Hurricane Pro 24-inch Heavy Duty Drum Fan Instruction Manual

1. Pengenalan

Thank you for choosing the Hurricane Pro 24-inch Heavy Duty Drum Fan. This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your new fan. Please read all instructions carefully before use and retain this manual for future reference.

This high-velocity drum fan is designed to deliver powerful airflow, making it ideal for large spaces such as garages, workshops, greenhouses, and other indoor environments requiring significant air circulation.

2. Arahan Keselamatan

2.1 Keselamatan Am

• Sentiasa cabut plag kipas dari salur keluar kuasa sebelum membersihkan, menservis atau mengalihkannya.
• Do not operate the fan with a damaged cord or plug. If the cord is damaged, it must be replaced by the manufacturer or a qualified service agent.
• Jauhkan kanak-kanak dan haiwan peliharaan dari kipas semasa operasi.
• Jangan masukkan jari atau sebarang objek melalui gril semasa kipas sedang beroperasi.
• Pastikan kipas diletakkan pada permukaan yang stabil dan rata untuk mengelakkan terbalik.
• Jangan gunakan kipas ini dalam keadaan basah atau damp lokasi, seperti bilik mandi atau kawasan dobi.
• Kipas ini bertujuan untuk kegunaan dalaman sahaja.

2.2 Keselamatan Elektrik

• Connect the fan to a properly grounded 120V AC, 60Hz power outlet.
• Jangan membebankan saluran keluar elektrik.
• Jangan jalankan kord kuasa di bawah permaidani atau tutup dengan permaidani lempar, pelari atau penutup yang serupa. Susun kord jauh dari kawasan lalu lintas di mana ia tidak akan tersandung.
• This fan features a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

3. Kandungan Pakej

Your Hurricane Pro 24-inch Heavy Duty Drum Fan package should include the following components:

• 1 x Hurricane Pro 24-inch Drum Fan (main unit with pre-assembled fan head)
• 1 x U-shaped stand/legs (2 pieces)
• 2 x Wing nuts with washers
• 1 x Manual Arahan

4. Perhimpunan

The Hurricane Pro 24-inch Drum Fan comes mostly pre-assembled, requiring minimal setup. The main fan unit, including the blades and grill, is already intact. You only need to attach the stand/legs.

1. Pasang Pendirian: Locate the two U-shaped stand pieces. These pieces connect to the main fan unit on either side.
2. Secure with Wing Nuts: Align the holes on the stand pieces with the corresponding holes on the fan's frame. Insert the provided screws (which may be pre-attached to the fan frame) through the holes, ensuring the washers are in place. Securely tighten the wing nuts on both sides.
3. Connect Rear Stand Pieces: The two U-shaped stand pieces connect at the rear. They feature a snap-in mechanism. Push the pin on one piece and slide it into the other until it snaps securely into place.

Once the stand is securely attached, your fan is ready for operation.

5. Arahan Operasi

5.1 Hidup/Mati dan Pelarasan Kelajuan

The fan features a 3-speed rotary switch located at the rear of the fan head.

1. Sambung ke Kuasa: Plug the fan's power cord into a suitable 120V AC, 60Hz grounded electrical outlet.
2. Turn On/Adjust Speed: Rotate the power switch clockwise to select your desired speed setting:
   • L (Low Speed): For gentle air circulation.
   • M (Medium Speed): Untuk aliran udara yang sederhana.
   • H (High Speed): For maximum air circulation (7195 CFM).
3. Matikan: Rotate the power switch counter-clockwise until it reaches the 'O' (Off) position.

5.2 Pelarasan Kecondongan

The fan head can be tilted to direct airflow precisely where needed. To adjust the tilt angle:

1. Loosen the wing nuts on both sides of the fan frame (if they are tightened).
2. Gently tilt the fan head to the desired upward or downward angle.
3. Tighten the wing nuts on both sides to secure the fan head in position.

6. Penyelenggaraan

6.1 Pembersihan

Pembersihan berkala akan membantu mengekalkan prestasi kipas anda dan memanjangkan jangka hayatnya.

1. Cabut plag: Sentiasa cabut plag kipas dari salur keluar kuasa sebelum membersihkan.
2. Luaran Bersih: Gunakan yang lembut, damp cloth to wipe down the exterior surfaces of the fan. Do not use abrasive cleaners or chemicals.
3. Clean Grills and Blades: The front and rear grills can be removed for thorough cleaning. Carefully unclip the fasteners around the grill to detach it. Wipe the fan blades with a soft, damp kain. Pastikan semua bahagian kering sepenuhnya sebelum memasang semula dan mengendalikan kipas.

6.2 Penyimpanan

When not in use, store the fan in a cool, dry place, away from direct sunlight and moisture. You may cover it to protect it from dust.

7. Penyelesaian masalah

• Kipas tidak beroperasi:
  • Pastikan kord kuasa dipasang dengan selamat ke dalam salur keluar elektrik yang berfungsi.
  • Check if the power switch is in the 'L', 'M', or 'H' position.
  • Verify that the electrical outlet is functioning by plugging in another device.
• Pengurangan aliran udara:
  • Check if the fan grills or blades are obstructed by dust or debris. Clean as per maintenance instructions.
  • Ensure the fan is set to a higher speed setting if more airflow is desired.
• Bunyi atau getaran luar biasa:
  • Turn off and unplug the fan. Check for any loose parts or foreign objects caught in the blades or grill.
  • Pastikan kipas diletakkan pada permukaan yang stabil dan rata.

8. Spesifikasi

9. Waranti dan Sokongan

Untuk maklumat jaminan atau sokongan pelanggan, sila rujuk dokumentasi yang disertakan dengan pembelian anda atau hubungi pengilang secara langsung. Simpan bukti pembelian anda untuk sebarang tuntutan jaminan.