WORKPRO Pink Cordless 20V Lithium-ion Drill Driver Set Instruction Manual

1. Pengenalan

This manual provides essential information for the safe operation, maintenance, and care of your WORKPRO Pink Cordless 20V Lithium-ion Drill Driver Set. Please read these instructions carefully before using the tool and retain them for future reference.

Imej 1.1: Selesaiview of the WORKPRO Pink Cordless 20V Lithium-ion Drill Driver Set, including the drill, battery, charger, storage bag, and various drill and driver bits.

2. Arahan Keselamatan Am

Sentiasa ikuti langkah berjaga-jaga keselamatan asas untuk mengurangkan risiko kebakaran, renjatan elektrik dan kecederaan diri apabila menggunakan alatan kuasa.

• Keselamatan Kawasan Kerja: Pastikan kawasan kerja bersih dan terang. Kawasan bersepah atau gelap mengundang kemalangan. Jangan kendalikan alatan kuasa dalam atmosfera yang mudah meletup, seperti di hadapan cecair mudah terbakar, gas atau habuk.
• Keselamatan Elektrik: Elakkan sentuhan badan dengan permukaan yang dibumikan atau dibumikan seperti paip, radiator, dapur dan peti sejuk. Jangan dedahkan alat kuasa kepada hujan atau keadaan basah.
• Keselamatan Diri: Sentiasa pakai pelindung mata. Gunakan perlindungan pendengaran apabila beroperasi untuk tempoh yang lama. Berpakaian dengan betul; elakkan pakaian atau barang kemas yang longgar. Selamat rambut panjang.
• Penggunaan dan Penjagaan Alat: Jangan paksa alat kuasa. Gunakan alat kuasa yang betul untuk aplikasi anda. Putuskan sambungan palam daripada sumber kuasa dan/atau pek bateri daripada alat kuasa sebelum membuat sebarang pelarasan, menukar aksesori atau menyimpan alatan kuasa.
• Penggunaan dan Penjagaan Pek Bateri: Cas semula hanya dengan pengecas yang ditentukan oleh pengilang. Jangan gunakan pek bateri dengan mana-mana alat kuasa lain.

3. Komponen dan Ciri Produk

The WORKPRO Pink Cordless 20V Lithium-ion Drill Driver is designed for various drilling and driving tasks. Key components and features include:

• 20V Motor: Provides strong and steady power.
• 1.5Ah Lithium-ion Battery: Ensures endurable run time.
• Variable 2-Speed Settings: Offers speeds of 0-400 rpm and 0-1500 rpm for different applications.
• 21+1 Torque Adjustment: Delivers 203 in-Lbs (23 N.M) of max torque with precise adjustment.
• 3/8" (10mm) Keyless Chuck: Provides superior bit retention and easy bit changes.
• Pemegang Cengkaman Lembut: Meningkatkan keselesaan dan kawalan semasa penggunaan.
• Lampu LED: Menerangi kawasan kerja untuk penglihatan yang lebih baik di ruang gelap.
• Forward/Reverse Rotation Control: Allows for easy switching between drilling/driving and removing screws.
• Klip tali pinggang: Untuk mudah dibawa.

Image 3.1: Labeled diagram illustrating the key components of the drill driver, including the torque adjustment ring, keyless chuck, two-speed gear control, forward/reverse control, LED light, on/off switch, magnetic base, battery pack release button, and belt clip.

4. Arahan Persediaan

4.1. Mengecas Bateri

The battery pack is not fully charged upon purchase. It is recommended to fully charge the battery before first use. Use only the charger provided with your drill driver set.

1. Sambungkan pengecas ke soket elektrik standard.
2. Insert the battery pack into the charger. Ensure it is seated correctly.
3. Allow the battery to charge until the indicator light on the charger signals a full charge (refer to charger instructions for specific light indications).
4. Once charged, disconnect the battery from the charger and unplug the charger from the outlet.

4.2. Memasang dan Menanggalkan Pek Bateri

• Untuk Memasang: Jajarkan pek bateri dengan pangkal pemegang gerudi dan luncurkannya ke dalam sehingga ia terkunci dengan selamat pada tempatnya.
• Untuk Alih Keluar: Press the battery pack release button (located on the side of the battery pack) and slide the battery pack out.

4.3. Installing Drill/Driver Bits

The drill features a 3/8" (10mm) keyless chuck for easy bit changes.

1. Ensure the drill is off and the battery pack is removed for safety.
2. Grasp the rear half of the chuck and rotate the front half counter-clockwise until the chuck jaws are open wider than the bit you intend to insert.
3. Insert the drill bit or driver bit into the chuck jaws. Ensure the bit is centered and fully seated.
4. Rotate the front half of the chuck clockwise to tighten the jaws securely around the bit. Hand-tighten firmly.

Image 4.1: Visual guide demonstrating how to open and close the keyless chuck to insert or remove drill bits.

5. Arahan Operasi

5.1. On/Off Switch and Variable Speed Control

The trigger switch controls the drill's power and speed. Pressing the trigger initiates operation, and the speed is variable based on pressure applied.

• Untuk menghidupkan, tekan suis picu.
• Untuk meningkatkan kelajuan, berikan lebih banyak tekanan pada picu.
• To turn off, release the trigger switch.

5.2. Two-Speed Gear Control

The drill features a two-speed gear selector located on top of the tool.

• Position 1 (Low Speed, 0-400 RPM): Recommended for driving screws and applications requiring higher torque.
• Position 2 (High Speed, 0-1500 RPM): Disyorkan untuk penggerudian dan aplikasi yang memerlukan putaran lebih cepat.

Always ensure the drill is stopped before changing gear positions to prevent damage.

Image 5.1: Illustration of the two-speed transmission settings, indicating low speed (0-400 RPM) for screwdriving and high speed (0-1500 RPM) for drilling.

5.3. Cincin Penyesuaian Tork

The torque adjustment ring allows you to select the desired torque setting for driving screws, preventing over-tightening or stripping. The drill offers 21+1 torque settings.

• Rotate the ring to align the desired number with the indicator mark. Lower numbers are for smaller screws or softer materials; higher numbers are for larger screws or harder materials.
• The drill icon setting is for drilling applications, providing maximum torque.

Imej 5.2: Jarak dekat view of the 21+1 torque adjustment ring, showing the numbered settings and the drill icon for maximum torque.

5.4. Forward/Reverse Rotation Control

The forward/reverse lever is located above the trigger switch. It controls the direction of rotation.

• Push the lever to the left for forward rotation (drilling and driving screws).
• Push the lever to the right for reverse rotation (removing screws or jammed bits).
• When the lever is in the center position, the trigger is locked, preventing accidental startup.

5.5. Lampu Kerja LED

The integrated LED light activates when the trigger is pressed, illuminating the work surface for better visibility.

Image 5.3: The drill's LED light in operation, providing illumination in a dimly lit area.

5.6. Aplikasi

This drill driver is suitable for various household tasks, including:

• Drilling holes in wood (up to 5/8" or 16mm) and metal (up to 7/32" or 6mm).
• Memandu dan menanggalkan skru.
• Memasang perabot.
• Hanging shelves and decorations.

Image 5.4: A user operating the drill driver to fasten a screw into a wooden surface.

Image 5.5: A user operating the drill driver to create a pilot hole in a wooden board.

6. Penyelenggaraan

Penyelenggaraan tetap memastikan prestasi optimum dan memanjangkan hayat alat anda.

• Pembersihan: Keep the ventilation openings clear and free of dust. Use a soft, damp kain untuk membersihkan alatan casing. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.
• Berus Karbon: This is a carbon brush drill. Sparks are normal during initial use and should decrease over time. If sparks become excessively large or persistent, it may indicate a malfunction or worn brushes, requiring professional inspection.
• Storan: Store the drill driver, battery, and charger in a cool, dry place, away from direct sunlight and moisture. Use the provided storage bag for protection.
• Penjagaan Bateri: Do not allow the battery to fully discharge. Recharge the battery regularly, even when not in use, to maintain its lifespan.

7. Penyelesaian masalah

Bahagian ini menangani isu biasa yang mungkin anda hadapi.

8. Spesifikasi

9. Waranti dan Sokongan

For warranty information, please refer to the documentation included with your purchase or visit the official WORKPRO website. If you encounter any issues or require technical assistance, please contact WORKPRO customer support.

Pengeluar: Zhejiang Minglei Tools Industrial Co., Ltd.

UPC: 820909749172