Rigol DS1104Z-S Plus 100 MHz Digital Oscilloscope User Manual

1. Pengenalan

This manual provides essential information for the safe and efficient operation of your Rigol DS1104Z-S Plus 100 MHz Digital Oscilloscope. Please read this manual thoroughly before using the instrument to ensure proper functionality and to prevent damage. The Rigol DS1104Z-S Plus is a 4-channel digital storage oscilloscope designed for precise signal analysis with a 100 MHz bandwidth and a 1 GSa/s real-time sampkadar le.

Rigol DS1104Z-S Plus Digital Oscilloscope front view

Figure 1: Rigol DS1104Z-S Plus Digital Oscilloscope. This image shows the front panel of the oscilloscope with its display, control knobs, and input channels.

2. Maklumat Keselamatan

Sentiasa patuhi langkah berjaga-jaga keselamatan berikut untuk mengelakkan kecederaan dan kerosakan pada instrumen:

Sumber Kuasa: Connect the instrument only to a power source with the specified voltage dan kekerapan.
Pembumian: Pastikan instrumen dibumikan dengan betul untuk mengelakkan kejutan elektrik.
Pengudaraan: Do not block ventilation openings. Ensure adequate airflow around the instrument.
Persekitaran: Operate the oscilloscope in a dry, well-ventilated area, away from direct sunlight, high temperatures, and excessive dust.
Probe: Use only probes designed for the specified voltage dan penilaian kekerapan.
Servis: Refer all servicing to qualified service personnel. Do not attempt to repair the instrument yourself.
Pembersihan: Putuskan sambungan kuasa sebelum membersihkan. Gunakan yang lembut, damp kain. Jangan gunakan pembersih atau pelarut yang melelas.

3. Kandungan Pakej

Sahkan bahawa pakej anda mengandungi item berikut:

Rigol DS1104Z-S Plus Digital Oscilloscope
Kord Kuasa
Passive Probes (4 units)
Kabel USB
Panduan Cepat
Resource CD (User Manual, Programming Manual, Software)

4. Produk Lebihview

The Rigol DS1104Z-S Plus features a user-friendly interface and robust design for various measurement applications.

4.1 Panel Depan

The front panel includes the display, control knobs, function buttons, and input connectors for channels 1-4.

Skrin Paparan: Shows waveforms, measurement results, and menu options.
Kawalan Menegak: Laraskan voltage per division and position for each channel.
Kawalan Mendatar: Adjust time per division and horizontal position.
Kawalan Pencetus: Set trigger level, mode, and type.
Butang Fungsi: Access various menus such as Acquire, Measure, Storage, Utility, etc.
Channel Inputs (CH1-CH4): BNC connectors for probe connection.

4.2 Panel Belakang

The rear panel provides power input, USB host/device ports, and LAN port for connectivity.

Input Kuasa AC: Untuk menyambungkan kord kuasa.
Port Hos USB: Untuk menyambungkan peranti storan USB.
Port Peranti USB: For connecting to a PC.
Port LAN: Untuk sambungan rangkaian dan alat kawalan jauh.

5. Persediaan

5.1 Sambungan Kuasa

Pastikan suis kuasa pada panel belakang berada dalam kedudukan OFF.
Connect the provided power cord to the AC power input on the rear panel of the oscilloscope.
Pasangkan hujung kord kuasa yang satu lagi ke dalam soket kuasa AC yang dibumikan.

5.2 Sambungan Probe

Connect the BNC connector of a passive probe to one of the input channels (CH1, CH2, CH3, or CH4) on the front panel.
Connect the probe's ground clip to the circuit's ground reference.
Set the attenuation ratio on the probe to match the setting on the oscilloscope (e.g., 1X or 10X).

5.3 Kuasa Awal Hidup

Press the power switch on the rear panel to the ON position.
The oscilloscope will perform a self-test and display the Rigol logo.
After startup, the default waveform display will appear.

6. Arahan Operasi

This section covers basic operations for acquiring and analyzing waveforms.

6.1 Paparan Bentuk Gelombang Asas

Vertical Scale (VOLTS/DIV): Use the vertical scale knob for the active channel to adjust the voltage sensitiviti.
Kedudukan Menegak: Use the vertical position knob to move the waveform up or down on the screen.
Horizontal Scale (SEC/DIV): Use the horizontal scale knob to adjust the time base.
Kedudukan Mendatar: Use the horizontal position knob to shift the waveform left or right.

6.2 Pencetusan

Pencetusan menstabilkan bentuk gelombang berulang dan menangkap peristiwa satu tangkapan.

Tahap Pencetus: Laraskan tombol aras picu untuk menetapkan volumtage point at which the trigger occurs.
Trigger Menu: Tekan ke Trigger Menu button to configure trigger type (Edge, Pulse, Video, etc.), source, and slope.
Mod Pencetus: Select between Auto, Normal, and Single modes.

6.3 Fungsi Pengukuran

The oscilloscope offers various automatic measurement functions.

Tekan ke ukur button to display the measurement menu.
Select desired measurements such as Vpp, Vmax, Vmin, Freq, Period, Rise Time, etc.
The results will be displayed on the screen.

6.4 Menyimpan Data

Waveforms and settings can be saved to internal memory or a USB storage device.

Tekan ke Penyimpanan butang.
Select the storage type (Waveform, Setup, Image) and destination (Internal, USB).
Follow the on-screen prompts to save the data.

7. Penyelenggaraan

7.1 Pembersihan

To maintain the instrument's appearance and performance:

Putuskan sambungan kord kuasa sebelum membersihkan.
Gunakan kain lembut dampened with mild detergent and water to clean the exterior.
Jangan gunakan pembersih yang melelas, pelarut atau bahan kimia yang keras.
Pastikan tiada cecair memasuki instrumen.

7.2 Penentukuran

The oscilloscope is factory calibrated. For optimal performance, periodic calibration by qualified service personnel is recommended, typically every 1-2 years, depending on usage.

7.3 Penyimpanan

When not in use for extended periods, store the oscilloscope in a dry, dust-free environment within the specified operating temperature range.

8. Penyelesaian masalah

This section lists common problems and their solutions. If the problem persists, contact Rigol customer support.

Masalah	Kemungkinan Punca	Penyelesaian
Tiada paparan selepas dihidupkan	Power cord not connected; Power switch off; Faulty power outlet	Check power cord connection; Ensure power switch is ON; Test power outlet with another device
Tiada bentuk gelombang dipaparkan	Probe not connected; Incorrect channel settings; Trigger level incorrect; Input signal too small/large	Connect probe to active channel; Adjust vertical scale and position; Adjust trigger level; Check input signal source
Bentuk gelombang yang tidak stabil	Incorrect trigger settings; Noisy signal	Adjust trigger level and mode; Check signal source for noise; Use averaging acquisition mode
Cannot save data to USB	USB drive not formatted correctly; USB drive full; USB drive faulty	Format USB drive to FAT32; Delete unnecessary files; Try a different USB drive

9. Spesifikasi

Key technical specifications for the Rigol DS1104Z-S Plus Digital Oscilloscope:

Lebar jalur: 100 MHz
Saluran: 4 Saluran Analog
S masa nyataampkadar le: Up to 1 GSa/s
Kedalaman Memori: 12 Mpts (Standard), 24 Mpts (Optional)
Kadar Tangkapan Bentuk Gelombang: Sehingga 30,000 wfms/s
paparan: 7-inch TFT LCD (800x480 resolution)
Sensitiviti Menegak: 1 mV/div hingga 10 V/div
Julat Asas Masa: 2 ns/div hingga 50 s/div
Trigger Types: Edge, Pulse, Video, Slope, Alternate, Runt, Window, Delay, Setup/Hold, Nth Edge
Antara muka: USB Host, USB Device, LAN, Pass/Fail, Trigger Out
Sumber Kuasa: Elektrik Bertali
Berat Barang: 1 Kilogram
Pematuhan: CE

10. Waranti dan Sokongan

Rigol Technologies provides a standard warranty for its products. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Rigol website. For technical support, service, or inquiries, please contact your local Rigol distributor or Rigol customer service. Contact information can typically be found on the Rigol website or in the documentation provided with your oscilloscope.

rasmi Webtapak: www.rigol.com