Lenco L-30BK Belt Drive Turntable Instruction Manual

1. Pengenalan

This manual provides essential information for the safe and efficient operation of your Lenco L-30BK Belt Drive Turntable. Please read these instructions thoroughly before using the device and retain them for future reference. The Lenco L-30BK is designed for playing vinyl records at 33 and 45 RPM, featuring a built-in preamplifier and USB connectivity for digitizing your vinyl collection.

2. Maklumat Keselamatan

• Sumber Kuasa: Pastikan bekalan kuasa voltage sepadan dengan keperluan yang dinyatakan pada unit. Gunakan hanya penyesuai kuasa yang disediakan.
• Air dan Kelembapan: Jangan dedahkan unit kepada hujan, lembapan atau cecair menitis/percikan. Jangan letakkan objek yang diisi dengan cecair, seperti pasu, pada unit.
• Pengudaraan: Pastikan pengudaraan yang mencukupi. Jangan sekat bukaan pengudaraan.
• haba: Jauhkan unit daripada sumber haba seperti radiator, daftar haba, dapur, atau radas lain (termasuk amppenghidup) yang menghasilkan haba.
• Pembersihan: Cabut palam unit dari salur keluar dinding sebelum membersihkan. Gunakan kain lembut dan kering. Jangan gunakan pembersih cecair atau pembersih aerosol.
• Servis: Jangan cuba servis produk ini sendiri. Rujuk semua perkhidmatan kepada pegawai perkhidmatan yang berkelayakan.
• penempatan: Place the turntable on a stable, level surface to prevent vibrations and ensure proper playback.

3. Kandungan Pakej

Sila pastikan semua item yang disenaraikan di bawah disertakan dalam pakej:

• Lenco L-30BK Turntable Unit
• Penutup Habuk
• Platter
• Tali Pusing
• Slipmat
• Penyesuai Kuasa AC
• Kabel USB
• Kabel Audio RCA
• Manual Arahan
• Pick-up Needle (pre-installed on cartridge)

4. Produk Lebihview

Familiarize yourself with the components of your Lenco L-30BK turntable.

Rajah 4.1: Depan view of the Lenco L-30BK Turntable with the dust cover open, revealing the main components including the platter, tonearm, and control buttons.

Rajah 4.2: Rear panel connections of the Lenco L-30BK, including RCA audio outputs (L/R), USB port, DC12V power input, and the main power switch.

Komponen Utama:

• Pinggan: The circular platform where records are placed.
• Tonearm: Memegang kartrij dan stylus, yang membaca alur rekod.
• Cartridge and Stylus: Converts physical vibrations into electrical signals. The L-30BK features a Movable Magnet Sensor (MMC) with an individually replaceable stylus.
• Pemilih Kelajuan: Switch to select between 33 and 45 RPM playback speeds.
• Matikan Auto: Automatically stops the platter rotation at the end of a record.
• Penutup habuk: Melindungi meja putar daripada habuk apabila tidak digunakan.
• RCA Audio Outputs (L/R): Untuk menyambung ke luaran amppembesar atau pembesar suara aktif.
• Port USB: For connecting to a computer to digitize vinyl records.
• Input Kuasa DC12V: Untuk menyambungkan penyesuai kuasa.

5. Persediaan

5.1 Membongkar dan Meletakkan

1. Keluarkan meja putar dari bungkusannya dengan berhati-hati.
2. Place the unit on a stable, level surface, away from direct sunlight, heat sources, and excessive dust or vibrations.
3. Install the dust cover by aligning its hinges with the slots on the back of the turntable.

Rajah 5.1: The Lenco L-30BK Turntable with its protective dust cover closed, ready for placement.

5.2 Pemasangan Plat dan Tali Pinggang

1. Place the platter onto the turntable spindle.
2. Locate the drive belt, typically found underneath the platter or separately packaged.
3. Carefully stretch the drive belt around the motor pulley and the inner rim of the platter. Ensure the belt is not twisted.
4. Letakkan slipmat di atas pinggan.

5.3 Sambungan Audio

The L-30BK has a built-in preamplifier, allowing direct connection to most audio systems.

• Connect the RCA audio cable (red for right channel, white for left channel) from the AUDIO OUT jacks on the rear of the turntable to the LINE IN or AUX IN jacks on your amppembesar atau pembesar suara aktif.

5.4 Sambungan Kuasa

• Connect the DC12V power adapter to the DC12V POWER input on the rear of the turntable.
• Palamkan penyesuai kuasa ke salur keluar dinding yang sesuai.

5.5 USB Connection (for Digitization)

• To digitize your vinyl records, connect the USB cable from the USB port on the rear of the turntable to an available USB port on your computer (PC or Mac).

6. Arahan Operasi

6.1 Menghidupkan/Mematikan

• Flip the ON/OFF switch on the rear panel to the 'ON' position to power on the turntable.
• Flip the switch to 'OFF' when not in use.

6.2 Memainkan Rakaman

1. Letakkan rekod di atas pinggan, pastikan ia berada di tengah.
2. Select the appropriate speed (33 or 45 RPM) using the speed selector switch. For 45 RPM singles, place the included adapter on the spindle if needed.
3. Angkat lengan atas menggunakan tuil isyarat.
4. Manually position the tonearm over the desired starting groove of the record.
5. Gently lower the tonearm using the cueing lever. The stylus will descend onto the record, and playback will begin.
6. At the end of the record, the auto shut-off function will stop the platter rotation. Lift the tonearm and return it to its rest.

Rajah 6.1: Proper technique for lowering the tonearm onto a record for playback.

Rajah 6.2: Terperinci view of the Movable Magnet Sensor (MMC) cartridge and stylus assembly.

6.3 Digitizing Records via USB

The L-30BK allows you to convert your vinyl records into digital audio files menggunakan komputer.

1. Connect the turntable to your computer using the supplied USB cable.
2. Download and install audio recording software such as Audacity (available online for free) on your computer.
3. Open the recording software and select the USB Audio Device as the input source.
4. Start recording in the software, then begin playing your record on the turntable as described in section 6.2.
5. Once the record finishes, stop the recording in the software and save your digitized audio file.

7. Penyelenggaraan

7.1 Membersihkan Meja Putar

• Sentiasa cabut plag meja putar dari salur keluar kuasa sebelum membersihkan.
• Gunakan kain lembut, kering dan tidak berbulu untuk mengelap kabinet dan penutup habuk.
• Jangan gunakan pembersih, lilin atau pelarut yang melelas kerana ia boleh merosakkan kemasan.

7.2 Penjagaan dan Penggantian Stilus

• The stylus is a delicate component. Avoid touching it with your fingers.
• Clean the stylus regularly using a soft brush, gently brushing from back to front.
• The stylus should be replaced after approximately 300-500 hours of playback, or if you notice a degradation in sound quality.
• To replace the stylus, carefully pull the old stylus assembly forward and down from the cartridge. Insert the new stylus assembly by pushing it upwards and backwards into the cartridge until it clicks into place.

8. Penyelesaian masalah

If you encounter problems with your turntable, refer to the following common issues and solutions:

9. Spesifikasi

10. Waranti dan Sokongan

Lenco products are manufactured to high quality standards. In the event of a defect, your product is covered by the terms of the warranty in your country of purchase. For detailed warranty information, please refer to the warranty card included with your product or visit the official Lenco website. For technical support or service inquiries, please contact Lenco customer service through their official channels.