Digitus Fast Ethernet USB 2.0 Print Server User Manual

1. Produk Lebihview

The Digitus Fast Ethernet USB 2.0 Print Server is designed to easily connect your USB printer to a network, allowing multiple users to share a single printer. This device supports common network and printing protocols, including Peer-to-Peer and server printing environments. It is compatible with various operating systems such as Windows and Linux, and offers convenient management options via web interface or a Windows configuration utility.

Kandungan Pakej:

• Digitus Fast Ethernet USB 2.0 Print Server
• Penyesuai Kuasa
• Installation CD (or link to drivers/software online)
• Panduan Pemasangan Pantas

2. Persediaan dan Pemasangan

Follow these steps to set up your Digitus Fast Ethernet USB 2.0 Print Server:

2.1 Sambungan Perkakasan

1. Sambungkan Pencetak: Plug your USB printer's USB cable into the USB 2.0 port on the print server.
2. Sambungkan ke Rangkaian: Connect one end of an Ethernet cable to the RJ45 port on the print server and the other end to an available port on your network router or switch.
3. Sambungkan Kuasa: Plug the provided power adapter into the print server's power input (5V 1A) and then into a wall outlet. The Status LED should illuminate.

2.2 Software Installation and Configuration

The print server can be configured via a Windows utility or a web-based interface. It is recommended to use the Windows utility for initial setup.

1. Install Utility: Insert the provided installation CD into your computer's CD-ROM drive. If you do not have a CD drive, download the latest utility and drivers from the official Digitus webtapak.
2. Jalankan Persediaan: Follow the on-screen instructions to install the print server configuration utility.
3. Temui Peranti: Launch the utility. It should automatically detect the print server on your network. If not, ensure your computer is on the same network segment as the print server.
4. Konfigurasikan Alamat IP: By default, the print server might have a static IP address (e.g., 192.168.0.10). For most home or small office networks, it is recommended to configure it to obtain an IP address automatically via DHCP.
   • In the utility, navigate to the TCP/IP settings.
   • Select "Obtain TCP/IP Settings Automatically (Use DHCP/BOOTP)".
   • Apply changes and restart the print server if prompted.
5. Tambah Pencetak: Once the print server has a valid IP address on your network, add the printer to your computer's operating system as a network printer.
   • Go to "Devices and Printers" (Windows) or "Printers & Scanners" (macOS/Linux).
   • Select "Add a printer".
   • Choose to add a network, wireless, or Bluetooth printer.
   • If prompted for a port, select "Standard TCP/IP Port" and enter the IP address of the print server.
   • Select the appropriate printer driver for your connected USB printer.
6. Cetakan Ujian: Print a test page to confirm successful installation.

3. Mengendalikan Pelayan Cetak

Once configured, the print server operates largely autonomously. Users on the network can print to the connected USB printer as if it were directly connected to their computer.

3.1 Printing from Networked Devices

• Ensure the print server is powered on and connected to the network.
• Ensure the USB printer is powered on and connected to the print server.
• From any computer or device on the network that has the printer installed, simply select the network printer from your application's print dialog and send the print job.
• The print server will queue and manage print jobs from multiple users.

3.2 Web-Pengurusan Berasaskan

For advanced configuration or monitoring, you can access the print server's web antara muka:

1. Buka a web pelayar pada komputer yang disambungkan ke rangkaian yang sama.
2. Enter the IP address of the print server into the browser's address bar (e.g., http://192.168.1.100).
3. Log in if prompted (default credentials are often "admin" for both username and password, refer to the quick start guide for specifics).
4. daripada web antara muka, anda boleh view status, change network settings, update firmware, and manage other print server functions.

4. Penyelenggaraan

The Digitus Fast Ethernet USB 2.0 Print Server requires minimal maintenance to ensure optimal performance.

• Jaga kebersihan: Lap secara berkala bahagian luar peranti dengan kain lembut dan kering. Jangan gunakan pembersih cecair atau aerosol.
• Pengudaraan: Ensure the print server is placed in a well-ventilated area to prevent overheating. Do not block any ventilation openings.
• Kemas kini Firmware: Check the official Digitus website periodically for firmware updates. Updating firmware can improve performance, add features, or resolve known issues. Follow the instructions provided with the firmware update carefully.
• Kitaran Kuasa: If the device becomes unresponsive or experiences connectivity issues, try power cycling it (unplug the power adapter, wait 10 seconds, then plug it back in).

5. Penyelesaian masalah

This section addresses common issues you might encounter with the print server.

6. Spesifikasi Teknikal

7. Waranti dan Sokongan

7.1 Waranti Pengilang

The Digitus Fast Ethernet USB 2.0 Print Server comes with a Waranti pengilang selama 2 tahun. Waranti ini melindungi kecacatan pada bahan dan mutu kerja di bawah penggunaan biasa. Sila simpan bukti pembelian anda untuk tuntutan waranti.

The product originates from the European Economic Area (EEA) and is genuinely sourced from distributors authorized by the manufacturer.

7.2 Sokongan Teknikal

For technical assistance, driver downloads, or firmware updates, please visit the official Digitus website. You can also find FAQs and additional resources there.

Official Digitus Solutions: https://www.assmann.com/loesungen/loesungsuebersicht/

When contacting support, please have your product model number (DN-13003-2) and purchase information ready.