Belanger B1812-50 Single Handle Pull-Out Kitchen Faucet User Manual

1. Pengenalan

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Belanger B1812-50 Single Handle Pull-Out Kitchen Faucet. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product. Retain this manual for future reference.

Figure 1: Belanger B1812-50 Single Handle Pull-Out Kitchen Faucet.

This image displays the Belanger B1812-50 kitchen faucet, featuring a polished chrome finish. The faucet includes a single handle for water control and a pull-out spray head, designed for standard kitchen sink installations.

2. Maklumat Keselamatan

• Sentiasa matikan bekalan air utama sebelum memulakan sebarang pemasangan atau penyelenggaraan.
• Pakai peralatan pelindung diri yang sesuai, seperti cermin mata keselamatan, semasa pemasangan.
• Pastikan semua sambungan selamat untuk mengelakkan kebocoran.
• Jika anda tidak pasti tentang mana-mana bahagian proses pemasangan, berunding dengan tukang paip yang berkelayakan.
• Jangan gunakan pembersih yang kasar atau bahan kimia yang keras pada kemasan paip, kerana ini boleh menyebabkan kerosakan.

3. Komponen yang Disertakan

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:

• Belanger B1812-50 Faucet Assembly (main body with handle and pull-out spray head)
• Perkakasan Pemasangan
• Supply Lines (typically integrated or included)
• Arahan Pemasangan (manual ini)

4. Persediaan dan Pemasangan

4.1 Pra-Pemasangan

1. Matikan injap bekalan air panas dan sejuk di bawah sink. Jika tiada injap tutup hadir, matikan bekalan air utama ke rumah.
2. Kosongkan kawasan di bawah singki untuk akses mudah.
3. Remove your old faucet, if applicable. Clean the sink surface thoroughly.
4. Ensure your sink has the standard 3-hole, 8-inch centerset configuration required for this faucet.

4.2 Langkah Pemasangan Paip

1. Letakkan Paip: Place the faucet assembly onto the sink holes. Ensure the base gasket is properly seated to prevent leaks.
2. Selamatkan Faucet: From underneath the sink, thread the mounting nuts onto the faucet shanks. Hand-tighten, then use a wrench to secure firmly, but do not overtighten.
3. Sambung Talian Bekalan Air: Connect the hot and cold water supply lines from the faucet to the corresponding shut-off valves. Use thread sealant tape on the threads for a watertight seal. Tighten connections with a wrench.
4. Install Spray Hose Weight: Attach the provided weight to the pull-out spray hose, typically at the lowest point of the loop under the sink, to ensure the spray head retracts properly.
5. Ujian untuk Kebocoran: Slowly turn on the hot and cold water supply valves. Check all connections for leaks. Run the faucet for a few minutes to flush out any debris and check for proper operation of the spray head.

Figure 2: Faucet with pull-out spray head.

This image shows the Belanger B1812-50 faucet with its pull-out spray head fully extended, demonstrating the flexibility for various kitchen tasks. The black hose is visible, connecting the spray head to the main faucet body.

5. Arahan Operasi

5.1 Pengaliran Air dan Kawalan Suhu

The Belanger B1812-50 faucet features a single lever handle for controlling both water flow and temperature.

• Untuk Menghidupkan/Mematikan: Angkat pemegang ke atas untuk menghidupkan air. Tolak pemegang ke bawah untuk mematikan air.
• To Adjust Water Flow: Semakin jauh pemegangnya diangkat, semakin besar aliran air.
• Untuk Melaraskan Suhu: Move the handle to the left for hot water and to the right for cold water. The center position provides mixed water.

5.2 Pull-Out Spray Head and Diverter

• Untuk Memperluas: Gently pull the spray head from the spout. The hose will extend, allowing you to direct water to various areas of the sink.
• Untuk Menarik Balik: Once finished, guide the spray head back into the spout. The hose weight under the sink will assist in retraction.
• Stream/Spray Selection: The spray head includes a push-button diverter. Press the button to switch between a steady stream and a wide spray pattern.

6. Penyelenggaraan

6.1 Membersihkan Paip

• Clean the faucet regularly with a soft cloth and mild soap and water.
• Bilas dengan air bersih dan keringkan dengan kain lembut untuk mengelakkan bintik air.
• Do not use abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the polished chrome finish.

6.2 Pembersihan Aerator

If water flow decreases or becomes irregular, the aerator may be clogged with debris.

1. Tanggalkan skru aerator dari hujung kepala semburan.
2. Bilas skrin aerator di bawah air yang mengalir untuk membuang sebarang zarah.
3. Pasang semula aerator dan skrukannya semula pada kepala semburan.

7. Penyelesaian masalah

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact customer support.

8. Spesifikasi

Figure 3: Key features of the Belanger B1812-50 faucet.

This diagram highlights the main features of the Belanger B1812-50 faucet, including its single handle control, compatibility with standard 8-inch sinks, eco-friendly 1.8 GPM flow rate, and pull-out spray head functionality.

• model: B1812-50
• Jenama: Plumb Pak (Manufactured by Belanger)
• Selesai: Chrome yang digilap
• Bahan: Non-metallic construction (handle material: Brass)
• Jenis Pemasangan: Deck Mount, 3-hole installation
• Jenis Pemasangan: 8-inch Centerset
• Bilangan Pemegang: 1 (Pemegang Tunggal)
• Jangkauan muncung: 7-inch pull-out spout reach
• Kadar Aliran: 1.8 Gelen Seminit (GPM)
• Ciri Khas: Lead Free, Pull-Out Sprayer, Push-button diverter for stream/spray
• Pematuhan: ADA and cUPC
• Berat Barang: Kira-kira 2.74 paun
• Dimensi Produk: 5.5 x 12.25 x 13.75 inci

9. Waranti dan Sokongan

This Belanger B1812-50 faucet is backed by a Waranti Seumur Hidup Terhad. Waranti ini melindungi kecacatan pada bahan dan mutu kerja di bawah penggunaan dan perkhidmatan biasa.

For warranty claims, technical assistance, or replacement parts, please contact the manufacturer, Belanger (Plumb Pak), directly. Please have your model number (B1812-50) and proof of purchase available when contacting support.

Untuk maklumat lanjut, anda boleh melawati Plumb Pak brand page atau yang penyenaraian produk untuk butiran tambahan.