sthus MS210, MS230, MS250

sthus Tune-Up/Service Kit for STIHL MS210, MS230, MS250 Chainsaws

Manual Arahan

1. Pengenalan

This manual provides essential information for the proper installation and maintenance of your sthus Tune-Up/Service Kit. This kit is designed to help maintain the performance of compatible STIHL chainsaw models by replacing key wear components. Please read this manual thoroughly before proceeding with any installation or service.

2. Produk Lebihview

The sthus Tune-Up/Service Kit includes the following components:

  • Palam Pencucuh
  • Penapis Udara
  • Penapis Bahan Api
sthus Tune-Up/Service Kit components: spark plug, air filter, and fuel filter

Gambar 2.1: Lebihview of the sthus Tune-Up/Service Kit components, including a spark plug, air filter, and fuel filter.

3. Keserasian

This sthus Tune-Up/Service Kit is compatible with the following STIHL chainsaw models:

  • STIHL MS210
  • STIHL MS230
  • STIHL MS250

Nota Penting:

Always verify the compatibility of replacement parts with your specific chainsaw model before installation. Refer to your chainsaw's original manual for detailed part specifications.

penuh view of a STIHL MS250 chainsaw

Gambar 3.1: Cthample of a compatible STIHL MS250 chainsaw.

4. Maklumat Keselamatan

AMARAN:

  • Always disconnect the spark plug wire before performing any maintenance to prevent accidental starting.
  • Ensure the chainsaw engine is cool before handling components.
  • Pakai peralatan pelindung diri (PPE) yang sesuai, termasuk sarung tangan dan pelindung mata.
  • Refer to your chainsaw's original owner's manual for specific safety precautions and procedures.
  • Keep all parts and tools away from children.

5. Panduan Pemasangan

Follow these steps for replacing the components of your tune-up kit. It is recommended to replace all components simultaneously for optimal performance.

5.1. Penggantian Palam Pencucuh

  1. Locate the Spark Plug: The spark plug is typically located on the top or side of the engine cylinder, covered by a rubber boot.
  2. Disconnect the Spark Plug Wire: Carefully pull the rubber boot and wire off the spark plug terminal.
  3. Remove the Old Spark Plug: Use a spark plug wrench to loosen and remove the old spark plug by turning it counter-clockwise.
  4. Install the New Spark Plug: Hand-thread the new spark plug into the cylinder head to avoid cross-threading. Once finger-tight, use the spark plug wrench to tighten it an additional 1/4 to 1/2 turn. Do not overtighten.
  5. Reconnect the Spark Plug Wire: Push the rubber boot firmly back onto the new spark plug terminal until it clicks into place.
Spark plug with dimensions: 55mm length, 13.6mm thread diameter

Figure 5.1.1: Dimensions of the spark plug included in the kit.

5.2. Penggantian Penapis Udara

  1. Access the Air Filter Housing: Depending on your chainsaw model, you may need to remove the top cover or a specific air filter cover. This usually involves unscrewing a few fasteners or releasing klip.
  2. Remove the Old Air Filter: Angkat penapis udara lama dengan berhati-hati. Perhatikan orientasinya untuk pemasangan penapis baharu yang betul.
  3. Bersihkan Perumahan: Wipe away any debris or sawdust from the air filter housing before installing the new filter.
  4. Install the New Air Filter: Place the new air filter into the housing, ensuring it fits snugly and seals properly.
  5. Selamatkan Perumahan: Reattach the air filter cover or top cover, ensuring all fasteners are tightened or clips are secured.
Location of the air filter housing on a STIHL MS250 chainsaw

Figure 5.2.1: Typical location of the air filter housing on a compatible chainsaw.

Close-up of the air filter included in the kit

Figure 5.2.2: The air filter component from the kit.

Air filter installed in a chainsaw housing

Gambar 5.2.3: Cthample of an air filter correctly installed in its housing.

5.3. Fuel Filter Replacement

  1. Drain Fuel Tank: It is advisable to drain the fuel tank before replacing the fuel filter to prevent spills.
  2. Cari Penapis Bahan Api: The fuel filter is typically located inside the fuel tank, attached to the end of the fuel line. You may need to use a hook or pliers to carefully retrieve it through the fuel tank opening.
  3. Remove the Old Fuel Filter: Disconnect the old fuel filter from the fuel line. Be prepared for a small amount of fuel to drip.
  4. Install the New Fuel Filter: Attach the new fuel filter securely to the fuel line. Ensure a tight connection to prevent leaks.
  5. Return to Tank: Carefully place the fuel filter back into the fuel tank.
  6. Isi Semula Bahan Api: Refill the fuel tank with the appropriate fuel mixture as specified by your chainsaw manufacturer.
Fuel filter with dimensions: 43mm length, 6.5mm nipple diameter

Figure 5.3.1: Dimensions of the fuel filter included in the kit.

6. Jadual Penyelenggaraan

Regular maintenance is crucial for the longevity and optimal performance of your chainsaw. The frequency of replacement for these components depends on usage and operating conditions.

  • Palam Pencucuh: Inspect every 25 hours of operation or annually. Replace if electrodes are worn, fouled, or damaged.
  • Penapis Udara: Clean after every 5-10 hours of operation or as needed in dusty conditions. Replace if cleaning does not restore proper airflow or if the filter is damaged.
  • Penapis Bahan Api: Inspect annually or every 50 hours of operation. Replace if clogged or damaged.

Always refer to your chainsaw's original owner's manual for the manufacturer's recommended maintenance schedule.

7. Penyelesaian masalah

If you encounter issues after installing the tune-up kit, consider the following common problems and solutions:

MasalahKemungkinan PuncaPenyelesaian
Engine does not start or runs poorly after spark plug replacement.Spark plug wire not securely connected; incorrect spark plug gap; faulty spark plug.Ensure wire is firmly attached. Check spark plug gap (refer to chainsaw manual). Re-install original spark plug to test if the new one is faulty.
Air filter does not fit properly or leaves gaps.Incorrect filter size or shape for specific chainsaw model.Double-check compatibility with your exact chainsaw model. Ensure the filter is seated correctly without bending or forcing.
Fuel leaks or engine runs lean after fuel filter replacement.Fuel filter not securely attached to fuel line; incorrect fuel filter size.Verify the fuel filter is tightly connected to the fuel line. Ensure the fuel line is not cracked or damaged.

If problems persist, consult a qualified service technician or refer to your chainsaw's official service manual.

8. Spesifikasi

The sthus Tune-Up/Service Kit components are designed to meet or exceed original equipment specifications for compatible models.

  • Palam Pencucuh: Standard replacement type for 2-stroke engines. (Approx. 55mm length, 13.6mm thread diameter)
  • Penapis Udara: Designed for specific STIHL MS210, MS230, MS250 models.
  • Penapis Bahan Api: Standard replacement type for 2-stroke engines. (Approx. 43mm length, 6.5mm nipple diameter)

Note: Dimensions are approximate and for reference only.

9. Maklumat Waranti

sthus products are manufactured to high-quality standards. For specific warranty details regarding this tune-up kit, please refer to the product packaging or contact sthus customer support directly. Keep your proof of purchase for warranty claims.

10. Sokongan Pelanggan

For further assistance, technical support, or inquiries regarding this product, please visit the official sthus store on Amazon or contact their customer service department.

sthus Store Link: Visit the sthus Store

© 2023 sthus. All rights reserved. Information in this manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.