Intex SX2800

Intex SX2800 Krystal Clear Sand Filter Pump User Manual

Model: SX2800 | Brand: Intex

pengenalan

The Intex SX2800 Krystal Clear Sand Filter Pump is designed to provide superior water circulation and filtration for your above-ground pool. Featuring Hydro Aeration Technology, this pump enhances water clarity and freshness by improving aeration and increasing negative ions at the water surface. With a robust 2800 GPH pump flow rate, it is suitable for pools up to 17,200 gallons, ensuring a clean and healthy swimming environment.

Pam Penapis Pasir Jelas Intex SX2800 Krystal

Image: The Intex SX2800 Krystal Clear Sand Filter Pump, showcasing its main components including the sand tank and pump motor.

Ciri-ciri Utama

  • Hydro Aeration Technology: Improves circulation, filtration, water clarity, and increases negative ions.
  • Pemasangan Mudah: Simple hook-up of hoses and plug-in operation.
  • Pemasa 24 Jam: Built-in timer with 2 to 12-hour pre-set cycles for automatic operation.
  • High Pump Flow Rate: 2,800 GPH (10,599 lph) pump capacity, 2,150 GPH (8,138 lph) system flow rate.
  • Keserasian: Suitable for Intex pools up to 17,200 gallons.
  • 6 Fungsi: Filtration, circulation, backwash, drain, rinse, and close the system.
Features of the Intex Sand Filter Pump: built-in timer, pressure gauge, 6 functions, and strainer basket.

Image: Visual representation of the pump's control panel with timer, pressure gauge, multi-port valve, and strainer basket.

Persediaan

Setting up your Intex SX2800 Krystal Clear Sand Filter Pump is designed to be straightforward. Before beginning, ensure you have all components as listed in the packaging. Partial assembly is required. The pump connects to your pool using two 1.5-inch connector hoses and features a Hydro Aeration Technology inlet fitting for simple connection.

  1. penempatan: Position the pump on a firm, level surface near your pool, ensuring it is at least 10 feet away from the pool edge and protected from direct sunlight and rain.
  2. Pengisian Pasir: Carefully fill the filter tank with the recommended amount of #20 silica sand (approximately 77 lbs or 35 kg). Ensure the standpipe is centered during this process.
  3. Sambungan Hos: Connect the inlet and outlet hoses from the pump to the corresponding fittings on your pool. Ensure all connections are secure to prevent leaks.
  4. Sambungan Kuasa: Plug the pump into a grounded electrical outlet. Always use a GFCI (Ground Fault Circuit Interrupter) protected outlet.
  5. Penyebuan: Before starting, ensure the pump is primed by allowing water to fill the pump housing. Refer to the detailed user manual for specific priming instructions.

For detailed, step-by-step instructions with diagrams, please refer to the official Panduan Pengguna (PDF).

Person setting up the Intex Krystal Clear Sand Filter Pump next to an above-ground pool.

Image: A person demonstrating the setup of the Krystal Clear Sand Filter Pump beside an above-ground pool.

Intex SX2800 Sand Filter Pump highlighting compatibility, easy installation, cost-efficiency, and sand capacity.

Image: Diagram illustrating the pump's compatibility with various pool sizes and its easy installation features.

Arahan Operasi

The Intex SX2800 Sand Filter Pump offers multiple functions controlled by its multi-port valve and built-in timer for efficient pool maintenance.

Multi-Port Valve Functions:

  • Penapis: Normal filtering operation. Water is pumped through the sand bed, filtered, and returned to the pool.
  • Basuh belakang: Reverses water flow to clean the sand bed. This should be done when the pressure gauge indicates a higher-than-normal reading.
  • Bilas: Used after backwashing to flush out any remaining dirt from the sand bed before returning to filter mode.
  • Sisa/Longkang: Bypasses the filter and pumps water directly out of the pool, useful for lowering water level or vacuuming heavy debris.
  • Edar semula: Circulates water through the pump without going through the filter, useful for mixing chemicals.
  • Ditutup: Shuts off all flow to the filter and pump, used for maintenance or when the pool is not in use.

Menggunakan Pemasa 24 Jam:

The built-in 24-hour timer allows you to set automatic operation cycles from 2 to 12 hours. This feature ensures consistent filtration without manual intervention. Consult the user manual for specific programming steps for the timer.

Intex Krystal Clear Sand Filter Pump installed next to a pool.

Image: The Intex Krystal Clear Sand Filter Pump connected and operating next to an above-ground pool.

Visual representation of advanced circulation, improved clarity, and increased freshness in pool water.

Image: An illustration showing how the pump enhances water circulation, clarity, and freshness within the pool.

Penyelenggaraan

Proper maintenance ensures the longevity and optimal performance of your Intex SX2800 Sand Filter Pump. The primary maintenance tasks involve backwashing the sand filter and occasionally cleaning the strainer basket.

  • Mencuci belakang: Perform backwashing when the pressure gauge reading is 3-5 PSI above the initial clean pressure, or when water flow to the pool noticeably decreases. This process cleans the sand bed by reversing water flow.
  • Bilas: Always rinse the filter after backwashing to settle the sand and prevent dirty water from returning to the pool.
  • Strainer Basket Cleaning: Periodically check and clean the strainer basket located at the front of the pump. Turn off the pump and close the valves before opening the strainer cover.
  • Penggantian Pasir: The filter sand typically needs replacement every 5 years, depending on usage and water quality.
  • Musim sejuk: Before winter, drain all water from the pump and filter tank. Store the unit in a dry, protected area to prevent freezing damage.
jarak dekat view of the Intex Krystal Clear Sand Filter Pump.

Imej: A terperinci view of the pump's components, including the strainer basket, which requires periodic cleaning.

Menyelesaikan masalah

This section provides general guidance for common issues. For comprehensive troubleshooting, refer to the full user manual.

MasalahKemungkinan PuncaPenyelesaian
Aliran Air RendahClogged strainer basket, dirty sand filter, air in system, closed valves.Clean strainer basket, backwash/rinse filter, bleed air from system, open all valves.
Pam Tidak BermulaTiada kuasa, GFCI tersandung, motor terlalu panas.Periksa sambungan kuasa, tetapkan semula GFCI, benarkan motor sejuk.
Kebocoran AirLoose connections, worn O-rings/gaskets.Ketatkan sambungan, periksa dan gantikan cincin O/gasket mengikut keperluan.
Air Kolam MendungInsufficient filtration time, dirty filter, chemical imbalance.Increase run time, backwash/rinse filter, test and adjust pool chemicals.

Spesifikasi

Detailed technical specifications for the Intex SX2800 Krystal Clear Sand Filter Pump:

SpesifikasiNilai
JenamaIntex
Nombor Model26647EG
Pump Flow Rate (Pump Capacity)2,800 GPH (10,599 lph)
System Flow Rate (In Pool)2,150 GPH (8,138 lph)
Voltage120 Volt
Wattage120 watt
Kapasiti Pasir77 lbs (35 kg) #20 Silica
Dimensi Produk (L x W x H)23.38"L x 15.75"W x 26.25"H
Berat Barang33 paun
Saiz Kolam Renang yang SesuaiSehingga 17,200 gelen
Specifications for Intex Sand Filter Pump including flow rate, sand capacity, and voltage.

Image: Infographic detailing key specifications such as system flow rate, sand capacity, pool size compatibility, and voltage.

Waranti dan Sokongan

The Intex SX2800 Krystal Clear Sand Filter Pump comes with a Waranti pengilang selama 2 tahun. For warranty claims, technical support, or additional product information, please refer to the official Intex webtapak atau hubungi perkhidmatan pelanggan mereka secara langsung.

You can also find more information and products from Intex by visiting the Intex Brand Store.

For a complete guide, download the official Panduan Pengguna (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.