Bauer 7.5 Amp Manual Pengguna Penggilap DA Orbit Rawak Lontaran Jauh 6 inci

1. Pengenalan

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Bauer 7.5 Amp 6 in. Long-Throw Random Orbit DA Polisher. Please read this manual thoroughly before initial use and retain it for future reference.

The 6-inch, 20mm long-throw random orbit dual action polisher is designed to efficiently remove moderate to severe defects from surfaces without leaving buffer trails.

Ciri-ciri Utama:

• 20mm long-throw dual-action random orbit for efficient defect removal.
• Electronic speed controller for consistent speed under load.
• High-performance 7.5A motor with soft start for smooth operation and extended gear life.
• Trigger grip handle for enhanced control, reach, and leverage.
• Ergonomic rubberized front handle for comfort and precise control.
• Replaceable brushes for prolonged tool lifespan.
• All-metal gear construction for durability.

2. Maklumat Keselamatan

Always follow basic safety precautions when using electrical tools to reduce the risk of fire, electric shock, and personal injury. Keep work area clean and well-lit. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Keep children and bystanders away while operating a power tool.

Wear appropriate personal protective equipment, including eye protection, hearing protection, and gloves. Ensure the power cord is not damaged and avoid accidental starting. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools.

3. Komponen dan Lebihview

Image: The Bauer 7.5 Amp 6 inch Long-Throw Random Orbit DA Polisher, showcasing its red and black ergonomic design with the backing pad visible.

The polisher consists of a main motor housing, an ergonomic trigger grip handle, a rubberized front handle, a speed control dial, and a 6-inch hook and loop backing pad. Familiarize yourself with all parts before operation.

4. Persediaan

1. Membongkar: Carefully remove the polisher and all accessories from the packaging. Inspect for any damage that may have occurred during shipping.
2. Pad Attachment: Ensure the included Premium 6 in. Bauer hook and loop backing pad is securely attached to the polisher. Align the pad with the spindle and press firmly to engage the hook and loop fasteners.
3. Lampiran Aksesori: Attach the desired polishing pad (foam or wool, sold separately) to the hook and loop backing pad. Ensure it is centered and securely fastened.
4. Sambungan Kuasa: Connect the polisher's power cord to a suitable electrical outlet. Ensure the outlet matches the voltage requirements of the tool.

5. Arahan Operasi

1. Penyediaan Permukaan: Pastikan permukaan yang hendak digilap bersih, kering dan bebas daripada bahan cemar.
2. Application of Compound/Polish: Apply a small amount of polishing compound or wax directly to the polishing pad or the work surface.
3. Memulakan Penggilap: Hold the polisher firmly with both hands. Place the polishing pad flat against the work surface before turning the tool on.
4. Kawalan Kelajuan: Use the electronic speed controller to select the appropriate speed for your task. Start at a lower speed to spread the product, then increase as needed. The soft start feature ensures smooth power delivery.
5. Teknik Menggilap: Move the polisher in a consistent, overlapping pattern across the surface. Apply light, even pressure. The random orbit action minimizes swirl marks.
6. Penamat: Once the desired result is achieved, lift the polisher from the surface before turning it off.

6. Penyelenggaraan

• Pembersihan: After each use, disconnect the polisher from power. Clean the polishing pad and wipe down the tool with a damp kain. Jangan gunakan bahan kimia yang keras.
• Penggantian berus: Periodically inspect the carbon brushes for wear. Replace them when they are worn down to approximately 1/4 inch (6mm) or if the tool experiences reduced performance. Refer to the brush compartment for access.
• Storan: Store the polisher in a clean, dry place, out of reach of children.
• Pemeriksaan: Periksa kord kuasa secara berkala untuk kerosakan. Jika rosak, dapatkan pembaikan oleh juruteknik yang berkelayakan.

7. Penyelesaian masalah

• Alat tidak bermula:
  • Periksa sambungan kuasa.
  • Periksa kord kuasa untuk kerosakan.
  • Verify power outlet is functional.
• Reduced performance/sparking:
  • Carbon brushes may be worn and require replacement.
  • Pastikan voltage bekalan.
• Getaran/bunyi yang berlebihan:
  • Ensure polishing pad is properly centered and securely attached.
  • Periksa sebarang komponen yang longgar.

For issues not listed, contact customer support or a qualified service technician.

8. Spesifikasi

9. Waranti dan Sokongan

Untuk maklumat jaminan atau sokongan teknikal, sila rujuk pembungkusan produk atau hubungi pengilang secara langsung. Simpan resit pembelian anda sebagai bukti pembelian.

Manufacturer: HFT