Andis 74000 Professional Cordless T-Outliner Beard/Hair Trimmer

1. Pengenalan

This manual provides essential information for the safe and effective use of your Andis 74000 Professional Cordless T-Outliner Beard/Hair Trimmer. Please read all instructions carefully before operation and retain this manual for future reference.

2. Maklumat Keselamatan

Untuk mengurangkan risiko melecur, kebakaran, kejutan elektrik atau kecederaan kepada orang:

• Close supervision is required when this product is used by, on, or near children, or persons with limited physical, sensory, or mental capabilities or invalid.

3. Produk Lebihview

The Andis 74000 Professional Cordless T-Outliner is designed for precise beard and hair trimming. It combines classic T-Outliner performance with cordless convenience.

Ciri-ciri Utama:

• Lithium-ion battery for over 100 minutes of nonstop run time.
• Charges in just 1 hour.
• Extremely powerful, high-speed rotary motor with blade speeds over 7,200 SPM.
• Features constant speed technology to prevent dragging or stalling.
• Close-cutting carbon-steel T-blade for lining, designing, and dry-shaving.
• Blade can be zero-gapped for ultra-close cuts.
• Cord/Cordless operation with an LED light indicating battery power levels.

Figure 1: Andis 74000 Professional Cordless T-Outliner Trimmer.

4. Apa yang Termasuk

Your Andis 74000 Professional Cordless T-Outliner package includes:

• Andis 74000 Cordless T-Outliner Trimmer
• Dudukan Pengecas
• Tube of Blade Oil
• 4 Attachment Combs (1/16 inch, 1/8 inch, 1/4 inch, 3/8 inch)
• Penyesuai Kuasa

Figure 2: Andis 74000 Trimmer with its charging stand and accessories.

5. Persediaan

5.1 Pengecasan Awal

Before first use, fully charge your trimmer. The lithium-ion battery provides over 100 minutes of run time and charges in approximately 1 hour. The LED light on the trimmer indicates battery power levels.

Figure 3: Andis 74000 Trimmer placed on its charging stand.

5.2 Memasang Sikat

Select the desired attachment comb (1/16 inch, 1/8 inch, 1/4 inch, or 3/8 inch) and securely snap it onto the trimmer blade. Ensure it is firmly in place before use.

5.3 Blade Zero-Gapping

For the closest possible cut, the T-Outliner blade can be zero-gapped. This process involves adjusting the blade alignment. Refer to the official video below for detailed instructions on blade replacement and zero-gapping.

6. Arahan Operasi

6.1 Menghidupkan/Mematikan

To turn the trimmer on, slide the power switch to the 'I' position. The Andis logo will illuminate blue. To turn off, slide the switch to the 'O' position.

6.2 Penggunaan

The Andis 74000 is suitable for dry shaving, edging, light shaping, and outlining. Its high-speed rotary motor and constant speed technology ensure consistent performance across various hair types (coarse, dry, fine, thick, wet).

7. Penyelenggaraan

7.1 Pembersihan

After each use, brush any loose hair from the blades. For thorough cleaning, detach the blade set (refer to the blade replacement video in Section 5.3) and clean with a suitable brush or compressed air.

7.2 Bilah Pelinciran

Regularly oil the blades to maintain optimal cutting performance and prolong blade life. Apply a few drops of the included blade oil to the teeth and sides of the blades while the trimmer is running. Wipe off any excess oil.

7.3 Penggantian Bilah

If blades become dull or damaged, they can be replaced. Refer to the official video in Section 5.3 for detailed instructions on how to safely replace the blade set.

8. Penyelesaian masalah

If your trimmer is not performing as expected, consider the following:

• Trimmer tidak dihidupkan: Ensure the battery is fully charged. Check if the power switch is in the 'I' position.
• Bilah menarik atau menyambar rambut: Blades may be dull, improperly aligned, or require oiling. Clean and oil the blades. If the issue persists, consider zero-gapping or replacing the blades.
• Reduced run time: The battery may not be fully charging or may be nearing the end of its lifespan. Ensure proper charging procedures are followed.

For further assistance, please contact Andis customer support.

9. Spesifikasi

10. Waranti & Sokongan

10.1 Maklumat Waranti

This Andis product comes with a Waranti terhad 1 tahun dari tarikh pembelian. Sila simpan bukti pembelian anda untuk tuntutan waranti.

10.2 Sokongan Pelanggan

If you have any questions or problems with this product, TOLONG JANGAN PULANG KE KEDAI. Call Customer Service toll-free at 1-800-558-9441 (7:00 a.m. - 6:00 p.m. Central time) or visit our webtapak: www.andis.com.