Manual Pengguna Set Lampu Basikal LuxPower

1. Produk Lebihview

Thank you for choosing the LuxPower Bike Light Set. This set includes a powerful 300-lumen LED headlight and a bright LED taillight, designed to enhance your visibility and safety during cycling. Both lights are rechargeable and water-resistant, making them ideal for various riding conditions.

Image 1.1: The LuxPower Bike Light Set, featuring the main headlight unit and the compact taillight unit.

2. Kandungan Pakej

Sila sahkan bahawa semua item yang disenaraikan di bawah disertakan dalam pakej anda:

• 1 x LuxPower LED Headlight (300 Lumens)
• 1 x LuxPower LED Taillight
• 2 x Kabel Pengecas USB
• 1 x Headlight Mounting Bracket
• 1 x Taillight Mounting Strap
• 1 x Manual Pengguna

Image 2.1: All components included in the LuxPower Bike Light Set package.

3. Persediaan dan Pemasangan

3.1 Pemasangan Lampu Depan

1. Attach the headlight mounting bracket to your bicycle's handlebar. Ensure it is securely fastened and positioned centrally.
2. Slide the LuxPower headlight onto the bracket until it clicks into place.
3. Adjust the angle of the headlight to illuminate the path ahead without blinding oncoming traffic.

Image 3.1: The LuxPower headlight securely installed on a bicycle handlebar.

3.2 Taillight Installation

1. Wrap the taillight mounting strap around your bicycle's seat post.
2. Secure the strap firmly, ensuring the taillight is facing directly backward.
3. Adjust the position to ensure maximum visibility from the rear.

Image 3.2: The LuxPower taillight installed on a bicycle seat post.

4. Arahan Operasi

4.1 Hidupkan/Mati Kuasa

• To turn on the light, press and hold the power button located on the top of the light unit for 2 seconds.
• To turn off the light, press and hold the power button again for 2 seconds.

4.2 Pemilihan Mod

Once the light is on, short press the power button to cycle through the available lighting modes:

• Tinggi: Maximum brightness for optimal visibility.
• Sederhana: Kecerahan seimbang untuk kegunaan umum.
• Rendah: Kecerahan dikurangkan untuk jangka hayat bateri yang lebih lama.
• Flash/Strobe: Flashing pattern for increased daytime visibility or emergency signaling.

4.3 Mengecas Lampu

Both the headlight and taillight are USB rechargeable. Use the provided USB cables for charging.

1. Locate the USB charging port on each light unit. It is typically covered by a rubber flap to protect against water.
2. Buka penutup getah dengan lembut.
3. Connect one end of the USB charging cable to the light's port and the other end to a USB power source (e.g., computer, wall adapter, power bank).
4. The indicator light will show the charging status (e.g., red for charging, green or blue for fully charged).
5. Once fully charged, disconnect the cable and firmly close the rubber flap to maintain water resistance.

Image 4.1: Both the headlight and taillight are USB rechargeable.

Image 4.2: The LuxPower headlight connected to a USB power source for charging.

Image 4.3: The LuxPower taillight connected to a USB power source for charging.

5. Penyelenggaraan

• Pembersihan: Wipe the light units with a soft, damp kain. Jangan gunakan pembersih atau pelarut yang melelas.
• Penjagaan Bateri: To prolong battery life, avoid fully discharging the lights frequently. Recharge them regularly, especially if they will be stored for an extended period.
• Storan: Store the lights in a cool, dry place away from direct sunlight and extreme temperatures.
• Tahan Air: Ensure the USB port rubber flap is always securely closed when not charging to maintain water resistance.

6. Penyelesaian masalah

7. Spesifikasi

8. Waranti dan Sokongan

LuxPower products are manufactured to high-quality standards. For information regarding warranty coverage, returns, or technical support, please refer to the contact information provided on the product packaging or visit the official LuxPower webtapak.

Sila simpan bukti pembelian anda untuk sebarang tuntutan waranti.