back of the crab toy
Imej: View of the strong suction cups on the back of the crab toy for secure wall mounting.

2. Arahan Operasi

The ZHENDUO Baby Bath Bubble Crab offers multiple functions to enhance bath time:

  • Bubble Maker: Once the bubble solution is loaded and batteries are installed, turn on the device to start blowing bubbles from the crab's mouth.
  • Pemain muzik: The toy features 12 classical nursery rhymes. These will play automatically when the device is turned on, creating a cheerful atmosphere.
  • Bath Toy: Designed to be a fun companion during bath time, encouraging engagement and enjoyment.

To operate, simply press the ON/OFF switch located on the crab. The device will begin blowing bubbles and playing music simultaneously.

Operation Visual Guide

Pressing the ON/OFF switch on the crab toy
Image: Location of the ON/OFF switch on the bubble crab for activation.
Baby Bath Bubble Crab blowing bubbles into a bathtub
Image: The bubble crab actively blowing bubbles into a bathtub, creating a fun environment.

Video Demonstrasi

Video: A demonstration of the bubble bath toy in action, showing bubble generation.

Video: Tayangan video produk rasmicasing the ZHENDUO Baby Bath Bubble Crab's features and operation.

3. Penyelenggaraan

To ensure the longevity and proper functioning of your bubble crab toy:

  • Pembersihan: After each use, wipe the toy with a dry cloth to remove any soap residue or moisture.
  • Penjagaan Bateri: Jika mainan itu tidak akan digunakan untuk tempoh yang lama, tanggalkan bateri untuk mengelakkan kebocoran dan kakisan.
  • Storan: Store the toy in a dry place away from direct sunlight.

4. Penyelesaian masalah

If you encounter issues with your ZHENDUO Baby Bath Bubble Crab, refer to the following common problems and solutions:

MasalahKemungkinan PuncaPenyelesaian
Toy does not turn on or produce bubbles/music.
  • Bateri lemah atau mati.
  • Pemasangan bateri yang salah.
  • No bubble solution or incorrect mixture.
  • Gantikan dengan bateri AA yang baru.
  • Periksa kekutuban bateri dan masukkan semula dengan betul.
  • Ensure the bubble solution container is filled with the correct mixture of baby shower gel and water.
Suction cups do not stick to the wall.
  • Wall surface is not clean or dry.
  • Air leakage in suction cups.
  • Clean and dry the wall surface thoroughly before attaching.
  • Press firmly to remove all air from under the suction cups.
Bubbles are weak or not forming.
  • Insufficient bubble solution.
  • Incorrect soap-to-water ratio.
  • Internal components (e.g., yellow piece) dislodged.
  • Refill the bubble solution container.
  • Adjust the mixture; try a slightly higher concentration of baby shower gel.
  • Check if the internal yellow piece is properly seated.
Bubble solution leaks from the bottom.
  • Container not properly sealed.
  • Overfilling the container.
  • Ensure the bubble solution container is securely attached and sealed.
  • Do not overfill the container; fill only to the recommended level.

5. Spesifikasi

CiriPerincian
Nama JenamaZHENDUO
Nombor Model180705
UPC741025361614
Jenis Bahanplastik
warnamerah
Bentuk BarangKetam
Dimensi Item L x W x H9.5"L x 2.8"W x 6"H
Sumber KuasaDikuasakan Bateri
Bilangan Bateri2 bateri AA diperlukan (tidak termasuk)
Penerangan Julat UmurKid, Infant (Manufacturer Minimum Age: 36 months)
Komponen yang DisertakanToy Body
Ciri-ciri TambahanMusical Bubble Blower (12 Classical Nursery Rhymes)

6. Waranti & Sokongan

Specific warranty information for the ZHENDUO Baby Bath Bubble Crab is not provided in the product details. For any warranty claims, product support, or inquiries, please contact the manufacturer directly.

Pengeluar: chenghairuixing Toy Factory

For further assistance, please refer to the product listing on Amazon or contact ZHENDUO customer service.

7. Maklumat Keselamatan

  • Always supervise children during bath time, especially when using bath toys.
  • Ensure the bubble crab is securely attached to the wall to prevent it from falling into the water.
  • Use only non-toxic, baby-safe bubble solution or baby shower gel.
  • Do not submerge the entire toy in water, as it is battery-operated and not fully waterproof.
  • Jauhkan bateri daripada kanak-kanak.

© 2023 ZHENDUO. All rights reserved.

Manual ini adalah untuk tujuan maklumat sahaja. Spesifikasi produk tertakluk kepada perubahan tanpa notis.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.