1. Pengenalan dan Lebihview
This manual provides detailed instructions for the safe installation, operation, and maintenance of your ET2 Blade-19W LED Pendant Light. The Blade-19W features a sleek, half-inch aluminum blade design with an integrated LED board, creating a distinct lighting effect. Please read this manual thoroughly before proceeding with installation or use.
Figure 1: ET2 Blade-19W LED Pendant Light
2. Maklumat Keselamatan
- AMARAN: Risiko renjatan elektrik. Putuskan sambungan kuasa pada pemutus litar atau kotak fius sebelum pemasangan atau servis.
- All electrical connections must be in accordance with local and National Electrical Code (NEC) standards. If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician.
- Lekapan ini bertujuan untuk kegunaan dalaman sahaja. Jangan dedahkan kepada air atau kelembapan.
- Jangan cuba mengubah suai lekapan. Sebarang pengubahsuaian boleh membatalkan waranti dan menimbulkan bahaya keselamatan.
- Kendalikan lekapan dengan berhati-hati bagi mengelakkan kerosakan pada komponen LED.
3. Kandungan Pakej
Sahkan bahawa semua komponen ada dan tidak rosak sebelum memulakan pemasangan:
- LED Pendant Fixture (1)
- Mounting Canopy (1)
- Mounting Hardware Kit (screws, wire nuts, etc.) (1)
- Manual Arahan (1)
4. Persediaan dan Pemasangan
Alat yang Diperlukan (tidak termasuk): Phillips screwdriver, flathead screwdriver, wire strippers, electrical tape, safety glasses.
- Matikan Kuasa: Before starting, ensure the power to the circuit where you are installing the fixture is turned off at the main circuit breaker or fuse box.
- Sediakan Permukaan Pemasangan: Ensure the ceiling junction box is securely mounted and capable of supporting the fixture's weight (approximately 2.5 lbs).
- Pasang Pendakap Pelekap: Secure the mounting bracket (typically pre-attached to the canopy) to the junction box using the provided screws.
- Laraskan Ketinggian Loket: The pendant cables are adjustable. Determine the desired hanging height for the fixture. Adjust the cable length by pressing the pin on the canopy's cable grip and sliding the cable to the desired length. Ensure both cables are adjusted evenly.
- Buat Sambungan Elektrik: Connect the fixture's wires to the corresponding wires from the junction box using the provided wire nuts.
- Sambungkan hitam wayar lekapan ke hitam Wayar bekalan (hidup).
- Sambungkan putih wayar lekapan ke putih Wayar bekalan (Neutral).
- Sambungkan tembaga hijau/telanjang wayar lekapan ke tembaga hijau/telanjang Wayar bekalan (Ground).
- Kanopi Gunung: Carefully push the canopy up to the ceiling, aligning the mounting screws on the bracket with the holes in the canopy. Secure the canopy in place with the decorative nuts or screws provided.
- Pulihkan Kuasa: Setelah pemasangan selesai, pulihkan kuasa pada pemutus litar.
Figure 2: Product Dimensions and Canopy Details
5. Arahan Operasi
The ET2 Blade-19W LED Pendant Light is designed for simple operation. Once properly installed and powered, the light can be controlled via a remote control (if supplied with your specific model) or a standard wall switch connected to the fixture's circuit.
- Hidupkan/Mati Kuasa: Use the wall switch or remote control to turn the light on or off.
- Warna terang: This fixture emits a warm white light.
6. Penyelenggaraan
To ensure the longevity and appearance of your pendant light, follow these simple maintenance guidelines:
- Pembersihan: Sentiasa putuskan sambungan kuasa sebelum membersihkan. Lap lekapan dengan kain lembut dan kering. Jangan gunakan pembersih, pelarut atau pengilat yang melelas kerana ia boleh merosakkan kemasan atau komponen elektrik.
- LED: The integrated LED light source is designed for long-term use and is not user-replaceable. Do not attempt to open or service the LED module.
7. Penyelesaian masalah
Jika lampu gantung anda tidak berfungsi dengan betul, rujuk isu dan penyelesaian biasa berikut:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Cahaya tidak menyala. | Tidak ada kekuatan untuk perlawanan. | Check the circuit breaker or fuse. Ensure the wall switch is in the ON position. Verify all electrical connections are secure. |
| Cahaya berkelip atau malap. | Sambungan pendawaian longgar. | Turn off power and check all wire connections for tightness. |
| Fixture is damaged. | Physical damage during installation or shipping. | Contact customer support for assistance. Do not attempt to repair. |
8. Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | ET2 |
| Nombor Model | E22903-AL |
| Dimensi (L x W x H) | 32"L x 0.5"W x 3"H |
| Berat Barang | 2.5 paun |
| bahan | aluminium |
| Jenis Selesai | Aluminium Berus |
| Sumber Cahaya | LED |
| Bilangan Sumber Cahaya | 1 |
| Wattage | 19 watt |
| Voltage | 120 Volt |
| Warna Cerah | Putih Hangat |
| Indeks Paparan Warna (CRI) | 80+ |
| Jenis Pemasangan | Pemasangan Siling |
| Jenis Pemasangan | Pemasangan Semi Flush |
| Penggunaan Dalaman/Luar | Dalaman |
| Kaedah Kawalan | Jauh |
9. Waranti dan Sokongan
This ET2 Blade-19W LED Pendant Light is covered by a Waranti terhad pengeluar 1 tahun dari tarikh pembelian. Waranti ini melindungi kecacatan pada bahan dan mutu kerja di bawah penggunaan biasa.
For warranty claims, technical support, or replacement parts, please contact ET2 customer service. Keep your purchase receipt as proof of purchase.
Maklumat Hubungan:
Please refer to the ET2 official website or your retailer's contact information for the most current support details.