PWR+ AC Adapter Instruction Manual for Booster PAC Jump Starters

1. Pengenalan

This manual provides instructions for the safe and effective use of the PWR+ AC Adapter, model PWR-TAH19012N. This adapter is designed to provide power and charge compatible Booster PAC and CarStart jump starter models.

Image 1: The PWR+ AC Adapter with its integrated power cord.

2. Maklumat Keselamatan Penting

Read all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• UL Disenaraikan: This PWR+ AC Adapter is Tested, Approved, and Certified by UL/ULC (Underwriters Laboratories). The unique E475124 number is verifiable on the UL website, ensuring compliance with safety standards.
• Penggunaan Dalaman Sahaja: Use this adapter in dry, indoor environments only. Do not expose to rain or moisture.
• Pengudaraan yang Betul: Ensure adequate ventilation around the adapter during use. Do not cover the adapter or place it in an enclosed space.
• Elakkan Kerosakan: Do not use the adapter if the cord or plug is damaged. Do not attempt to open or repair the adapter.
• Perlindungan Terbina dalam: The adapter features Short Circuit Protection (SCP), Over Current Protection (OCP), Over Voltage Protection (OVP), and Over Temperature Protection (OTP) for enhanced safety.

Image 2: UL certification logo and a visual comparison highlighting the safety certification of the PWR+ adapter.

3. Kandungan Pakej

Pakej mengandungi item berikut:

• 1 x PWR+ AC Adapter (Model: PWR-TAH19012N)

Image 3: The PWR+ AC Adapter shown with its packaging.

4. Arahan Persediaan

1. Periksa Penyesuai: Before first use, visually inspect the AC adapter and its cord for any signs of damage. Do not use if damaged.
2. Sambung ke Peranti: Locate the charging port on your compatible Booster PAC or CarStart jump starter. Insert the barrel connector of the PWR+ AC Adapter firmly into the device's charging port.
3. Sambung ke Alur Kuasa: Plug the AC adapter's two-prong plug into a standard 110-240V wall outlet. Ensure the outlet is easily accessible.

The adapter features an extra-long 6.7 ft cord for flexible placement.

5. Arahan Operasi

Once connected, the PWR+ AC Adapter will begin charging your Booster PAC or CarStart jump starter. The charging indicator on your jump starter will typically illuminate or change state to indicate charging status. Refer to your jump starter's manual for specific charging indicators.

• Masa Pengecasan: Charging time varies depending on the jump starter model and its current battery level.
• Pemutusan sambungan: Once your device is fully charged, disconnect the adapter from the wall outlet first, then from your jump starter.
• Sambungan Berterusan: While the adapter has built-in safety features, it is generally recommended to disconnect the charger once the device is fully charged to prolong battery life.

6. Keserasian

This PWR+ AC Adapter is compatible with a wide range of Booster PAC and CarStart jump starter models, including but not limited to:

• Booster PAC ES6000, ES5000, ES5000C, ES2500, ES2500C, ES2500KE, ES1224
• Booster PAC J850, J900, J1000, J2000 Truck Pac Charger
• Booster PAC P/N: ESA214, ESA217, ESA218, ESA22, 141-003-000, 141-004-000, 141-337-000, DC1500500, GPU48180500WDOO, GPU481801000WD00
• CarStart CS1000, CS1200 Power Battery Booster
• Solar ES6000, ES6000KE, ES5000SOL, ES5000ESP5500, TCB-ESA217, ESA22, ES2500KE, ES2500SOL, ES2500KE, ESA217, ES5000ESP5500, J900-SOL, ESA-22, J850 Truck Pac Battery Booster Jump Starter

Imej 4: Bekasample of a compatible device, the Booster PAC ES2500 jump starter.

7. Spesifikasi

Imej 5: Terperinci view of the adapter's internal cable structure and built-in safety protections.

8. Penyelesaian masalah

• Peranti Tidak Mengecas:
  • Ensure the adapter is securely plugged into both the jump starter and the wall outlet.
  • Sahkan bahawa soket dinding berfungsi dengan memasang peranti lain.
  • Check if your jump starter model is listed in the compatibility section.
  • Inspect the adapter cord and connector for any visible damage.
• Penyesuai Terlalu Panas:
  • Pastikan penyesuai berada di kawasan pengudaraan yang baik dan tidak bertutup.
  • Jika terlalu panas berterusan, hentikan penggunaan dan hubungi sokongan pelanggan.

9. Penjagaan dan Penyelenggaraan

• Pembersihan: Disconnect the adapter from power before cleaning. Use a dry, soft cloth to wipe the adapter. Do not use liquid cleaners.
• Storan: Store the adapter in a cool, dry place away from direct sunlight and moisture when not in use. Avoid wrapping the cord too tightly around the adapter to prevent damage.
• Pengendalian: Elakkan daripada menjatuhkan penyesuai atau mendedahkannya kepada hentaman kuat.

10. Waranti dan Sokongan

This PWR+ AC Adapter comes with a Polisi bayaran balik 30 hari dan a Waranti pertukaran 24 bulan. PWR+ is a company based in Washington, USA, committed to customer satisfaction.

For warranty claims, technical support, or any inquiries, please contact PWR+ customer service through the retailer where the product was purchased or visit the official PWR+ webtapak.