1. Produk Lebihview
Fieldpiece OIL32 is a high-quality vacuum pump oil designed for use with vacuum pumps in HVACR applications. This 1-quart (32 oz) container provides the necessary lubricant to ensure efficient and reliable operation of your vacuum pump. Manufactured in the United States, this oil is formulated to deliver consistent accuracy and performance, contributing to the longevity and effectiveness of your equipment.
Ciri-ciri utama termasuk:
- Dikilangkan di Amerika Syarikat.
- Formulated for consistent accuracy and performance.
- Suitable for heavy-duty shop products.
- Functions as a multitool accessory for vacuum pump maintenance.
Image 1.1: Fieldpiece OIL32 Vacuum Pump Oil, 1 quart (32 oz) bottle.
2. Persediaan dan Persediaan
Before adding or changing vacuum pump oil, ensure your vacuum pump is turned off and disconnected from any power source. Allow the pump to cool down if it has been recently in operation. Prepare a clean, stable work area and have appropriate tools and containers for used oil disposal ready.
Langkah Keselamatan:
- Always wear appropriate personal protective equipment (PPE), including safety glasses and gloves, when handling vacuum pump oil.
- Avoid skin and eye contact. In case of contact, rinse thoroughly with water and seek medical attention if irritation persists.
- Do not ingest. If swallowed, do not induce vomiting; seek immediate medical attention.
- Jauhkan daripada kanak-kanak dan haiwan peliharaan.
- Pastikan pengudaraan yang mencukupi di kawasan kerja.
3. Arahan Operasi
Adding Oil to a Vacuum Pump:
- Locate the oil fill port on your vacuum pump. This is typically marked or indicated in your pump's specific user manual.
- Tanggalkan penutup isi minyak.
- Carefully pour the Fieldpiece OIL32 into the fill port, using a funnel if necessary, to prevent spills.
- Monitor the oil level through the sight glass (if available) or according to your pump's instructions. Fill to the recommended level, typically between the 'MIN' and 'MAX' marks. Do not overfill.
- Gantikan penutup isi minyak dengan selamat.
Memeriksa Tahap Minyak:
Regularly check the oil level in your vacuum pump. The oil level should be visible in the sight glass and maintained within the manufacturer's recommended range. Low oil levels can lead to pump damage, while excessively high levels can cause oil to be expelled during operation.
Imej 3.1: Cthample of a Fieldpiece vacuum pump, showing where oil is typically added and checked.
4. Penyelenggaraan
Kekerapan Penukaran Minyak:
The frequency of oil changes depends on the usage and operating conditions of your vacuum pump. As a general guideline, change the oil:
- After every use when evacuating systems with high moisture content.
- When the oil appears cloudy, milky, or discolored.
- At least every 10-20 hours of operation under normal conditions.
- Refer to your specific vacuum pump's manual for precise recommendations.
Changing Vacuum Pump Oil:
- Pastikan pam dimatikan dan sejuk.
- Letakkan bekas yang sesuai di bawah palam saliran minyak.
- Tanggalkan palam pembuangan minyak dan biarkan semua minyak lama mengalir sepenuhnya.
- Pasangkan semula palam saliran minyak dengan kukuh.
- Follow the 'Adding Oil' instructions in Section 3 to refill with fresh Fieldpiece OIL32.
Proper Disposal of Used Oil:
Used vacuum pump oil must be disposed of responsibly and in accordance with local environmental regulations. Do not pour used oil down drains or dispose of it in regular trash. Contact your local waste management facility or an authorized oil recycling center for proper disposal methods.
Storan:
Store Fieldpiece OIL32 in its original container, tightly sealed, in a cool, dry place away from direct sunlight and extreme temperatures. Keep away from ignition sources.
5. Penyelesaian masalah
This section addresses common issues related to vacuum pump oil. For pump-specific troubleshooting, consult your vacuum pump's user manual.
| simptom | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Oil appears cloudy or milky | Moisture contamination | Change the oil immediately. Ensure system being evacuated is as dry as possible. |
| Oil is dark or discolored | Contamination or degradation from heat/usage | Change the oil. Increase oil change frequency if discoloration occurs rapidly. |
| Vacuum pump not pulling deep vacuum | Contaminated or insufficient oil level | Check oil level and condition. Change oil if contaminated or low. Ensure no leaks in the system or pump. |
| Oil misting from exhaust | Overfilled oil, incorrect oil type, or worn pump components | Check oil level and drain if overfilled. Ensure correct oil type (Fieldpiece OIL32) is used. If problem persists, consult pump manufacturer. |
6. Spesifikasi
- Pengeluar: Bahan ladang
- Nombor Bahagian: MINYAK32
- Berat Barang: 2 paun
- Dimensi Produk: 5 x 3 x 9 inci
- Nombor Model Item: MINYAK32
- warna: Orange (packaging)
- Sumber Kuasa: OIL QUART (refers to product type)
- Kuantiti Pakej Item: 1
- Komponen yang Disertakan: Multitool Accessory (refers to its use in maintenance)
- ASIN: B07DNJW9JV
- Tarikh Mula-mula Tersedia: 11 Jun 2018
7. Maklumat Waranti
As a consumable product, Fieldpiece OIL32 Vacuum Pump Oil typically does not carry a specific warranty beyond being free from manufacturing defects upon purchase. For information regarding warranties on Fieldpiece vacuum pumps or other tools, please refer to the documentation provided with those specific products or visit the official Fieldpiece webtapak.
8. Maklumat Sokongan
For further assistance, technical support, or product inquiries regarding Fieldpiece products, please visit the official Fieldpiece webtapak atau hubungi bahagian perkhidmatan pelanggan mereka.
- Fieldpiece Official Store: Visit the Fieldpiece Store on Amazon
- Pertanyaan Umum: Refer to the contact information available on the official Fieldpiece webtapak.
No official product videos specifically for Fieldpiece OIL32 were found in the provided data.