Pemasa Mingguan Digital deleyCON MK2639 untuk Panel Kawalan - Manual Pengguna

1. Pengenalan

This manual provides detailed instructions for the installation, setup, and operation of your deleyCON MK2639 Digital Weekly Timer. This device is designed for precise control of electrical appliances by switching them ON and OFF according to programmed schedules. It is intended for installation in electrical control panels.

2. Maklumat Keselamatan

WARNING: Electrical shock hazard. Installation and maintenance should only be performed by a qualified electrician in accordance with all local and national electrical codes.

• Always disconnect power before installing or servicing the timer.
• Ensure the timer is installed in a dry, indoor environment.
• Jangan melebihi kapasiti beban maksimum 3600W (16A).
• Sahkan semua sambungan selamat dan betul sebelum memulihkan kuasa.

3. Ciri-ciri Produk

• Digital timer with clear LCD display.
• Designed for installation in electrical control panels.
• 10 programmable ON/OFF switching programs.
• Minimum switching interval of 1 minute.
• 16 different weekday combination options for flexible scheduling.
• Selectable 12 or 24-hour display format.
• Fungsi penggantian HIDUP/MATI manual.
• Adjustable Daylight Saving Time (DST) feature.
• IP20 protection class, suitable for indoor use.
• Integrated NiMH 1.2V backup battery providing over 100 hours of power reserve for settings retention during power outages.

4. Kandungan Pakej

• 1 x deleyCON MK2639 Digital Weekly Timer with LCD Display
• 1 x Manual Pengguna

5. Produk Lebihview

Rajah 1: Depan View of the Digital Timer
This image displays the front of the deleyCON MK2639 timer, featuring the LCD screen, and the control buttons labeled R, W+, H+, M+, C+, MANUAL, and RES/RCL. The ON/OFF indicator is also visible.

Figure 2: Side and Back View
This image shows the side and back of the timer, highlighting the model number (MK2639 / TGE-12), input voltage (230V~50Hz), maximum load (16(2)A, 3600W), and the DIN rail mounting clip.

Butang Kawalan:

• R (Tetapkan Semula): Resets the timer to factory defaults.
• W+ (Week+): Adjusts the day of the week or selects weekday combinations during programming.
• H+ (Hour+): Melaraskan jam.
• M+ (Minute+): Melaraskan minit.
• C+ (Clock+): Used in conjunction with W+, H+, M+ to set the current time.
• MANUAL: Bertukar antara mod HIDUP, MATI dan AUTO.
• RES/RCL (Reset/Recall): Used to clear or recall program settings.

6. Pemasangan

The deleyCON MK2639 Digital Weekly Timer is designed for DIN rail mounting within an electrical control panel.

6.1 Mounting on DIN Rail

1. Ensure all power to the control panel is disconnected at the main breaker.
2. Locate an available space on the DIN rail.
3. Attach the timer to the DIN rail by hooking the top edge onto the rail and then pressing the bottom edge until the clip engages.

Rajah 3: Mekanisme Pemasangan Rel DIN
This image illustrates the removable clear front cover and the spring-loaded clip at the bottom of the timer, which secures it to a DIN rail.

Figure 4: Timer Installed on DIN Rail
The timer is shown securely mounted on a standard DIN rail, ready for wiring connections.

6.2 Sambungan Pendawaian

Refer to the wiring diagram below for correct electrical connections. All wiring must comply with local electrical codes.

Rajah 5: Diagram Pendawaian
This diagram shows the terminal layout: L (Live Input), N (Neutral Input), and output terminals 1, 2, 3, 4, 5 for connecting the load. Terminals 1 and 2 are typically for the normally open contact, while 3, 4, 5 represent common, normally closed, and normally open contacts respectively for the internal relay.

• Connect the Live (L) wire from your power supply to the terminal marked 'L'.
• Connect the Neutral (N) wire from your power supply to the terminal marked 'N'.
• For the load connection, use terminals 3, 4, and 5. Terminal 3 is the common contact. Terminal 4 is normally closed (NC) and Terminal 5 is normally open (NO). Connect your appliance's live wire to Terminal 5 (for switching ON) and the neutral to the neutral supply.
• Ensure all terminal screws are tightened securely.

7. Persediaan Awal

7.1 Menetapkan Semula Pemasa

Selepas penggunaan pertama atau selepas penggunaan kuasa yang berpanjangantage, it is recommended to reset the timer. Press the R button with a pointed object (e.g., a pen tip) to clear all settings and reset the display.

7.2 Menetapkan Waktu dan Hari Semasa

1. Tekan dan tahan butang C+ butang.
2. Sambil pegang C+, tekan W+ untuk menetapkan hari semasa dalam seminggu (ISNIN, TU, KITA, KE, JUM, SA, AHAD).
3. Sambil pegang C+, tekan H+ untuk menetapkan jam semasa.
4. Sambil pegang C+, tekan M+ untuk menetapkan minit semasa.
5. Lepaskan C+. The time is now set.

7.3 Format 12/24 Jam

To switch between 12-hour and 24-hour display, press the C+ dan H+ butang serentak.

7.4 Waktu Penjimatan Siang (DST)

To activate or deactivate Daylight Saving Time, press the C+ dan M+ buttons simultaneously. The display will show 'SUMMER' or 'WINTER' accordingly.

8. Arahan Pengendalian (Pengaturcaraan)

The timer allows for up to 10 ON/OFF programs with various weekday combinations.

8.1 Menetapkan Program HIDUP/MATI

1. Tekan ke PROG button (often labeled as 'P' or 'PROG' on similar models, or use RES/RCL if 'PROG' is not present, referring to Figure 1). The display will show '1 ON'.
2. Tekan W+ to select the desired day(s) of the week for this program. There are 16 different combinations (e.g., MO, TU, WE, TH, FR, SA, SU; MO-FR; SA-SU; MO-SA; MO,WE,FR; TU,TH,SA; MO-WE; TH-SA; MO-FR,SA; MO-SU).
3. Tekan H+ untuk menetapkan jam HIDUP.
4. Tekan M+ untuk menetapkan minit ON.
5. Tekan PROG sekali lagi. Paparan akan menunjukkan '1 OFF'.
6. Repeat steps 2-4 to set the OFF time for program 1.
7. Teruskan menekan PROG untuk mengitar semula program 2 ON, 2 OFF, sehingga 10 ON, 10 OFF.
8. Selepas menetapkan semua program yang dikehendaki, tekan butang C+ butang untuk kembali ke paparan masa semasa.

8.2 Pembatalan Manual

Tekan ke MANUAL butang untuk beralih melalui mod operasi:

• AUTO: The timer operates according to the programmed schedules.
• ON: Output sentiasa HIDUP, mengatasi semua program.
• MATI: Output sentiasa MATI, mengatasi semua program.

To return to automatic operation, press MANUAL until 'AUTO' is displayed.

9. Penyelenggaraan

9.1 Pembersihan

To clean the timer, wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure no liquids enter the device.

9.2 Bateri Sandaran

The timer includes an internal NiMH 1.2V rechargeable battery to maintain time and program settings during power outages. This battery is designed for long-term use and typically does not require replacement. If the display is blank or settings are lost frequently after power interruptions, the battery may need professional servicing.

10. Penyelesaian masalah

• Paparan kosong:
  Check power supply to the timer. Ensure the main power is ON. If power is present and the display remains blank, the internal backup battery might be fully discharged or faulty. Allow the timer to charge for several hours with power connected. If the issue persists, contact support.
• Program tidak berjalan:
  Ensure the timer is in 'AUTO' mode (check the MANUAL button setting). Verify that the current time and day are set correctly. Double-check your program settings for accuracy (ON/OFF times and selected weekdays).
• Masa tidak tepat:
  Reset the timer using the 'R' button and then re-set the current time and day. Check if Daylight Saving Time (DST) is incorrectly activated/deactivated.
• Appliance does not switch ON/OFF:
  Verify the wiring connections are correct and secure (refer to Section 6.2). Ensure the appliance itself is functional and properly connected. Check the timer's operating mode (AUTO, ON, OFF).

11. Spesifikasi

12. Sokongan & Waranti

For technical support or inquiries, please contact deleyCON customer service. Information regarding specific warranty terms may be available on the product packaging or the official deleyCON webtapak.