1. Produk Lebihview
The TSL LTN8608-P8 is a professional-grade 8-channel Network Video Recorder (NVR) designed for advanced surveillance systems. This quad-core NVR supports live view, storage, and playback of IP cameras up to 12.3MP resolution, offering high-definition video recording and management capabilities. It features an 80MB input bandwidth and 8 built-in Power over Ethernet (PoE) ports for direct camera connection, simplifying installation.
The NVR provides versatile video output options including 4K (3840x2160) HDMI, VGA, and CVBS. It supports up to two SATA hard drives, each up to 12TB (hard drives are not included and must be purchased separately for recording). Advanced features include support for 6MP/12.3MP fisheye cameras and compatibility with H.264, H.264 Zip+, and H.265 video compression formats for efficient storage.
2. Ciri-ciri Utama
- Quad-core 8 Channel Network Video Recorder.
- Supports Live View, Storage, and Playback up to 12.3MP IP Camera resolution.
- 80MB Input Bandwidth for efficient data handling.
- 8 Built-in PoE ports for direct camera power and data.
- 4K (3840x2160) HDMI, VGA, and CVBS Video Output.
- Supports 2 SATA hard drives up to 12TB each (hard drives not included).
- 4 POS (Point of Sale) via TCP/IP support.
- Compatible with 6MP / 12.3MP Fisheye cameras.
- Supports H.264, H.264 Zip+, and H.265 video compression.
3. Kandungan Pakej
Please check the package contents upon opening. If any items are missing or damaged, contact your vendor immediately.
- TSL LTN8608-P8 8-Channel 4K NVR Unit
- Penyesuai Kuasa
- Tetikus USB
- SATA Cables and Screws for HDD Installation
- Panduan Mula Pantas / Manual Pengguna (dokumen ini)
- Network Cable (may vary by package)
4. Penerangan Fizikal
4.1 Panel Depan
Figure 4.1: Front Panel of the LTN8608-P8 NVR
The front panel of the LTN8608-P8 NVR features several indicators and controls for direct interaction with the device. On the left, the "LTS" logo is visible. Towards the center, there are LED indicators for POWER, READY, STATUS, ALARM, and HDD activity, providing quick visual feedback on the NVR's operational status. To the right, a set of numerical and function buttons (1-9, 0) are present, including dedicated buttons for MENU, ESC, SHIFT, PLAY, REC, PTZ, and PREV. A directional pad with an 'Enter' button is located further to the right for navigation. A USB port is also conveniently located on the far right for connecting peripherals like a mouse or USB drive.
4.2 Rear Panel (Typical)
While not pictured, the rear panel typically includes:
- Input Kuasa
- Output HDMI
- Output VGA
- Output CVBS
- Ethernet Ports (LAN and PoE ports)
- Input/Output Audio
- Input / Output Penggera
- Port USB Tambahan
- RS-485 Port (for PTZ control)
5. Panduan Persediaan
5.1 Pemasangan Pemacu Keras (Pilihan)
The NVR does not include a hard drive. A hard drive is required for recording video. Refer to the detailed instructions in the full manual for proper installation of SATA hard drives. Ensure the NVR is powered off and disconnected from the power source before opening the casing.
5.2 Sambungan Awal
- Sambung Monitor: Sambungkan monitor ke port output HDMI atau VGA NVR.
- Sambung Tetikus: Pasangkan tetikus USB ke salah satu port USB NVR (depan atau belakang).
- Sambungkan Kamera: Connect IP cameras to the NVR's built-in PoE ports using Ethernet cables. For non-PoE cameras or cameras connected to an external PoE switch, connect them to the same network as the NVR.
- Sambungkan ke Rangkaian: Connect the NVR's LAN port to your network router or switch using an Ethernet cable.
- Sambungkan Kuasa: Sambungkan penyesuai kuasa ke input kuasa NVR dan kemudian ke soket kuasa.
5.3 Wizard Persediaan Kali Pertama
Upon first boot, the NVR will typically launch a setup wizard. Follow the on-screen prompts to configure basic settings such as language, date/time, network settings, password, and hard drive initialization.
6. Arahan Operasi
6.1 Langsung View
Selepas persediaan berjaya, NVR akan memaparkan secara langsung view of connected cameras. Use the mouse or front panel controls to switch between single-channel view, multi-channel view, or sequence display.
6.2 Rakaman
Recording can be configured for continuous, motion detection, alarm, or scheduled modes. Access the "Record" menu from the main interface to set up recording schedules and parameters for each channel.
6.3 Main semula
Untuk kembaliview dirakam footage, enter the "Playback" menu. Select the desired date, time, and channel(s) to begin playback. Options for fast forward, rewind, pause, and frame-by-frame playback are available.
6.4 Akses Jauh
The NVR supports remote access via a web browser or dedicated mobile applications. Ensure the NVR is connected to the internet and port forwarding is configured on your router if necessary. Refer to the network settings section in the full manual for detailed instructions on remote access setup.
7. Penyelenggaraan
- Pembersihan tetap: Pastikan unit NVR bersih dan bebas daripada habuk. Gunakan kain lembut dan kering. Jangan gunakan pembersih cecair.
- Kemas kini Firmware: Periksa pengeluar secara berkala webtapak untuk kemas kini perisian tegar bagi memastikan prestasi dan keselamatan yang optimum. Ikut arahan kemas kini dengan teliti.
- Kesihatan Cakera Keras: Monitor the health of your hard drives through the NVR's system information menu. Replace failing drives promptly to prevent data loss.
- Konfigurasi Sandaran: Regularly back up the NVR's configuration settings to a USB drive to facilitate quick restoration if needed.
- Keadaan Persekitaran: Ensure the NVR is operated within recommended temperature and humidity ranges to prolong its lifespan.
8. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tiada output video pada monitor. | Loose cable connection, incorrect input selected on monitor, NVR not powered on. | Check HDMI/VGA cable connections. Ensure monitor is on correct input. Verify NVR power LED is lit. |
| Kamera tidak dipaparkan. | Camera not powered, network issue, incorrect IP address, camera not added to NVR. | Check camera power and network cables. Ensure cameras are properly added/discovered by the NVR. Verify IP addresses. |
| Tidak boleh mengakses NVR dari jauh. | Network configuration issues, incorrect port forwarding, firewall blocking. | Verify NVR network settings. Check router's port forwarding rules. Disable temporary firewalls for testing. |
| Tiada rakaman. | No hard drive installed, hard drive not initialized, recording schedule not set. | Install and initialize a hard drive. Configure recording schedules in the NVR menu. |
For more detailed troubleshooting steps, please refer to the comprehensive troubleshooting section in the full user manual or contact technical support.
9. Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | LTN8608-P8 |
| Saluran | 8 Saluran |
| Sokongan Resolusi Maks | Up to 12.3MP IP Camera |
| Lebar Jalur Input | 80MB |
| Pelabuhan PoE | 8 Built-in PoE |
| Output Video | 4K (3840x2160) HDMI, VGA, CVBS |
| Sokongan SATA | 2 SATA interfaces, up to 12TB each (HDD not included) |
| POS Support | 4 POS via TCP/IP |
| Sokongan Fisheye | 6MP / 12.3MP Fisheye |
| Pemampatan Video | H.264/H.264 Zip+, H.265 Ready |
| Dimensi Produk | 15"P x 12.4"L x 2"T (15 x 12.4 x 2 inci) |
| Berat Barang | 8.5 paun |
| Pengeluar | LTS |
| Teknologi Ketersambungan | VGA, HDMI |
10. Waranti dan Sokongan
This TSL product is covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official TSL website. For technical support, product inquiries, or service requests, please contact your authorized dealer or the manufacturer's customer service department. Keep your purchase receipt as proof of purchase for warranty claims.
Sumber Dalam Talian: For the latest drivers, firmware, and detailed documentation, please visit the official TSL support webtapak.