TMH TMH-25LED-R
TMH 6-Inch Oval Arrow LED Red Tail Lights (2-Pack) Instruction Manual

Rajah 1: Berakhirview of TMH 6-Inch Oval Arrow LED Red Tail Lights.
1. Pengenalan
Thank you for choosing TMH 6-Inch Oval Arrow LED Red Tail Lights. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new lights. Please read these instructions thoroughly before installation and retain this manual for future reference. These lights are designed for use as tail lights and turn signals on various vehicles including trucks, trailers, buses, and dump trucks, operating on a 12V DC system.

Imej 1.1: TMH 6-Inch Oval Arrow LED Red Tail Lights. This image displays two red oval LED lights, each featuring an arrow pattern. Four mounting screws are visible in the foreground.
Each light features 25 super bright F3 Piranha LEDs arranged in an arrow pattern, providing clear visibility and signaling.

Imej 1.2: LED Count and Arrow Pattern. This image provides a close-up view of the light's lens, clearly showing the 25 individual F3 Piranha LEDs arranged to form a distinct arrow shape.

Imej 1.3: F3 Piranha LED. This image shows a detailed view of the F3 Piranha LED component used in the lights, known for its brightness and durability.
2. Maklumat Keselamatan
- Always disconnect the vehicle's battery before performing any electrical work to prevent electrical shock or short circuits.
- Ensure all wiring connections are secure and properly insulated to prevent corrosion and electrical faults.
- Sahkan bahawa vol operasitage of your vehicle is 12V DC. Connecting to an incorrect voltage may damage the lights.
- Pakai peralatan pelindung diri yang sesuai, seperti cermin mata keselamatan dan sarung tangan, semasa pemasangan.
- Do not modify the lights or their components. Unauthorized modifications may void the warranty and create safety hazards.
- If you are unsure about any part of the installation process, consult a qualified automotive electrician.
3. Kandungan Pakej
Pakej termasuk item berikut:
- 2 x TMH 6-Inch Oval Arrow LED Red Tail Lights
- 4 x Skru Pemasangan
4. Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | TMH |
| Nombor Model | TMH-25LED-R |
| Jenis Cahaya | LED Tail Light / Turn Signal |
| Kuantiti LED | 25 Piranha LEDs per light |
| warna | Red Light & Red Lens |
| Fungsi | Tail Light (Low Brightness), Brake/Turn Signal (High Brightness) |
| Vol Operasitage | 12V DC |
| Wattage | 3.31 watt |
| Jenis Pemasangan | Lekapan Permukaan |
| Dimensi (L x W x H) | 7.5 x 3.3 x 1 inci |
| bahan | ABS Housing, Polycarbonate Lens |
| Ciri-ciri | Kalis Air, Kalis Kejutan, Kalis Habuk |
| UPC | 757347529700 |

Imej 4.1: Product Dimensions. This diagram illustrates the oval shape and measurements of the light, indicating a length of 7.5 inches, a width of 3.3 inches, and a depth of 1 inch.
5. Pemasangan
5.1 Semakan Pra-Pemasangan
- Ensure the mounting surface is clean, flat, and free from obstructions.
- Confirm that the vehicle's electrical system is 12V DC.
- Gather necessary tools: drill, screwdriver, wire strippers, crimpers, electrical tape or heat shrink tubing.
5.2 Arahan Pemasangan
- Position the light on the desired surface. Ensure the arrow pattern is oriented correctly for the intended signal direction.
- Mark the locations for the four mounting screws.
- Drill pilot holes if necessary, ensuring they are appropriately sized for the provided screws.
- Secure the light to the surface using the provided mounting screws. Do not overtighten.
5.3 Gambarajah Pendawaian dan Sambungan
The TMH LED Tail Lights feature a 3-wire connection system for dual-functionality (low brightness for tail light, high brightness for brake/turn signal).
- Kawat Hitam: Tanah (-)
- Kawat Merah: Low Brightness (Tail Light / Running Light) (+)
- Kawat Putih: High Brightness (Brake Light / Turn Signal) (+)
- Sambungkan Kawat hitam from the light to the vehicle's chassis ground or negative (-) terminal.
- Sambungkan wayar merah from the light to the vehicle's tail light or running light positive (+) circuit. This will activate the low brightness mode.
- Sambungkan wayar putih from the light to the vehicle's brake light or turn signal positive (+) circuit. This will activate the high brightness mode.
- Ensure all connections are secure and protected from moisture and abrasion using electrical tape or heat shrink tubing.

Imej 5.1: Wiring Diagram. This image illustrates the three-wire connection: black for ground, red for low brightness (tail light), and white for high brightness (brake/turn signal).

Imej 5.2: Two-Step Brightness Function. This image demonstrates the difference between the low brightness (Step 1) and high brightness (Step 2) modes of the LED light.
6. Operasi
Once properly installed and wired, the TMH 6-Inch Oval Arrow LED Red Tail Lights will operate as follows:
- When the vehicle's running lights or tail lights are activated, the lights will illuminate at kecerahan rendah (via the Red wire connection).
- When the vehicle's brake pedal is pressed or the turn signal is activated, the lights will illuminate at kecerahan tinggi (via the White wire connection). If used as a turn signal, the high brightness will flash according to the vehicle's flasher relay.
Nota: If you intend to use these lights solely as turn signals or emergency lights, a flasher relay or controller (not included) may be required for proper flashing functionality.
7. Penyelenggaraan
The TMH LED Tail Lights are designed for durability and minimal maintenance.
- Pembersihan: Clean the lens periodically with a soft cloth and mild soap and water to ensure maximum light output. Avoid abrasive cleaners or solvents.
- Pemeriksaan: Regularly inspect the lights and wiring for any signs of damage, loose connections, or corrosion. Address any issues promptly to maintain optimal performance and safety.
- Rintangan Cuaca: These lights are waterproof, shockproof, and dustproof, designed to withstand various environmental conditions.

Imej 7.1: Waterproof and Weatherproof Design. This image shows the light being exposed to water, highlighting its resistance to environmental elements.
8. Penyelesaian masalah
If you encounter issues with your TMH LED Tail Lights, refer to the following troubleshooting guide:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Lampu tidak menyala | No power supply, incorrect wiring, faulty ground connection, blown fuse. |
|
| Lights are dim or flicker | Sambungan elektrik yang lemah, volum tidak mencukupitage, corrosion in wiring. |
|
| Hanya satu tahap kecerahan berfungsi | Incorrect wiring for Red or White wire, faulty connection. |
|
If troubleshooting steps do not resolve the issue, please contact TMH customer support.
9. Waranti dan Sokongan
9.1 Maklumat Waranti
TMH provides a 1-year Premium TMH warranty for these LED Tail Lights, covering free replacement for manufacturing defects. Please retain your proof of purchase for warranty claims.
9.2 Sokongan Pelanggan
For technical assistance, warranty claims, or any questions regarding your TMH product, please visit the official TMH weblaman web atau hubungi jabatan sokongan pelanggan mereka.
TMH Brand Store: https://www.amazon.com/stores/TMH/page/47AA2177-AADC-4F12-A7C1-4D521FE33484