BEPER 40.300 Hair Clipper User Manual

1. Pengenalan

This manual provides essential instructions for the safe and effective use of your BEPER 40.300 Hair Clipper. Please read all instructions carefully before operating the device and retain this manual for future reference. The BEPER 40.300 is a rechargeable hair clipper equipped with ceramic and titanium blades, designed for precise cutting and comfortable handling.

2. Maklumat Keselamatan

• Pastikan perkakas kering. Jangan gunakannya berhampiran air atau dalam keadaan basah.
• Jangan rendamkan perkakas dalam air atau cecair lain.
• Jauhkan daripada kanak-kanak.
• Pastikan penyesuai kuasa serasi dengan bekalan kuasa tempatan anda.
• Cabut plag perkakas sebelum pembersihan atau penyelenggaraan.
• Do not use if the blades are damaged or broken, as this may cause injury.
• Only use original accessories provided by the manufacturer.

3. Kandungan Pakej

Buka kotak dengan berhati-hati dan pastikan semua item ada dan dalam keadaan baik. Jika ada barang yang hilang atau rosak, hubungi peruncit anda.

Image: The BEPER 40.300 Hair Clipper shown with all included accessories.

• BEPER 40.300 Hair Clipper
• Penyesuai Pengecasan
• Berus Pembersih
• Botol Minyak Pelincir
• 4 Interchangeable Comb Attachments (3mm, 6mm, 9mm, 12mm)

4. Produk Lebihview

Familiarize yourself with the main components of your hair clipper before use.

Imej: Sisi view of the BEPER 40.300 Hair Clipper, highlighting its ergonomic design.

• Ceramic and Titanium Blades: For precise and efficient cutting.
• Adjustable Rotary Ring: Allows for fine-tuning of cutting lengths from 0.8mm to 2mm.
• Suis kuasa: To turn the clipper on and off.
• Port Pengecasan: Untuk menyambungkan penyesuai pengecasan.
• Pemegang ergonomik: Direka untuk cengkaman dan kawalan yang selesa.

5. Persediaan

5.1 Mengecas Clipper

1. Pastikan pemotong dimatikan.
2. Connect the charging adapter to the charging port on the clipper.
3. Palamkan penyesuai ke salur keluar kuasa yang sesuai.
4. Allow approximately 8 hours for a full charge. A fully charged clipper provides up to 60 minutes of continuous operation.
5. Jangan cas bateri secara berlebihan. Cabut plag pengecas setelah pengecasan selesai.

5.2 Memasang Lampiran Sikat

The clipper comes with 4 comb attachments for different cutting lengths (3mm, 6mm, 9mm, 12mm).

1. Pastikan pemotong dimatikan.
2. Select the desired comb attachment.
3. Sejajarkan alat tambahan sikat dengan kepala penggunting dan luncurkannya sehingga ia berbunyi klik dengan kukuh pada tempatnya.
4. Untuk menanggalkannya, tolak alat tambahan sikat ke atas dengan lembut dan luncurkannya keluar.

6. Arahan Operasi

6.1 Operasi Asas

1. Ensure the clipper is fully charged or connected to power if using corded.
2. Select your desired cutting length using either the adjustable rotary ring or by attaching a comb guide.
3. Press the power switch to turn on the clipper.
4. Hold the clipper with the blades facing downwards and gently move it against the direction of hair growth.
5. For best results, use on clean, dry hair.
6. After use, press the power switch to turn off the clipper.

6.2 Adjusting Cutting Length (without comb attachment)

The rotary ring allows for precise adjustments of the blade length from 0.8mm to 2mm.

Image: Detail of the adjustable rotary ring on the BEPER 40.300 Hair Clipper, showing length settings.

• Rotate the ring located just below the blades to select your desired length: 0.8mm, 1.1mm, 1.4mm, 1.7mm, or 2mm.
• Ensure the ring clicks into place at the chosen setting before use.

6.3 Using Comb Attachments

For longer cutting lengths, use the provided comb attachments (3mm, 6mm, 9mm, 12mm).

• Attach the desired comb attachment as described in Section 5.2.
• The rotary ring setting will be overridden by the comb attachment.
• Move the clipper smoothly through the hair, ensuring the comb attachment remains flat against the scalp or skin.

7. Penyelenggaraan

Regular cleaning and maintenance will ensure optimal performance and extend the life of your hair clipper.

7.1 Membersihkan Bilah

1. Ensure the clipper is switched off and unplugged from the charger.
2. Remove any attached comb guide.
3. Gunakan berus pembersih yang disediakan untuk menanggalkan bulu-bulu longgar daripada bilah dan kepala penggunting.
4. For a more thorough clean, the blade set can be carefully detached (refer to specific instructions if provided with the product for blade removal). Rinse the detached blades under running water, ensuring the main body of the clipper does not get wet. Dry thoroughly before reattaching.
5. Jangan gunakan pembersih atau pelarut yang melelas.

7.2 Meminyaki Bilah

To maintain cutting performance, lubricate the blades regularly.

1. After cleaning, apply 1-2 drops of the provided lubricating oil to the blades.
2. Hidupkan penggunting rambut selama beberapa saat untuk membolehkan minyak diagihkan secara sekata.
3. Lap sebarang minyak yang berlebihan dengan kain lembut.

8. Penyelesaian masalah

If you encounter issues with your BEPER 40.300 Hair Clipper, refer to the following common problems and solutions:

Jika masalah berterusan selepas mencuba penyelesaian ini, sila hubungi sokongan pelanggan.

9. Spesifikasi

• model: 40.300
• Jenama: BEPER
• Bilah: Ceramic and Titanium
• Adjustable Cutting Lengths (without comb): 0.8mm, 1.1mm, 1.4mm, 1.7mm, 2mm
• Lampiran Sisir: 3mm, 6mm, 9mm, 12mm
• Sumber Kuasa: Rechargeable Battery (1 C battery included)
• Masa Pengecasan: Lebih kurang 8 jam
• Masa Operasi: Up to 60 minutes (fully charged)
• Bahan: Ceramic (blades)
• Dimensi: 27.6 x 20.8 x 6.2 cm (Pakej)
• Berat: 600 g (Pakej)
• ASIN: B076DC7MGS
• GTIN: 08051772717940

10. Waranti dan Sokongan

This product is covered by a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, spare parts, or any inquiries not covered in this manual, please contact BEPER customer service or your local retailer.

Simpan resit pembelian anda sebagai bukti pembelian untuk tuntutan waranti.