1. Pengenalan
This manual provides detailed instructions for the installation, operation, and maintenance of your AIBOO Linkable Under Cabinet LED Lighting Kit. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Kandungan Pakej
Sahkan bahawa semua komponen yang disenaraikan di bawah disertakan dalam pakej anda:
- 10 x 12V LED Under Cabinet Puck Lights
- 1 x LED Hardwired Transformer with Wall Plug (AC120 to DC12V)
- 1 x Distributor (6-way splitter)
- 1 x Wireless RF Remote Controller (including a receiver and a remote)
- 4 x Extension Cables (5ft each)
- 10 x Double-Sided Adhesive Stickers
- 20 x Skru
3. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Jenama | AIBOO |
| Nombor Model | YK-300000197 |
| Warna Cerah | Putih Hangat |
| Suhu Warna | 2700 Kelvin |
| Fluks Bercahaya | 1000 Lumen (Total for 10 lights) |
| Wattage | 20.00 Watts (Total for 10 lights) |
| Voltage | 12 Volt |
| Puck Light Dimensions (L x W x H) | 2.36 x 2.36 x 0.31 inci (6 x 6 x 0.8 cm) |
| Sumber Kuasa | Corded Electric (Hardwired or Wall Plug-in) |
| Kaedah Kawalan | Alat Kawalan Jauh RF Tanpa Wayar |
| Ciri Khas | Dimmable, Linkable (Series Connection) |
| Penggunaan Dalaman/Luar | Dalaman |
| Tahap Ketahanan Air | Bukan Tahan Air |
| Bateri Diperlukan (untuk alat kawalan jauh) | 1 bateri CR2 (termasuk) |
4. Persediaan dan Pemasangan
The AIBOO Linkable Under Cabinet LED Lighting Kit offers two installation methods: hardwired or wall plug-in. Choose the method that best suits your needs.
4.1. Langkah Pemasangan Umum
- Reka Letak Pelan: Determine the desired placement for each puck light under your cabinets or shelves. Ensure the cables can reach the distributor and power source.
- Lampu Gunung Puck:
- Adhesive Method: Clean the mounting surface thoroughly. Peel the backing from the double-sided adhesive sticker and firmly press it onto the back of the puck light. Then, press the light onto the desired surface.
- Screw Method: Use the provided screws to secure the puck lights to the desired surface. Ensure the screws are tightened securely but do not overtighten.
- Connect Lights to Distributor: Connect the cables from each puck light to the 6-way distributor. Use the 5ft extension cables as needed to bridge longer distances between lights or to the distributor. The linkable design allows for simple wiring management.
- Connect Distributor to Receiver: Plug the distributor into the wireless RF remote receiver.
- Connect Receiver to Power Adapter: Plug the receiver into the 12V LED hardwired transformer/wall plug-in adapter.
- Sambungan Kuasa:
- Wall Plug-in: Plug the power adapter into a standard AC120V wall outlet.
- Berwayar keras: For hardwired installations, consult a qualified electrician. Ensure power is disconnected before attempting any hardwiring.
5. Arahan Operasi
The lighting kit is controlled by a wireless RF remote control, allowing for convenient operation.
5.1. Fungsi Alat Kawalan Jauh
- HIDUP/MATI: Press the "ON" button to turn the lights on, and "OFF" to turn them off.
- Pelarasan Kecerahan:
- "LIGHT +" / "BRIGHT +": Increases brightness.
- "LIGHT -" / "BRIGHT -": Decreases brightness.
- Preset levels: Buttons for 100%, 50%, and 25% brightness.
- Berpasangan: If the remote does not control the lights, press "Pair" or "Decode" until the lights flicker. This indicates successful pairing.
- Tetapan Masa: Buttons for 1H, 2H, 4H, and 8H allow you to set an automatic shut-off timer for 1, 2, 4, or 8 hours respectively.
6. Penyelenggaraan
To ensure the longevity and optimal performance of your AIBOO LED lighting kit, follow these maintenance guidelines:
- Pembersihan: Disconnect power before cleaning. Use a soft, dry cloth to gently wipe the puck lights and other components. Avoid abrasive cleaners, solvents, or excessive moisture, as these can damage the product.
- Pengurusan Kabel: Periodically check all cable connections to ensure they are secure. Avoid placing heavy objects on cables or bending them sharply, which can cause damage.
- Bateri Jauh: If the remote control's range or responsiveness decreases, replace the CR2 battery. Refer to the remote's battery compartment for instructions on replacement.
- Keadaan Persekitaran: Produk ini direka bentuk untuk kegunaan dalaman sahaja. Elakkan pendedahan kepada air, kelembapan tinggi atau suhu yang melampau.
7. Penyelesaian masalah
If you encounter issues with your AIBOO LED lighting kit, refer to the following common troubleshooting steps:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Lampu tidak menyala. |
|
|
| Lampu berkelip-kelip atau malap tanpa diduga. |
|
|
| Alat kawalan jauh tidak bertindak balas. |
|
|
8. Maklumat Waranti
AIBOO products are typically covered by a manufacturer's warranty. For specific details regarding the warranty period and terms for your YK-300000197 lighting kit, please refer to the documentation included with your purchase or contact AIBOO customer support directly. Keep your purchase receipt as proof of purchase.
9. Sokongan Pelanggan
For further assistance, technical support, or inquiries regarding your AIBOO Linkable Under Cabinet LED Lighting Kit, please contact AIBOO customer service. Contact information can usually be found on the product packaging or the official AIBOO webtapak.
The seller for this product is AIBOO Lighting. For support, you may visit their store page on Amazon or contact them through the Amazon platform.
