pengenalan
The FONESTAR BTX-3011 is a compact and lightweight Bluetooth audio transmitter designed to enable wireless audio streaming from your television or other audio sources to Bluetooth headphones or speakers. This manual provides detailed instructions for the safe and efficient use of your device, ensuring optimal performance and longevity.
Maklumat Keselamatan
- Jangan dedahkan peranti kepada kelembapan, hujan atau suhu yang melampau.
- Elakkan daripada menjatuhkan atau meletakkan peranti kepada kesan yang kuat.
- Jangan cuba membuka atau mengubah suai peranti. Ini akan membatalkan jaminan.
- Jauhkan daripada kanak-kanak.
- Use only the specified power source (5V DC via USB).
Kandungan Pakej
Sila pastikan semua item ada:
- FONESTAR BTX-3011 Bluetooth Audio Transmitter
- Integrated 3.5mm stereo auxiliary cable (30 cm)
- Integrated USB power cable
- Manual Pengguna (dokumen ini)
Produk Selesaiview
Image showing the compact design of the FONESTAR BTX-3011 Bluetooth Audio Transmitter, featuring its 3.5mm audio jack and USB power connector.
The BTX-3011 features a minimalist design with essential components for easy operation:
- Bicu Audio 3.5mm: Connects to the audio output of your TV, stereo system, or other audio source.
- USB Power Connector: Connects to a USB port for power supply.
- Lampu Penunjuk Status: Provides visual feedback on the device's operational status (pairing, connected).
Persediaan
Follow these steps to set up your FONESTAR BTX-3011 transmitter:
- Sambung ke Sumber Audio: Plug the integrated 3.5mm audio jack of the BTX-3011 into the audio output (e.g., headphone jack, AUX out) of your television, computer, or other audio device.
- Kuasakan Peranti: Plug the integrated USB power connector into a 5V DC USB port. This can be a USB port on your TV, a computer, a USB wall adapter (not included), or a power bank. The status indicator light will illuminate.
- Masukkan Mod Berpasangan: The BTX-3011 will automatically enter pairing mode when powered on. The status indicator light will flash rapidly, indicating it is ready to connect to a Bluetooth receiving device.
- Pair with Bluetooth Headphones/Speaker:
- Put your Bluetooth headphones or speaker into pairing mode. Refer to your audio device's manual for specific instructions.
- Place the headphones/speaker close to the BTX-3011.
- The BTX-3011 will automatically search for and connect to the nearest available Bluetooth audio receiver in pairing mode.
- Once connected, the status indicator light on the BTX-3011 will change to a steady illumination or flash slowly, depending on the connection status.
- Ujian Audio: Play audio from your source device. You should now hear the audio through your connected Bluetooth headphones or speaker. Adjust volume on your receiving device as needed.
Beroperasi
The FONESTAR BTX-3011 operates automatically once paired:
- Penyambungan Semula Automatik: After initial pairing, the transmitter will attempt to automatically reconnect to the last paired device when both are powered on and within range.
- Penunjuk Status: The LED indicator provides information about the device's state:
- Berkelip Pantas: Pairing mode, searching for a device.
- Cahaya Tetap: Successfully connected to a Bluetooth device.
- Julat: The effective transmission range is approximately 10 meters (33 feet) in an open environment. Obstacles and interference may reduce this range.
Penyelenggaraan
To ensure the longevity and proper functioning of your BTX-3011:
- Pembersihan: Lap peranti dengan kain lembut dan kering. Jangan gunakan pembersih cecair atau bahan yang melelas.
- Storan: Apabila tidak digunakan, simpan peranti di tempat yang sejuk dan kering, jauh dari cahaya matahari langsung dan suhu yang melampau.
- Penjagaan Kabel: Avoid bending or twisting the integrated cables excessively to prevent damage.
Menyelesaikan masalah
If you encounter issues with your BTX-3011, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tiada output audio. | Device not powered, not paired, or audio source issue. | Ensure USB power is connected. Verify BTX-3011 is paired (steady LED). Check audio source volume and output settings. |
| Cannot pair with headphones/speaker. | Headphones/speaker not in pairing mode, out of range, or already connected to another device. | Ensure your receiving device is in pairing mode. Move devices closer. Disconnect receiving device from other Bluetooth connections. Power cycle both devices. |
| Audio is intermittent or distorted. | Out of range, interference, or low battery on receiving device. | Move devices closer. Reduce obstacles between transmitter and receiver. Check battery level of headphones/speaker. Avoid strong Wi-Fi signals or other Bluetooth devices nearby. |
| Penunjuk LED tidak menyala. | Tiada bekalan kuasa. | Ensure the USB power cable is securely connected to a working 5V DC USB port. Try a different USB port or power adapter. |
Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Model | BTX-3011 |
| Jenama | FONESTAR |
| Teknologi Ketersambungan | Bluetooth, USB |
| Standard Tanpa Wayar | Bluetooth 3.0 EDR A2DP |
| Jarak Penghantaran | Sehingga 10 meter (33 kaki) |
| Input | 1 x 3.5mm Stereo Auxiliary Jack |
| Bekalan Kuasa | 5V DC via USB port |
| Dimensi (H x W x D) | 20 x 10 x 39 mm (anggaran) |
| Bateri boleh dicas semula | Not included (device is USB powered) |
| Alat Kawalan Jauh | Tidak termasuk |
Waranti dan Sokongan
FONESTAR products are designed for reliability and performance. For warranty information and technical support, please refer to the official FONESTAR website or contact your local dealer. Please retain your proof of purchase for any warranty claims.